Skip to content

Kia Opirus 2008–2009 Key Fob & Car Keys

Keys that fit the 2008–2009 Kia Opirus: smart keys, 3 buttons, 4D-60 chip, 433 MHz. 1 compatible key, remote & shell (genuine and aftermarket) available for the 2008 Kia Opirus.

Last updated: 10 November 2026

Key specifications for the Kia Opirus 2008–2009

Key types
smart keys
Frequency
433 MHz
Buttons
3-button
Transponder chip
4D-60
Part numbers
95440-3F700

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Kia parts catalogue, with the specifications on each listing. Every remote listed for the Kia Opirus 2008–2009 transmits on 433 MHz.

A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.

Programming the Kia Opirus 2008 key

Smart key (push to start)

3 tools list this key. None of the lists names all keys lost for this year.

Key with a blade (regular or flip)

3 tools list this key. 3 of them list all keys lost.

    • Add key
    • All keys lost(non-US cars)
    • Remote
    PIN read function
  • OBDSTAR Key Master G3
    • Add key
    • All keys lost
    • Remote
    reads the PIN by OBD
  • XTOOL X100 PAD3 / X100 MAX
    • Add key
    • All keys lost
    • Remote
    reads the PIN by OBD

Programming steps

Add key - Lonsdor K518 (46-chip PIN read by OBD)(GCC / Europe cars)

Needs: new 46-chip key(s) cut to the lock, every key the customer keeps

  1. Connect the K518 by OBD.
  2. Read PIN code (46 chip) by OBD with the ignition ON (a cut, unprogrammed key turns the lock).
  3. Open the Immobilizer key programming menu for the car, switch ON with the first key and enter the PIN.
  4. Program the first key, then switch off, insert the next key, switch ON and program it; repeat for every key to keep.
  5. Leave the ignition off for about 10 seconds and start with each key.
  6. Program the remotes in the Remote control system menu (ignition ON then OFF, key out, press a button on each remote when asked; up to 4).
Watch out: Key teaching rebuilds the key list: a key not presented in the same session stops starting the car. Bring every key the customer keeps. Three wrong PIN entries lock key teaching for one hour; disconnecting the battery does not shorten the wait. The transponder and the remote buttons are learned separately on blade / flip keys: a key that starts the car may still not lock or unlock until Transmitter code saving is done.
All keys lost - Lonsdor K518 (46-chip PIN read by OBD)(GCC / Europe cars)

Needs: new 46-chip key(s) cut to the lock, at least two new keys

  1. Connect the K518 by OBD.
  2. Read PIN code (46 chip) by OBD with the ignition ON (a cut, unprogrammed key turns the lock).
  3. Open the Immobilizer key programming menu for the car, switch ON with the first key and enter the PIN.
  4. Program the first key, then switch off, insert the next key, switch ON and program it; repeat for every key to keep.
  5. Leave the ignition off for about 10 seconds and start with each key.
  6. Program the remotes in the Remote control system menu (ignition ON then OFF, key out, press a button on each remote when asked; up to 4).
Watch out: Lost keys stop starting the car once the new set is taught. Three wrong PIN entries lock key teaching for one hour; disconnecting the battery does not shorten the wait. The transponder and the remote buttons are learned separately on blade / flip keys: a key that starts the car may still not lock or unlock until Transmitter code saving is done.

Key type not stated by the list

One tool lists this key.

  • Launch X-431 IMMO
    • Add key
    PIN read function

When the key changed

Key with a blade (regular or flip)

  • 2007 - 2010This yearChip: ID46(GCC / Europe cars)GH facelift (Amanti in the US); key-start cars.

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the Kia Opirus 2008–2009?

1 listing fit the Kia Opirus 2008–2009: smart keys, in 3-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.

What frequency does the Kia Opirus 2008–2009 remote use?

Every remote listed for the Kia Opirus 2008–2009 transmits on 433 MHz.

Which transponder chip does the Kia Opirus 2008–2009 key use?

The listings for this car carry: 4D-60. Check the chip in each listing's specifications.

Which tools program a Kia Opirus 2008–2009 key?

The tool makers' coverage lists name OBDSTAR Key Master G3, Lonsdor K518, Autel KM100 (IKEY universal smart key), XTOOL X100 PAD3 / X100 MAX and Launch X-431 IMMO for this car; 3 of them list all keys lost. Check your tool's latest coverage list before the job.