Kia Morning 2012 Key Fob & Car Keys
Keys that fit the 2011–2013 Kia Morning: smart keys and flip keys, 2 or 3 buttons, 4D-60 (80-bit) or ID46 (HITAG 2) chip, 433 MHz. 5 compatible keys, remotes & shells (genuine and aftermarket) available for the 2012 Kia Morning.
Last updated: 18 November 2026
Key specifications for the Kia Morning 2011–2013
- Key types
- smart keys, flip keys, key shells, emergency blades and key blanks
- Frequency
- 433 MHz
- Buttons
- 2- and 3-button
- Transponder chip
- 4D-60 (80-bit) · ID46 (HITAG 2)
- Blade profile
- HYN17
- Part numbers
- 81996-1Y620 · 95440-1Y500
- Battery
- CR2032
To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Kia parts catalogue, with the specifications on each listing. Every remote listed for the Kia Morning 2011–2013 transmits on 433 MHz.
A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.
- $1.40In Stock
- $3.59In Stock
- $63.04Out of Stock
Programming the Kia Morning 2012 key
Smart key (push to start)
3 tools list this key. 2 of them list all keys lost.
- OBDSTAR Key Master G3
- Add key
- All keys lost
- Remote
reads the PIN by OBD - Add key(non-US cars)
- All keys lost(non-US cars)
- Universal key
Programming steps
Add key - Autel MaxiIM IM608(GCC / Europe cars)
Needs: every fob the customer keeps (all are erased and learned again), new, never-learned smart key with the right chip and frequency, 6-digit PIN: tool PIN read where the tool list offers it for this car and chip, otherwise by VIN from the dealer
- Connect the IM608 by OBD, identify the car (VIN, or model and year) and open the Smart key system.
- Get the PIN: the tool's PIN function for the key type, or by VIN from the dealer.
- Start Smart key learning and accept the warning that all fobs will be erased.
- Ignition OFF, then enter the PIN when the tool asks.
- Press OK, then within 5 seconds press the start button with the first fob until the tool confirms (cars with a fob slot or holder: put the fob in it).
- Repeat for every fob, the old ones included; stop after the last one.
- Check that each fob locks, unlocks and starts the car.
All keys lost - Autel MaxiIM IM608(GCC / Europe cars)
Needs: two new, never-learned smart keys with the right chip and frequency, PIN by VIN from the dealer, emergency blade cut to the door lock
- Open the car with the emergency blade cut to the door lock.
- Connect the IM608 by OBD and enter the VIN by hand (auto VIN can fail with no fob in the car).
- Get the PIN by VIN from the dealer.
- Start Smart key learning and accept the erase warning.
- Ignition OFF, then enter the PIN when the tool asks.
- Press OK, then within 5 seconds press the start button with the first new fob until the tool confirms.
- Repeat for the second fob, then test lock, unlock and start with each.
Key with a blade (regular or flip)
2 tools list this key. 2 of them list all keys lost.
- OBDSTAR Key Master G3
- Add key
- All keys lost
- Remote
reads the PIN by OBD - Add key(non-US cars)
- All keys lost(non-US cars)
Programming steps
Add key - Autel MaxiIM IM608(GCC / Europe cars)
Needs: every key the customer keeps (all are taught again), new transponder key or flip remote cut to the lock, 6-digit PIN: read by OBD on 46-chip SMARTRA cars, read from a working key on 80-bit (4D / DST80) cars where Autel lists it (XP400 + APB131), otherwise by VIN from the dealer, battery support (stable 12 V)
- Check the cluster shows an immobilizer lamp at ignition ON (US turn-key cars without one: use the US no-immobilizer case).
- Connect the IM608 by OBD, identify the car by VIN and open the Immobilizer system.
- Read the PIN with the tool's PIN function for the chip type; if the car is not listed, get the PIN by VIN from the dealer.
- Start Key learning, switch the ignition ON with the first key and enter the PIN.
- Teach the first key; when asked, switch off, insert the next key and switch ON within about 10 seconds. Repeat for every key, the working ones included.
- Finish, leave the ignition off for about 10 seconds, then start the engine with each key.
- Learn the remote buttons with Transmitter code saving (ignition off, key out, press LOCK on each remote when prompted).
All keys lost - Autel MaxiIM IM608(GCC / Europe cars)
Needs: two new transponder keys or flip remotes cut to the lock (by key code or decoding), 6-digit PIN: read by OBD on 46-chip SMARTRA cars; by VIN from the dealer on 80-bit (4D / DST80) cars, whose PIN read needs a working key, battery support (stable 12 V)
- Cut a new key to the door / ignition lock so the ignition can be switched ON.
- Connect the IM608 by OBD, identify the car by VIN and open the Immobilizer system.
- Get the PIN: tool PIN read by OBD on 46-chip SMARTRA cars, otherwise by VIN from the dealer.
- Start Key learning, switch ON with the first new key and enter the PIN.
- Teach each new key in turn (switch off, next key, ON within about 10 seconds).
- Leave the ignition off for about 10 seconds, then start with each key.
- Learn the remotes with Transmitter code saving.
When the key changed
Smart key (push to start)
- 2011 - 2017This yearChip: ID46433 MHz(GCC / Europe cars)Second generation (TA); push-start trims only.
- 2017 - 2019Chip: 8A433 MHzFCC: SYEC3FOB1611(GCC / Europe cars)Third generation (JA); push-start trims only.
Key with a blade (regular or flip)
- 2006 - 2011Chip: ID46(GCC / Europe cars)First generation (SA), sold as Picanto outside Korea.
- 2011 - 2017This yearChip: DST80433 MHz(GCC / Europe cars)Flip key chip sold as 4D60 80-bit
- 2017 - 2019Chip: DST80433 MHz(GCC / Europe cars)Flip key chip sold as 4D60 80-bit
Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.
Frequently asked questions
Which keys fit the Kia Morning 2011–2013?
5 listings fit the Kia Morning 2011–2013: smart keys, flip keys, key shells, emergency blades and key blanks, in 2- and 3-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.
What frequency does the Kia Morning 2011–2013 remote use?
Every remote listed for the Kia Morning 2011–2013 transmits on 433 MHz.
Which transponder chip does the Kia Morning 2011–2013 key use?
The listings for this car carry: 4D-60 (80-bit) · ID46 (HITAG 2). Check the chip in each listing's specifications.
Which blade profile does the Kia Morning 2011–2013 key use?
The blades listed for this car: HYN17.
Which tools program a Kia Morning 2011–2013 key?
The tool makers' coverage lists name OBDSTAR Key Master G3, Autel IM608 II / IM608 Pro II and Autel KM100 (IKEY universal smart key) for this car; 2 of them list all keys lost. Check your tool's latest coverage list before the job.




