Skip to content

Kia Pride 2014 Car Keys & Remotes

1 compatible key, remote & shell (genuine and aftermarket) available for the 2014 Kia Pride.

Key specifications for the Kia Pride 2012–2015

Key types
smart keys, key shells and emergency blades
Buttons
4-button
Blade profile
TOY48
Compatible FCC IDs

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Kia parts catalogue, with the specifications on each listing.

A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.

Programming the Kia Pride 2014 key

Smart key (push to start)

2 tools list this key. 1 of them list all keys lost.

  • OBDSTAR Key Master G3
    • Add key
    • All keys lost
    • Remote
    reads the PIN by OBD
  • OBDSTAR X300 DP Plus
    • Add key(non-US cars)

All keys lost is listed by OBDSTAR Key Master G3. OBDSTAR X300 DP Plus lists add key only.

Programming steps

Add key - OBDSTAR X300 DP(GCC / Europe cars)

Needs: a working 46-chip smart key, MINI900 / ND900 (CN900 mini) decoder, every fob the customer keeps, new 46-chip smart key

  1. Take the battery out of the working fob.
  2. Collect the 12-digit key code with the MINI900 / ND900 held with the fob at the start button (fob-slot cars: remove the slot holder first; repeat if it fails).
  3. On the tool select the car, Read PinCode, then the 46 smart card PIN function, and enter the 12 digits as the tool asks.
  4. Note the 6-digit PIN the tool returns.
  5. Run Smart key programming: ignition OFF, enter the PIN, then press the start button with each fob within 5 seconds (or put it in the slot) until each is accepted.
  6. Learn every fob to keep, then test lock, unlock and start.
Watch out: Smart key learning erases every fob first: all fobs the customer keeps must be learned again in the same session. A fob that was learned to another car cannot be learned again (Hyundai: permanently tied to the first VIN). Use a new fob with the right chip and frequency. Three wrong PIN entries lock key teaching for one hour; disconnecting the battery does not shorten the wait. Most of these cars take 2 fobs; some accept a 3rd (the tool asks after the 2nd fob).

Key with a blade (regular or flip)

One tool lists this key.

  • OBDSTAR Key Master G3
    • Add key
    • All keys lost
    • Remote
    reads the PIN by OBD

When the key changed

Smart key (push to start)

  • 2012 - 2017This yearChip: ID46(GCC / Europe cars)UB generation, sold as Rio outside Korea.

Key with a blade (regular or flip)

  • 2012 - 2017This yearChip: DST80(GCC / Europe cars)UB flip key; chip sold as 4D60 80-bit.

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the Kia Pride 2012–2015?

1 listing fit the Kia Pride 2012–2015: smart keys, key shells and emergency blades, in 4-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.

Which FCC IDs do Kia Pride 2012–2015 remotes carry?

The remotes listed for this car carry FCC ID SVIHMFCH34, SVIHMFEU04, SVIHMFKR04, SY5HMFNA04 and SY5RBFNA433. Match it with the FCC ID printed on your original remote.

Which blade profile does the Kia Pride 2012–2015 key use?

The blades listed for this car: TOY48.

Which tools program a Kia Pride 2012–2015 key?

The tool makers' coverage lists name OBDSTAR Key Master G3 and OBDSTAR X300 DP Plus for this car; 1 of them lists all keys lost. Check your tool's latest coverage list before the job.

Other Kia Pride years