Kia Sedona 2013 Key Fob & Car Keys
Keys that fit the 2012–2014 Kia Sedona: smart keys, remote keys and transponder keys, 3 buttons, 447 MHz. 4 compatible keys, remotes & shells (genuine and aftermarket) available for the 2013 Kia Sedona.
Last updated: 9 November 2026
Key specifications for the Kia Sedona 2012–2014
- Key types
- smart keys, remote keys, transponder keys, key shells and emergency blades
- Frequency
- 447 MHz
- Buttons
- 3-button
- Blade profile
- HYN14R
- Part numbers
- 95430-4D001 · 95430-4D002
To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Kia parts catalogue, with the specifications on each listing. Every remote listed for the Kia Sedona 2012–2014 transmits on 447 MHz.
A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.
Programming the Kia Sedona 2013 key
Key with a blade (regular or flip)
4 tools list this key. 4 of them list all keys lost.
- Add key
- All keys lost
- Remote
PIN read function- OBDSTAR Key Master G3
- Add key
- All keys lost
- Remote
reads the PIN by OBD - XTOOL X100 PAD3 / X100 MAX
- Add key
- All keys lost
- Remote
reads the PIN by OBD - Add key(US / Canada cars)
- All keys lost(US / Canada cars)
Programming steps
Add key - Autel MaxiIM IM608 (Transmitter code saving)(US / Canada cars)
Needs: working key to copy, remote (flip key or separate fob) for the car, every remote the customer keeps
- Confirm the car has no immobilizer: turn-key ignition, no start button and no immobilizer lamp in the cluster (the dealer can confirm by VIN).
- Duplicate the working key; with no immobilizer it starts the engine without programming.
- Connect the tool by OBD and open Transmitter code saving (remote keyless entry).
- Ignition OFF and key out when asked, then press LOCK on the first remote about 2 seconds after confirming.
- Repeat for each remote to keep (up to 4), then test lock and unlock.
- If the car has the dealer anti-theft logic upgrade, check it starts after locking and unlocking with the new remote.
Add key - Lonsdor K518
Needs: every key the customer keeps (all are taught again), new transponder key or flip remote with the right chip, cut to the lock, 6-digit PIN: tool PIN read where the tool list offers it for this car and chip, otherwise by VIN from the dealer, battery support (stable 12 V)
- Check the cluster shows an immobilizer lamp at ignition ON (US turn-key cars without one: use the US no-immobilizer case).
- Connect the K518 by OBD, choose the car and open the immobilizer key programming menu.
- Get the PIN: tool PIN read where offered, otherwise by VIN from the dealer.
- Start Key learning, switch the ignition ON with the first key and enter the PIN.
- Teach the first key; when asked, switch off, insert the next key and switch ON within about 10 seconds. Repeat for every key, the working ones included.
- Leave the ignition off for about 10 seconds, then start with each key.
- Learn the remotes with Transmitter code saving.
Add key - Lonsdor K518 (46-chip PIN read by OBD)
Needs: new 46-chip key(s) cut to the lock, every key the customer keeps
- Connect the K518 by OBD.
- Read PIN code (46 chip) by OBD with the ignition ON (a cut, unprogrammed key turns the lock).
- Open the Immobilizer key programming menu for the car, switch ON with the first key and enter the PIN.
- Program the first key, then switch off, insert the next key, switch ON and program it; repeat for every key to keep.
- Leave the ignition off for about 10 seconds and start with each key.
- Program the remotes in the Remote control system menu (ignition ON then OFF, key out, press a button on each remote when asked; up to 4).
All keys lost - Autel MaxiIM IM608 (Transmitter code saving)(US / Canada cars)
Needs: key code or lock decoding, remote (flip key or separate fob) for the car, every remote the customer keeps
- Confirm the car has no immobilizer: turn-key ignition, no start button and no immobilizer lamp in the cluster (the dealer can confirm by VIN).
- Cut the new key by key code or by decoding the lock; with no immobilizer it starts the engine without programming.
- Connect the tool by OBD and open Transmitter code saving (remote keyless entry).
- Ignition OFF and key out when asked, then press LOCK on the first remote about 2 seconds after confirming.
- Repeat for each remote to keep (up to 4), then test lock and unlock.
- If the car has the dealer anti-theft logic upgrade, check it starts after locking and unlocking with the new remote.
All keys lost - Lonsdor K518
Needs: two new transponder keys or flip remotes cut to the lock (by key code or decoding), 6-digit PIN: tool PIN read where the tool list offers it for this car and chip, otherwise by VIN from the dealer, battery support (stable 12 V)
- Cut a new key to the door / ignition lock so the ignition can be switched ON.
- Connect the K518 by OBD, choose the car and open the immobilizer key programming menu.
- Get the PIN: tool PIN read where offered, otherwise by VIN from the dealer.
- Start Key learning, switch the ignition ON with the first key and enter the PIN.
- Teach each new key in turn (switch off, next key, ON within about 10 seconds).
- Leave the ignition off for about 10 seconds, then start with each key.
- Learn the remotes with Transmitter code saving.
All keys lost - Lonsdor K518 (46-chip PIN read by OBD)
Needs: new 46-chip key(s) cut to the lock, at least two new keys
- Connect the K518 by OBD.
- Read PIN code (46 chip) by OBD with the ignition ON (a cut, unprogrammed key turns the lock).
- Open the Immobilizer key programming menu for the car, switch ON with the first key and enter the PIN.
- Program the first key, then switch off, insert the next key, switch ON and program it; repeat for every key to keep.
- Leave the ignition off for about 10 seconds and start with each key.
- Program the remotes in the Remote control system menu (ignition ON then OFF, key out, press a button on each remote when asked; up to 4).
Key type not stated by the list
One tool lists this key.
- Launch X-431 IMMO
- Add key
- Remote
PIN read function
When the key changed
Smart key (push to start)
- 2015 - 2021Chip: ID47433 MHzFCC: SY5YPFGE04, SY5YPFGE06Third generation (YP); Carnival outside the US
Key with a blade (regular or flip)
- 2006 - 2014This yearChip: ID46Some US 2011-2014 Sedonas were built without immobilizer
- 2015 - 2020Chip: DST80433 MHz(GCC / Europe cars)Carnival flip key; US Sedona flips have no chip
Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.
Frequently asked questions
Which keys fit the Kia Sedona 2012–2014?
4 listings fit the Kia Sedona 2012–2014: smart keys, remote keys, transponder keys, key shells and emergency blades, in 3-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.
What frequency does the Kia Sedona 2012–2014 remote use?
Every remote listed for the Kia Sedona 2012–2014 transmits on 447 MHz.
Which blade profile does the Kia Sedona 2012–2014 key use?
The blades listed for this car: HYN14R.
Which tools program a Kia Sedona 2012–2014 key?
The tool makers' coverage lists name Lonsdor K518, OBDSTAR Key Master G3, XTOOL X100 PAD3 / X100 MAX, Autel IM608 II / IM608 Pro II and Launch X-431 IMMO for this car; 4 of them list all keys lost. Check your tool's latest coverage list before the job.



