Skip to content

Kia Soul 2020 Key Fob & Car Keys

Keys that fit the 2020 Kia Soul: smart keys, flip keys and remote keys, 3, 4 or 5 buttons, FCC ID SY5SKFGE04, SY5MQ4FGE05 or SY5SKRGE04, ID46 / ID47 / ID4A (writable) or 4A (HITAG AES) chip, 433 MHz. 15 compatible keys, remotes & shells (genuine and aftermarket) available for the 2020 Kia Soul.

Last updated: 17 November 2026

Key specifications for the Kia Soul 2020

Key types
smart keys, flip keys, remote keys, transponder keys, key shells, emergency blades and key blanks
Frequency
433 MHz
Buttons
3-, 4- and 5-button
Transponder chip
ID46 / ID47 / ID4A (writable) · 4A (HITAG AES) · NXP PCF7939MA
Blade profile
KK12 · TOY49 · HY22
Part numbers
95440-K0200 · 95440-K0000 · 95440-K0310 · 95430-K0000 · 95440-K0300
Battery
CR2032

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Kia parts catalogue, with the specifications on each listing. Every remote listed for the Kia Soul 2020 transmits on 433 MHz.

A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.

Programming the Kia Soul 2020 key

Smart key (push to start)

6 tools list this key. 3 of them list all keys lost.

  • OBDSTAR Key Master G3
    • Add key
    • All keys lost
    • Remote
    reads the PIN by OBD
  • XTOOL X100 PAD3 / X100 MAX
    • Add key
    • All keys lost
    reads the PIN by OBD
  • Advanced Diagnostics Smart Pro
    • All keys lost
    • Remote
    online calculation · PIN read function
    Needs: AD ADC2000 cable, AD Smart Aerial
  • Launch X-431 IMMO
    • Add key
    • Add key
    PIN read function
    • Universal key

All keys lost is listed by OBDSTAR Key Master G3, XTOOL X100 PAD3 / X100 MAX and Advanced Diagnostics Smart Pro. Launch X-431 IMMO and Lonsdor K518 list add key only.

Programming steps

All keys lost - Advanced Diagnostics Smart Pro

Needs: ADS2280 or ADS2321 software, ADC2000 cable, new keys (blade: cut to the lock), internet only for ADS2331 PIN reading

  1. Connect the Smart Pro by OBD with the ADC2000 cable and choose the car in the Hyundai-Kia software.
  2. Let the software read the PIN (no working key needed on the listed cars); if it reports PIN read not supported, get the PIN from the dealer.
  3. Accept the erase of all keys and remotes.
  4. Smart: press the start button with each new fob as prompted (transponder and remote are learned together).
  5. Test start and lock / unlock with every key.
Watch out: All keys and remotes are erased before programming: bring every key the customer keeps. Three wrong PIN entries lock key teaching for one hour; disconnecting the battery does not shorten the wait.

Key with a blade (regular or flip)

7 tools list this key. 4 of them list all keys lost.

  • Advanced Diagnostics Smart Pro
    • Add key
    • All keys lost
    • Remote
    online calculation · PIN read function
    Needs: AD ADC2000 cable, AD Smart Aerial
  • OBDSTAR Key Master G3
    • Add key
    • All keys lost
    • Remote
    reads the PIN by OBD
  • XTOOL X100 PAD3 / X100 MAX
    • Add key
    • All keys lost
    • Remote
    reads the PIN by OBD
    • Add key(US / Canada cars)
    • All keys lost(US / Canada cars)
    • Add key
    • Remote
    • Universal key
    • Universal key

All keys lost is listed by Advanced Diagnostics Smart Pro, OBDSTAR Key Master G3, XTOOL X100 PAD3 / X100 MAX and Autel IM608 II / IM608 Pro II. Lonsdor K518 lists add key only.

Programming steps

Add key - Autel MaxiIM IM608 (Transmitter code saving)(US / Canada cars)

Needs: working key to copy, remote (flip key or separate fob) for the car, every remote the customer keeps

  1. Confirm the car has no immobilizer: turn-key ignition, no start button and no immobilizer lamp in the cluster (the dealer can confirm by VIN).
  2. Duplicate the working key; with no immobilizer it starts the engine without programming.
  3. Connect the tool by OBD and open Transmitter code saving (remote keyless entry).
  4. Ignition OFF and key out when asked, then press LOCK on the first remote about 2 seconds after confirming.
  5. Repeat for each remote to keep (up to 4), then test lock and unlock.
  6. If the car has the dealer anti-theft logic upgrade, check it starts after locking and unlocking with the new remote.
Watch out: Only for US cars built without an immobilizer; a car with the immobilizer lamp follows the blade key teaching case. With the dealer anti-theft logic installed, locking with the fob arms the start block and unlocking with a learned fob releases it: the customer needs a learned remote. Remote code saving can drop remotes not pressed in the session: bring them all.
All keys lost - Autel MaxiIM IM608 (Transmitter code saving)(US / Canada cars)

Needs: key code or lock decoding, remote (flip key or separate fob) for the car, every remote the customer keeps

  1. Confirm the car has no immobilizer: turn-key ignition, no start button and no immobilizer lamp in the cluster (the dealer can confirm by VIN).
  2. Cut the new key by key code or by decoding the lock; with no immobilizer it starts the engine without programming.
  3. Connect the tool by OBD and open Transmitter code saving (remote keyless entry).
  4. Ignition OFF and key out when asked, then press LOCK on the first remote about 2 seconds after confirming.
  5. Repeat for each remote to keep (up to 4), then test lock and unlock.
  6. If the car has the dealer anti-theft logic upgrade, check it starts after locking and unlocking with the new remote.
Watch out: Only for US cars built without an immobilizer; a car with the immobilizer lamp follows the blade key teaching case. With the dealer anti-theft logic installed, locking with the fob arms the start block and unlocking with a learned fob releases it: the customer needs a learned remote. Remote code saving can drop remotes not pressed in the session: bring them all.

When the key changed

Smart key (push to start)

  • 2011 - 2013Chip: ID46FCC: SY5HMFNA04US fobs 315 MHz
  • 2014 - 2019Chip: 8A433 MHzFCC: CQOFN00100
  • from 2020This yearChip: 4A433 MHzFCC: SY5SKFGE04

Key with a blade (regular or flip)

  • 2009 - 2013Chip: ID46433 MHz(GCC / Europe cars)US flips have no chip
  • 2014 - 2019Chip: DST80433 MHz(GCC / Europe cars)Flip key chip sold as 4D60 80-bit; US flips have no chip
  • from 2020This yearChip: 4A433 MHzFlips 95430-K0000 / K0010 have no chip

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the Kia Soul 2020?

15 listings fit the Kia Soul 2020: smart keys, flip keys, remote keys, transponder keys, key shells, emergency blades and key blanks, in 3-, 4- and 5-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.

What frequency does the Kia Soul 2020 remote use?

Every remote listed for the Kia Soul 2020 transmits on 433 MHz.

Which transponder chip does the Kia Soul 2020 key use?

The listings for this car carry: ID46 / ID47 / ID4A (writable) · 4A (HITAG AES) · NXP PCF7939MA. Check the chip in each listing's specifications.

Which FCC IDs do Kia Soul 2020 remotes carry?

The remotes listed for this car carry FCC ID CQ0FN01050, FG00800, FG01350, SY5MQ4FGE04, SY5MQ4FGE05, SY5SKFGE04, SY5SKRGE04 and TQ8F0B4F24. Match it with the FCC ID printed on your original remote.

Which blade profile does the Kia Soul 2020 key use?

The blades listed for this car: KK12 · TOY49 · HY22.

Which tools program a Kia Soul 2020 key?

The tool makers' coverage lists name OBDSTAR Key Master G3, XTOOL X100 PAD3 / X100 MAX, Advanced Diagnostics Smart Pro, Launch X-431 IMMO, Lonsdor K518 and Autel KM100 (IKEY universal smart key) for this car; 3 of them list all keys lost. Check your tool's latest coverage list before the job.