Skip to content

Kia Ceed 2011 Key Fob & Car Keys

Keys that fit the 2006–2011 Kia Ceed: flip keys and remote keys. 2 compatible keys, remotes & shells (genuine and aftermarket) available for the 2011 Kia Ceed.

Last updated: 6 November 2026

Key specifications for the Kia Ceed 2006–2011

Key types
flip keys, remote keys, emergency blades and key blanks
Part numbers
81926-2L000 · 81996-2L000

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Kia parts catalogue, with the specifications on each listing.

A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.

Programming the Kia Ceed 2011 key

Key with a blade (regular or flip)

3 tools list this key. 3 of them list all keys lost.

    • Add key
    • All keys lost(non-US cars)
    • Remote
    PIN read function
  • OBDSTAR Key Master G3
    • Add key
    • All keys lost
    • Remote
    reads the PIN by OBD
  • XTOOL X100 PAD3 / X100 MAX
    • Add key
    • All keys lost
    • Remote
    reads the PIN by OBD

Programming steps

Add key - Lonsdor K518(GCC / Europe cars)

Needs: every key the customer keeps (all are taught again), new transponder key or flip remote with the right chip, cut to the lock, 6-digit PIN: tool PIN read where the tool list offers it for this car and chip, otherwise by VIN from the dealer, battery support (stable 12 V)

  1. Check the cluster shows an immobilizer lamp at ignition ON (US turn-key cars without one: use the US no-immobilizer case).
  2. Connect the K518 by OBD, choose the car and open the immobilizer key programming menu.
  3. Get the PIN: tool PIN read where offered, otherwise by VIN from the dealer.
  4. Start Key learning, switch the ignition ON with the first key and enter the PIN.
  5. Teach the first key; when asked, switch off, insert the next key and switch ON within about 10 seconds. Repeat for every key, the working ones included.
  6. Leave the ignition off for about 10 seconds, then start with each key.
  7. Learn the remotes with Transmitter code saving.
Watch out: Key teaching rebuilds the key list: a key not presented in the same session stops starting the car. Bring every key the customer keeps. Three wrong PIN entries lock key teaching for one hour; disconnecting the battery does not shorten the wait. The transponder and the remote buttons are learned separately on blade / flip keys: a key that starts the car may still not lock or unlock until Transmitter code saving is done. Up to 8 transponder keys and 4 remotes.
All keys lost - Lonsdor K518(GCC / Europe cars)

Needs: two new transponder keys or flip remotes cut to the lock (by key code or decoding), 6-digit PIN: tool PIN read where the tool list offers it for this car and chip, otherwise by VIN from the dealer, battery support (stable 12 V)

  1. Cut a new key to the door / ignition lock so the ignition can be switched ON.
  2. Connect the K518 by OBD, choose the car and open the immobilizer key programming menu.
  3. Get the PIN: tool PIN read where offered, otherwise by VIN from the dealer.
  4. Start Key learning, switch the ignition ON with the first key and enter the PIN.
  5. Teach each new key in turn (switch off, next key, ON within about 10 seconds).
  6. Leave the ignition off for about 10 seconds, then start with each key.
  7. Learn the remotes with Transmitter code saving.
Watch out: Three wrong PIN entries lock key teaching for one hour; disconnecting the battery does not shorten the wait. Lost keys stop starting the car once the new set is taught. The transponder and the remote buttons are learned separately on blade / flip keys: a key that starts the car may still not lock or unlock until Transmitter code saving is done.

Key type not stated by the list

One tool lists this key.

  • Launch X-431 IMMO
    • Add key
    • Remote
    PIN read function

When the key changed

Smart key (push to start)

  • 2012 - 2018Chip: ID46433 MHz(GCC / Europe cars)Second generation (JD) smart key, push-start trims.
  • from 2022Chip: 4A433 MHzFCC: FG01461(GCC / Europe cars)Some 2020-2023 smart keys are 8A (95440-J7000 / J7501): read the key.

Key with a blade (regular or flip)

  • 2006 - 2012This yearChip: ID46433 MHz(GCC / Europe cars)First generation (ED) remote and flip keys.
  • 2012 - 2018Chip: DST80433 MHzFCC: DD3TX1302-JD(GCC / Europe cars)Second generation (JD) flip key; chip sold as 4D60 80-bit.
  • 2018 - 2021Chip: 8A433 MHzFCC: TG00520(GCC / Europe cars)Third generation (CD) flip key.

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the Kia Ceed 2006–2011?

2 listings fit the Kia Ceed 2006–2011: flip keys, remote keys, emergency blades and key blanks. Match the part number or FCC ID printed on your original key with the specifications on each listing.

Which tools program a Kia Ceed 2006–2011 key?

The tool makers' coverage lists name Lonsdor K518, OBDSTAR Key Master G3, XTOOL X100 PAD3 / X100 MAX and Launch X-431 IMMO for this car; 3 of them list all keys lost. Check your tool's latest coverage list before the job.