Kia Picanto 2015 Key Fob & Car Keys
Keys that fit the 2015 Kia Picanto: smart keys, flip keys and remote keys, 2 or 3 buttons, FCC ID DD2TX1307TA, 4D-60 (80-bit) or ID46 (HITAG 2) chip, 433 MHz. 15 compatible keys, remotes & shells (genuine and aftermarket) available for the 2015 Kia Picanto.
Last updated: 10 November 2026
Key specifications for the Kia Picanto 2015
- Key types
- smart keys, flip keys, remote keys, transponder keys, key shells, emergency blades and key blanks
- Frequency
- 433 MHz
- Buttons
- 2- and 3-button
- Transponder chip
- 4D-60 (80-bit) · ID46 (HITAG 2)
- Blade profile
- HYN17 · KIA7
- Part numbers
- 81926-2L000 · 81996-2V101 · 95430-1Y600 · 81996-1Y620 · 95440-1Y600 · 95440-1Y500
- Battery
- CR2032
- Compatible FCC IDs
To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Kia parts catalogue, with the specifications on each listing. Every remote listed for the Kia Picanto 2015 transmits on 433 MHz.
A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.
- $0.84In Stock
- $0.42In Stock
- $3.37In Stock
- Kia Picanto 2013-2017 Flip Remote Key 2-Button 433MHz - 95430-1Y600 - Genuine · OEM · Used
SKU: B01516
$16.85In Stock - $1.40In Stock
- $3.59In Stock
- $84.75Out of Stock
- $63.04Out of Stock
Programming the Kia Picanto 2015 key
Smart key (push to start)
7 tools list this key. 3 of them list all keys lost.
- Add key(non-US cars)
- All keys lost(non-US cars)
- XTOOL X100 PAD3 / X100 MAX
- Add key
- All keys lost
reads the PIN by OBD - Advanced Diagnostics Smart Pro
- All keys lost
- Remote
PIN read functionNeeds: AD ADC2000 cable - OBDSTAR Key Master G3
- Add key
- Remote
reads the PIN by OBD - Launch X-431 IMMO
- Add key
- Add key
PIN read function- Universal key
All keys lost is listed by Autel IM608 II / IM608 Pro II, XTOOL X100 PAD3 / X100 MAX and Advanced Diagnostics Smart Pro. OBDSTAR Key Master G3, Launch X-431 IMMO and Lonsdor K518 list add key only.
Programming steps
Add key - Autel MaxiIM IM608(GCC / Europe cars)
Needs: every fob the customer keeps (all are erased and learned again), new, never-learned smart key with the right chip and frequency, 6-digit PIN: tool read (by OBD on 8A cars; with a working fob on 46 / 47 / 4A cars where Autel lists it) or by VIN from the dealer
- Connect the IM608 by OBD, identify the car by VIN and open the Smart key (SMK) system; check SMK status and the current fob first.
- Read the PIN with the tool's function for the key type, or get it by VIN from the dealer.
- Start Smart key learning and accept the warning that all fobs will be erased.
- Ignition OFF (cluster dark), open and close the driver's door, then enter the PIN.
- Press OK, then within 5 seconds press and hold the start button with the back / top of the first fob for about 5 seconds until the immobilizer lamp flashes (cars with a fob slot: put the fob in the slot).
- Repeat for every fob, the old ones included; cancel when the last one is done.
- Check that each fob locks, unlocks and starts the car; read the key count.
All keys lost - Advanced Diagnostics Smart Pro(GCC / Europe cars)
Needs: ADS2280 or ADS2321 software, ADC2000 cable, new keys (blade: cut to the lock), internet only for ADS2331 PIN reading
- Connect the Smart Pro by OBD with the ADC2000 cable and choose the car in the Hyundai-Kia software.
- Let the software read the PIN (no working key needed on the listed cars); if it reports PIN read not supported, get the PIN from the dealer.
- Accept the erase of all keys and remotes.
- Smart: press the start button with each new fob as prompted (transponder and remote are learned together).
- Test start and lock / unlock with every key.
All keys lost - Autel MaxiIM IM608(GCC / Europe cars)
Needs: two new, never-learned smart keys with the right chip and frequency, PIN by VIN from the dealer (no Autel all-keys-lost PIN read found for this car's chip), emergency blade cut to the door lock
- Open the car with the emergency blade cut to the door lock.
- Connect the IM608 by OBD and identify the car (enter the VIN by hand if auto VIN fails with no fob present).
- Get the PIN by VIN from the dealer.
- Start Smart key learning and accept the erase warning.
- Ignition OFF, open and close the driver's door, enter the PIN.
- Press OK, then within 5 seconds hold the back / top of the first new fob on the start button for about 5 seconds until the immobilizer lamp flashes.
- Repeat for the second fob, then test lock, unlock and start with each.
Key with a blade (regular or flip)
5 tools list this key. 4 of them list all keys lost.
- Advanced Diagnostics Smart Pro
- Add key
- All keys lost
- Remote
PIN read functionNeeds: AD ADC2000 cable - OBDSTAR Key Master G3
- Add key
- All keys lost
- Remote
reads the PIN by OBD - XTOOL X100 PAD3 / X100 MAX
- Add key
- All keys lost
- Remote
reads the PIN by OBD - Add key(non-US cars)
- All keys lost(non-US cars)
- Add key
- Remote
PIN read function
All keys lost is listed by Advanced Diagnostics Smart Pro, OBDSTAR Key Master G3, XTOOL X100 PAD3 / X100 MAX and Autel IM608 II / IM608 Pro II. Lonsdor K518 lists add key only.
Programming steps
Add key - Autel MaxiIM IM608(GCC / Europe cars)
Needs: every key the customer keeps (all are taught again), new transponder key or flip remote cut to the lock, 6-digit PIN: read by OBD on 46-chip SMARTRA cars, read from a working key on 80-bit (4D / DST80) cars where Autel lists it (XP400 + APB131), otherwise by VIN from the dealer, battery support (stable 12 V)
- Check the cluster shows an immobilizer lamp at ignition ON (US turn-key cars without one: use the US no-immobilizer case).
- Connect the IM608 by OBD, identify the car by VIN and open the Immobilizer system.
- Read the PIN with the tool's PIN function for the chip type; if the car is not listed, get the PIN by VIN from the dealer.
- Start Key learning, switch the ignition ON with the first key and enter the PIN.
- Teach the first key; when asked, switch off, insert the next key and switch ON within about 10 seconds. Repeat for every key, the working ones included.
- Finish, leave the ignition off for about 10 seconds, then start the engine with each key.
- Learn the remote buttons with Transmitter code saving (ignition off, key out, press LOCK on each remote when prompted).
All keys lost - Advanced Diagnostics Smart Pro(GCC / Europe cars)
Needs: ADS2280 or ADS2321 software, ADC2000 cable, new keys (blade: cut to the lock), internet only for ADS2331 PIN reading
- Connect the Smart Pro by OBD with the ADC2000 cable and choose the car in the Hyundai-Kia software.
- Let the software read the PIN (no working key needed on the listed cars); if it reports PIN read not supported, get the PIN from the dealer.
- Accept the erase of all keys and remotes.
- Blade: switch ON with each new key in turn as prompted; then program the remotes in their own step.
- Test start and lock / unlock with every key.
All keys lost - Autel MaxiIM IM608(GCC / Europe cars)
Needs: two new transponder keys or flip remotes cut to the lock (by key code or decoding), 6-digit PIN: read by OBD on 46-chip SMARTRA cars; by VIN from the dealer on 80-bit (4D / DST80) cars, whose PIN read needs a working key, battery support (stable 12 V)
- Cut a new key to the door / ignition lock so the ignition can be switched ON.
- Connect the IM608 by OBD, identify the car by VIN and open the Immobilizer system.
- Get the PIN: tool PIN read by OBD on 46-chip SMARTRA cars, otherwise by VIN from the dealer.
- Start Key learning, switch ON with the first new key and enter the PIN.
- Teach each new key in turn (switch off, next key, ON within about 10 seconds).
- Leave the ignition off for about 10 seconds, then start with each key.
- Learn the remotes with Transmitter code saving.
When the key changed
Smart key (push to start)
- 2011 - 2017This yearChip: ID46433 MHz(GCC / Europe cars)
- 2017 - 2022Chip: 8A(GCC / Europe cars)
Key with a blade (regular or flip)
- 2004 - 2011Chip: ID46(GCC / Europe cars)
- 2011 - 2017This yearChip: DST80(GCC / Europe cars)Flip key chip sold as 4D60 80-bit
- 2017 - 2023Chip: DST80433 MHz(GCC / Europe cars)Flip key chip sold as 4D60 80-bit
Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.
Frequently asked questions
Which keys fit the Kia Picanto 2015?
15 listings fit the Kia Picanto 2015: smart keys, flip keys, remote keys, transponder keys, key shells, emergency blades and key blanks, in 2- and 3-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.
What frequency does the Kia Picanto 2015 remote use?
Every remote listed for the Kia Picanto 2015 transmits on 433 MHz.
Which transponder chip does the Kia Picanto 2015 key use?
The listings for this car carry: 4D-60 (80-bit) · ID46 (HITAG 2). Check the chip in each listing's specifications.
Which FCC IDs do Kia Picanto 2015 remotes carry?
The remotes listed for this car carry FCC ID DD2TX1307TA. Match it with the FCC ID printed on your original remote.
Which blade profile does the Kia Picanto 2015 key use?
The blades listed for this car: HYN17 · KIA7.
Which tools program a Kia Picanto 2015 key?
The tool makers' coverage lists name Autel IM608 II / IM608 Pro II, XTOOL X100 PAD3 / X100 MAX, Advanced Diagnostics Smart Pro, OBDSTAR Key Master G3, Launch X-431 IMMO and Lonsdor K518 for this car; 4 of them list all keys lost. Check your tool's latest coverage list before the job.














