Kia Forte 2017 Key Fob & Car Keys
Keys that fit the 2017 Kia Forte: smart keys, flip keys and remote keys, 2, 3 or 4 buttons, FCC ID FG00050, 0SL0KA870T or 0SL0KA875T, 8A (H-chip) chip, 433 MHz. 14 compatible keys, remotes & shells (genuine and aftermarket) available for the 2017 Kia Forte.
Last updated: 12 November 2026
Key specifications for the Kia Forte 2017
- Key types
- smart keys, flip keys, remote keys, key shells, emergency blades and key blanks
- Frequency
- 433 MHz
- Buttons
- 2-, 3- and 4-button
- Transponder chip
- 8A (H-chip)
- Blade profile
- HYN14R · KIA7 · TOY48 · HY14R
- Part numbers
- 95430-A7100 · 95430-A7200 · 81996-A7020 · 95440-A7600 · 95430-2T560 · 95440-A7700
- Battery
- CR2032
To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Kia parts catalogue, with the specifications on each listing. Every remote listed for the Kia Forte 2017 transmits on 433 MHz.
A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.
- $0.49In Stock
- $3.10In Stock
- $28.09In Stock
- $23.88In Stock
- $1.40In Stock
- $1.97In Stock
- $112.67Out of Stock
- $55.81Out of Stock
Programming the Kia Forte 2017 key
Smart key (push to start)
6 tools list this key. 5 of them list all keys lost.
- OBDSTAR Key Master G3
- Add key
- All keys lost(non-US cars)
- Remote
reads the PIN by OBD - Add key
- All keys lost
- Add key
- All keys lost
PIN read function- XTOOL X100 PAD3 / X100 MAX
- Add key
- All keys lost
reads the PIN by OBD - Advanced Diagnostics Smart Pro
- All keys lost
- Remote
PIN read functionNeeds: AD ADC2000 cable - Launch X-431 IMMO
- Add key
All keys lost is listed by OBDSTAR Key Master G3, Autel IM608 II / IM608 Pro II, Lonsdor K518, XTOOL X100 PAD3 / X100 MAX and Advanced Diagnostics Smart Pro. Launch X-431 IMMO lists add key only.
Programming steps
Add key - Autel MaxiIM IM608
Needs: every fob the customer keeps (all are erased and learned again), new, never-learned smart key with the right chip and frequency, 6-digit PIN: tool read (by OBD on 8A cars; with a working fob on 46 / 47 / 4A cars where Autel lists it) or by VIN from the dealer
- Connect the IM608 by OBD, identify the car by VIN and open the Smart key (SMK) system; check SMK status and the current fob first.
- Read the PIN with the tool's function for the key type, or get it by VIN from the dealer.
- Start Smart key learning and accept the warning that all fobs will be erased.
- Ignition OFF (cluster dark), open and close the driver's door, then enter the PIN.
- Press OK, then within 5 seconds press and hold the start button with the back / top of the first fob for about 5 seconds until the immobilizer lamp flashes (cars with a fob slot: put the fob in the slot).
- Repeat for every fob, the old ones included; cancel when the last one is done.
- Check that each fob locks, unlocks and starts the car; read the key count.
Add key - Lonsdor K518
Needs: every fob the customer keeps (all are erased and learned again), new, never-learned smart key with the right chip and frequency, 6-digit PIN: tool PIN read where the tool list offers it for this car and chip, otherwise by VIN from the dealer
- Connect the K518 by OBD, identify the car (VIN, or model and year) and open the Smart key system.
- Get the PIN: the tool's PIN function for the key type, or by VIN from the dealer.
- Start Smart key learning and accept the warning that all fobs will be erased.
- Ignition OFF, then enter the PIN when the tool asks.
- Press OK, then within 5 seconds press the start button with the first fob until the tool confirms (cars with a fob slot or holder: put the fob in it).
- Repeat for every fob, the old ones included; stop after the last one.
- Check that each fob locks, unlocks and starts the car.
All keys lost - Advanced Diagnostics Smart Pro
Needs: ADS2280 or ADS2321 software, ADC2000 cable, new keys (blade: cut to the lock), internet only for ADS2331 PIN reading
- Connect the Smart Pro by OBD with the ADC2000 cable and choose the car in the Hyundai-Kia software.
- Let the software read the PIN (no working key needed on the listed cars); if it reports PIN read not supported, get the PIN from the dealer.
- Accept the erase of all keys and remotes.
- Smart: press the start button with each new fob as prompted (transponder and remote are learned together).
- Test start and lock / unlock with every key.
All keys lost - Advanced Diagnostics Smart Pro
Needs: ADS2280 or ADS2321 software, ADC2000 cable, new keys (blade: cut to the lock), internet only for ADS2331 PIN reading
- Connect the Smart Pro by OBD with the ADC2000 cable and choose the car in the Hyundai-Kia software.
- Let the software read the PIN (no working key needed on the listed cars); if it reports PIN read not supported, get the PIN from the dealer.
- Accept the erase of all keys and remotes.
- Smart: press the start button with each new fob as prompted (transponder and remote are learned together).
- Test start and lock / unlock with every key.
All keys lost - Autel MaxiIM IM608
Needs: two new, never-learned smart keys with the right chip and frequency, PIN by VIN from the dealer (no Autel all-keys-lost PIN read found for this car's chip), emergency blade cut to the door lock
- Open the car with the emergency blade cut to the door lock.
- Connect the IM608 by OBD and identify the car (enter the VIN by hand if auto VIN fails with no fob present).
- Get the PIN by VIN from the dealer.
- Start Smart key learning and accept the erase warning.
- Ignition OFF, open and close the driver's door, enter the PIN.
- Press OK, then within 5 seconds hold the back / top of the first new fob on the start button for about 5 seconds until the immobilizer lamp flashes.
- Repeat for the second fob, then test lock, unlock and start with each.
All keys lost - Lonsdor K518
Needs: two new, never-learned smart keys with the right chip and frequency, PIN by VIN from the dealer, emergency blade cut to the door lock
- Open the car with the emergency blade cut to the door lock.
- Connect the K518 by OBD and enter the VIN by hand (auto VIN can fail with no fob in the car).
- Get the PIN by VIN from the dealer.
- Start Smart key learning and accept the erase warning.
- Ignition OFF, then enter the PIN when the tool asks.
- Press OK, then within 5 seconds press the start button with the first new fob until the tool confirms.
- Repeat for the second fob, then test lock, unlock and start with each.
Key with a blade (regular or flip)
7 tools list this key. 5 of them list all keys lost.
- Add key
- All keys lost(non-US cars)
- Remote
PIN read function- OBDSTAR Key Master G3
- Add key
- All keys lost(non-US cars)
- Remote
reads the PIN by OBD - XTOOL X100 PAD3 / X100 MAX
- Add key
- All keys lost
- Remote
reads the PIN by OBD - Add key
- All keys lost
- Advanced Diagnostics Smart Pro
- All keys lost
- Remote
PIN read functionNeeds: AD ADC2000 cable, AD Smart Aerial - Universal key
- Universal key
Programming steps
Add key - Autel MaxiIM IM608
Needs: every key the customer keeps (all are taught again), new transponder key or flip remote cut to the lock, 6-digit PIN: read by OBD on 46-chip SMARTRA cars, read from a working key on 80-bit (4D / DST80) cars where Autel lists it (XP400 + APB131), otherwise by VIN from the dealer, battery support (stable 12 V)
- Check the cluster shows an immobilizer lamp at ignition ON (US turn-key cars without one: use the US no-immobilizer case).
- Connect the IM608 by OBD, identify the car by VIN and open the Immobilizer system.
- Read the PIN with the tool's PIN function for the chip type; if the car is not listed, get the PIN by VIN from the dealer.
- Start Key learning, switch the ignition ON with the first key and enter the PIN.
- Teach the first key; when asked, switch off, insert the next key and switch ON within about 10 seconds. Repeat for every key, the working ones included.
- Finish, leave the ignition off for about 10 seconds, then start the engine with each key.
- Learn the remote buttons with Transmitter code saving (ignition off, key out, press LOCK on each remote when prompted).
Add key - Autel MaxiIM IM608 (Transmitter code saving)(US / Canada cars)
Needs: working key to copy, remote (flip key or separate fob) for the car, every remote the customer keeps
- Confirm the car has no immobilizer: turn-key ignition, no start button and no immobilizer lamp in the cluster (the dealer can confirm by VIN).
- Duplicate the working key; with no immobilizer it starts the engine without programming.
- Connect the tool by OBD and open Transmitter code saving (remote keyless entry).
- Ignition OFF and key out when asked, then press LOCK on the first remote about 2 seconds after confirming.
- Repeat for each remote to keep (up to 4), then test lock and unlock.
- If the car has the dealer anti-theft logic upgrade, check it starts after locking and unlocking with the new remote.
Add key - Autel MaxiIM IM608 (Transmitter code saving)(US / Canada cars)
Needs: working key to copy, remote (flip key or separate fob) for the car, every remote the customer keeps
- Confirm the car has no immobilizer: turn-key ignition, no start button and no immobilizer lamp in the cluster (the dealer can confirm by VIN).
- Duplicate the working key; with no immobilizer it starts the engine without programming.
- Connect the tool by OBD and open Transmitter code saving (remote keyless entry).
- Ignition OFF and key out when asked, then press LOCK on the first remote about 2 seconds after confirming.
- Repeat for each remote to keep (up to 4), then test lock and unlock.
- If the car has the dealer anti-theft logic upgrade, check it starts after locking and unlocking with the new remote.
Add key - Lonsdor K518(GCC / Europe cars)
Needs: every key the customer keeps (all are taught again), new transponder key or flip remote with the right chip, cut to the lock, 6-digit PIN: tool PIN read where the tool list offers it for this car and chip, otherwise by VIN from the dealer, battery support (stable 12 V)
- Check the cluster shows an immobilizer lamp at ignition ON (US turn-key cars without one: use the US no-immobilizer case).
- Connect the K518 by OBD, choose the car and open the immobilizer key programming menu.
- Get the PIN: tool PIN read where offered, otherwise by VIN from the dealer.
- Start Key learning, switch the ignition ON with the first key and enter the PIN.
- Teach the first key; when asked, switch off, insert the next key and switch ON within about 10 seconds. Repeat for every key, the working ones included.
- Leave the ignition off for about 10 seconds, then start with each key.
- Learn the remotes with Transmitter code saving.
All keys lost - Advanced Diagnostics Smart Pro
Needs: ADS2280 or ADS2321 software, ADC2000 cable, new keys (blade: cut to the lock), internet only for ADS2331 PIN reading
- Connect the Smart Pro by OBD with the ADC2000 cable and choose the car in the Hyundai-Kia software.
- Let the software read the PIN (no working key needed on the listed cars); if it reports PIN read not supported, get the PIN from the dealer.
- Accept the erase of all keys and remotes.
- Blade: switch ON with each new key in turn as prompted; then program the remotes in their own step.
- Test start and lock / unlock with every key.
All keys lost - Autel MaxiIM IM608
Needs: two new transponder keys or flip remotes cut to the lock (by key code or decoding), 6-digit PIN: read by OBD on 46-chip SMARTRA cars; by VIN from the dealer on 80-bit (4D / DST80) cars, whose PIN read needs a working key, battery support (stable 12 V)
- Cut a new key to the door / ignition lock so the ignition can be switched ON.
- Connect the IM608 by OBD, identify the car by VIN and open the Immobilizer system.
- Get the PIN: tool PIN read by OBD on 46-chip SMARTRA cars, otherwise by VIN from the dealer.
- Start Key learning, switch ON with the first new key and enter the PIN.
- Teach each new key in turn (switch off, next key, ON within about 10 seconds).
- Leave the ignition off for about 10 seconds, then start with each key.
- Learn the remotes with Transmitter code saving.
All keys lost - Autel MaxiIM IM608 (Transmitter code saving)(US / Canada cars)
Needs: key code or lock decoding, remote (flip key or separate fob) for the car, every remote the customer keeps
- Confirm the car has no immobilizer: turn-key ignition, no start button and no immobilizer lamp in the cluster (the dealer can confirm by VIN).
- Cut the new key by key code or by decoding the lock; with no immobilizer it starts the engine without programming.
- Connect the tool by OBD and open Transmitter code saving (remote keyless entry).
- Ignition OFF and key out when asked, then press LOCK on the first remote about 2 seconds after confirming.
- Repeat for each remote to keep (up to 4), then test lock and unlock.
- If the car has the dealer anti-theft logic upgrade, check it starts after locking and unlocking with the new remote.
All keys lost - Autel MaxiIM IM608 (Transmitter code saving)(US / Canada cars)
Needs: key code or lock decoding, remote (flip key or separate fob) for the car, every remote the customer keeps
- Confirm the car has no immobilizer: turn-key ignition, no start button and no immobilizer lamp in the cluster (the dealer can confirm by VIN).
- Cut the new key by key code or by decoding the lock; with no immobilizer it starts the engine without programming.
- Connect the tool by OBD and open Transmitter code saving (remote keyless entry).
- Ignition OFF and key out when asked, then press LOCK on the first remote about 2 seconds after confirming.
- Repeat for each remote to keep (up to 4), then test lock and unlock.
- If the car has the dealer anti-theft logic upgrade, check it starts after locking and unlocking with the new remote.
All keys lost - Lonsdor K518(GCC / Europe cars)
Needs: two new transponder keys or flip remotes cut to the lock (by key code or decoding), 6-digit PIN: tool PIN read where the tool list offers it for this car and chip, otherwise by VIN from the dealer, battery support (stable 12 V)
- Cut a new key to the door / ignition lock so the ignition can be switched ON.
- Connect the K518 by OBD, choose the car and open the immobilizer key programming menu.
- Get the PIN: tool PIN read where offered, otherwise by VIN from the dealer.
- Start Key learning, switch the ignition ON with the first key and enter the PIN.
- Teach each new key in turn (switch off, next key, ON within about 10 seconds).
- Leave the ignition off for about 10 seconds, then start with each key.
- Learn the remotes with Transmitter code saving.
Without a tool
The remote is not programmed on the car by hand: it needs a tool or a dealer.
When the key changed
Smart key (push to start)
- 2010 - 2013Chip: ID46FCC: SY5HMFNA04US fobs 315 MHz
- 2014 - 2018This yearChip: 8AUS fobs 315 MHz to 2016, 433 MHz after
- 2019 - 2021Chip: 8A433 MHzFCC: CQOFD00430
- from 2022Chip: 4A433 MHzFCC: CQOFD00790Some 2022-2023 cars keep the 8A fob 95440-M7000
Key with a blade (regular or flip)
- 2009 - 2013Chip: ID46(GCC / Europe cars)Sold as Cerato in the GCC
- 2014 - 2018This yearChip: DST80433 MHz(GCC / Europe cars)Flip key chip sold as 4D60 80-bit; US flips have no chip
- from 2019Chip: 8A433 MHz(GCC / Europe cars)
- from 2022Chip: 8AFCC: CQOTD00660(US / Canada cars)Earlier US flips 95430-M6000 / M6400 have no chip
Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.
Frequently asked questions
Which keys fit the Kia Forte 2017?
14 listings fit the Kia Forte 2017: smart keys, flip keys, remote keys, key shells, emergency blades and key blanks, in 2-, 3- and 4-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.
What frequency does the Kia Forte 2017 remote use?
Every remote listed for the Kia Forte 2017 transmits on 433 MHz.
Which transponder chip does the Kia Forte 2017 key use?
The listings for this car carry: 8A (H-chip). Check the chip in each listing's specifications.
Which FCC IDs do Kia Forte 2017 remotes carry?
The remotes listed for this car carry FCC ID 0SL0KA870T, 0SL0KA875T, CQ0FN00100, FG00050, NY0DD4TX1306TFL, NY0SYEC4TX1611 and SY5JFRGE04. Match it with the FCC ID printed on your original remote.
Which blade profile does the Kia Forte 2017 key use?
The blades listed for this car: HYN14R · KIA7 · TOY48 · HY14R.
Which tools program a Kia Forte 2017 key?
The tool makers' coverage lists name OBDSTAR Key Master G3, Autel IM608 II / IM608 Pro II, Lonsdor K518, XTOOL X100 PAD3 / X100 MAX, Advanced Diagnostics Smart Pro and Launch X-431 IMMO for this car; 5 of them list all keys lost. Check your tool's latest coverage list before the job.
Can the Kia Forte 2017 remote be programmed without a tool?
The remote is not programmed on the car by hand: it needs a tool or a dealer.













