Skip to content

Kia EV6 2022 Key Fob & Car Keys

Keys that fit the 2022 Kia EV6: smart keys and remote keys, 3, 4 or 6 buttons, FCC ID CQ0FD00790, CQ0FD01340 or CQ0FN01050, 4A (HITAG AES) or ID46 / ID47 / ID4A (writable) chip, 433 MHz. 6 compatible keys, remotes & shells (genuine and aftermarket) available for the 2022 Kia EV6.

Last updated: 10 November 2026

Key specifications for the Kia EV6 2022

Key types
smart keys, remote keys, emergency blades and key blanks
Frequency
433 MHz
Buttons
3-, 4-, 6- and 7-button
Transponder chip
4A (HITAG AES) · ID46 / ID47 / ID4A (writable)
Blade profile
KK12
Part numbers
95440-CV000 · 95440-CV010
Battery
CR2032

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Kia parts catalogue, with the specifications on each listing. Every remote listed for the Kia EV6 2022 transmits on 433 MHz.

A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.

Programming the Kia EV6 2022 key

Smart key (push to start)

5 tools list this key. 2 of them list all keys lost.

    • Add key
    • All keys lost
    • Add key
    • All keys lost(US / Canada cars)
  • OBDSTAR Key Master G3
    • Add key
    • Remote
    reads the PIN by OBD
  • Advanced Diagnostics Smart Pro
    • Add key
    online calculation · PIN read function
    Needs: AD ADC2000 cable, AD Smart Aerial
  • Launch X-431 IMMO
    • Add key

All keys lost is listed by Autel IM608 II / IM608 Pro II and Lonsdor K518. OBDSTAR Key Master G3, Advanced Diagnostics Smart Pro and Launch X-431 IMMO list add key only.

Programming steps

Add key - Autel MaxiIM IM608

Needs: every fob the customer keeps (all are erased and learned again), new, never-learned smart key with the right chip and frequency, 6-digit PIN: tool PIN read where the tool list offers it for this car and chip, otherwise by VIN from the dealer

  1. Connect the IM608 by OBD, identify the car (VIN, or model and year) and open the Smart key system.
  2. Get the PIN: the tool's PIN function for the key type, or by VIN from the dealer.
  3. Start Smart key learning and accept the warning that all fobs will be erased.
  4. Ignition OFF, then enter the PIN when the tool asks.
  5. Press OK, then within 5 seconds press the start button with the first fob until the tool confirms (cars with a fob slot or holder: put the fob in it).
  6. Repeat for every fob, the old ones included; stop after the last one.
  7. Check that each fob locks, unlocks and starts the car.
Watch out: Smart key learning erases every fob first: all fobs the customer keeps must be learned again in the same session. A fob that was learned to another car cannot be learned again (Hyundai: permanently tied to the first VIN). Use a new fob with the right chip and frequency. Three wrong PIN entries lock key teaching for one hour; disconnecting the battery does not shorten the wait. Most of these cars take 2 fobs; some accept a 3rd (the tool asks after the 2nd fob).
Add key - Lonsdor K518(US / Canada cars)

Needs: every fob the customer keeps (all are erased and learned again), new, never-learned smart key with the right chip and frequency, 6-digit PIN: tool PIN read where the tool list offers it for this car and chip, otherwise by VIN from the dealer

  1. Connect the K518 by OBD, identify the car (VIN, or model and year) and open the Smart key system.
  2. Get the PIN: the tool's PIN function for the key type, or by VIN from the dealer.
  3. Start Smart key learning and accept the warning that all fobs will be erased.
  4. Ignition OFF, then enter the PIN when the tool asks.
  5. Press OK, then within 5 seconds press the start button with the first fob until the tool confirms (cars with a fob slot or holder: put the fob in it).
  6. Repeat for every fob, the old ones included; stop after the last one.
  7. Check that each fob locks, unlocks and starts the car.
Watch out: Smart key learning erases every fob first: all fobs the customer keeps must be learned again in the same session. A fob that was learned to another car cannot be learned again (Hyundai: permanently tied to the first VIN). Use a new fob with the right chip and frequency. Three wrong PIN entries lock key teaching for one hour; disconnecting the battery does not shorten the wait. Most of these cars take 2 fobs; some accept a 3rd (the tool asks after the 2nd fob).
All keys lost - Autel MaxiIM IM608

Needs: two new, never-learned smart keys with the right chip and frequency, PIN by VIN from the dealer, emergency blade cut to the door lock

  1. Open the car with the emergency blade cut to the door lock.
  2. Connect the IM608 by OBD and enter the VIN by hand (auto VIN can fail with no fob in the car).
  3. Get the PIN by VIN from the dealer.
  4. Start Smart key learning and accept the erase warning.
  5. Ignition OFF, then enter the PIN when the tool asks.
  6. Press OK, then within 5 seconds press the start button with the first new fob until the tool confirms.
  7. Repeat for the second fob, then test lock, unlock and start with each.
Watch out: Three wrong PIN entries lock key teaching for one hour; disconnecting the battery does not shorten the wait. A fob that was learned to another car cannot be learned again (Hyundai: permanently tied to the first VIN). Use a new fob with the right chip and frequency. Lost fobs are erased by the learning. Most of these cars take 2 fobs; some accept a 3rd (the tool asks after the 2nd fob).
All keys lost - Lonsdor K518(US / Canada cars)

Needs: two new, never-learned smart keys with the right chip and frequency, PIN by VIN from the dealer, emergency blade cut to the door lock

  1. Open the car with the emergency blade cut to the door lock.
  2. Connect the K518 by OBD and enter the VIN by hand (auto VIN can fail with no fob in the car).
  3. Get the PIN by VIN from the dealer.
  4. Start Smart key learning and accept the erase warning.
  5. Ignition OFF, then enter the PIN when the tool asks.
  6. Press OK, then within 5 seconds press the start button with the first new fob until the tool confirms.
  7. Repeat for the second fob, then test lock, unlock and start with each.
Watch out: Three wrong PIN entries lock key teaching for one hour; disconnecting the battery does not shorten the wait. A fob that was learned to another car cannot be learned again (Hyundai: permanently tied to the first VIN). Use a new fob with the right chip and frequency. Lost fobs are erased by the learning. Most of these cars take 2 fobs; some accept a 3rd (the tool asks after the 2nd fob).

When the key changed

Smart key (push to start)

  • from 2021This yearChip: 4A433 MHzFCC: CQOFD00790, CQOFD01340CV; the NFC card key is a separate registration.

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the Kia EV6 2022?

6 listings fit the Kia EV6 2022: smart keys, remote keys, emergency blades and key blanks, in 3-, 4-, 6- and 7-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.

What frequency does the Kia EV6 2022 remote use?

Every remote listed for the Kia EV6 2022 transmits on 433 MHz.

Which transponder chip does the Kia EV6 2022 key use?

The listings for this car carry: 4A (HITAG AES) · ID46 / ID47 / ID4A (writable). Check the chip in each listing's specifications.

Which FCC IDs do Kia EV6 2022 remotes carry?

The remotes listed for this car carry FCC ID CQ0FD00790, CQ0FD01340, CQ0FN01050, FG00800, FG01350, SY5MQ4FGE04, SY5SKFGE04 and TQ8F0B4F24. Match it with the FCC ID printed on your original remote.

Which blade profile does the Kia EV6 2022 key use?

The blades listed for this car: KK12.

Which tools program a Kia EV6 2022 key?

The tool makers' coverage lists name Autel IM608 II / IM608 Pro II, Lonsdor K518, OBDSTAR Key Master G3, Advanced Diagnostics Smart Pro and Launch X-431 IMMO for this car; 2 of them list all keys lost. Check your tool's latest coverage list before the job.