Skip to content

Kia Stonic 2023 Key Fob & Car Keys

Keys that fit the 2022–2023 Kia Stonic: smart keys and transponder keys, 3 buttons, FCC ID SYEC3F0B1611, 8A (H-chip) chip, 433 MHz. 7 compatible keys, remotes & shells (genuine and aftermarket) available for the 2023 Kia Stonic.

Last updated: 16 November 2026

Key specifications for the Kia Stonic 2022–2023

Key types
smart keys, transponder keys, key shells and emergency blades
Frequency
433 MHz
Buttons
3-button
Transponder chip
8A (H-chip)
Battery
CR2032
Compatible FCC IDs

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Kia parts catalogue, with the specifications on each listing. Every remote listed for the Kia Stonic 2022–2023 transmits on 433 MHz.

A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.

Programming the Kia Stonic 2023 key

Smart key (push to start)

2 tools list this key. 2 of them list all keys lost.

  • OBDSTAR Key Master G3
    • Add key
    • All keys lost
    • Remote
    reads the PIN by OBD
    • Add key
    • All keys lost(non-US cars)
    PIN read function

Programming steps

Add key - Lonsdor K518(GCC / Europe cars)

Needs: every fob the customer keeps (all are erased and learned again), new, never-learned smart key with the right chip and frequency, 6-digit PIN: tool PIN read where the tool list offers it for this car and chip, otherwise by VIN from the dealer

  1. Connect the K518 by OBD, identify the car (VIN, or model and year) and open the Smart key system.
  2. Get the PIN: the tool's PIN function for the key type, or by VIN from the dealer.
  3. Start Smart key learning and accept the warning that all fobs will be erased.
  4. Ignition OFF, then enter the PIN when the tool asks.
  5. Press OK, then within 5 seconds press the start button with the first fob until the tool confirms (cars with a fob slot or holder: put the fob in it).
  6. Repeat for every fob, the old ones included; stop after the last one.
  7. Check that each fob locks, unlocks and starts the car.
Watch out: Smart key learning erases every fob first: all fobs the customer keeps must be learned again in the same session. A fob that was learned to another car cannot be learned again (Hyundai: permanently tied to the first VIN). Use a new fob with the right chip and frequency. Three wrong PIN entries lock key teaching for one hour; disconnecting the battery does not shorten the wait. Most of these cars take 2 fobs; some accept a 3rd (the tool asks after the 2nd fob).
All keys lost - Lonsdor K518(GCC / Europe cars)

Needs: two new, never-learned smart keys with the right chip and frequency, PIN by VIN from the dealer, emergency blade cut to the door lock

  1. Open the car with the emergency blade cut to the door lock.
  2. Connect the K518 by OBD and enter the VIN by hand (auto VIN can fail with no fob in the car).
  3. Get the PIN by VIN from the dealer.
  4. Start Smart key learning and accept the erase warning.
  5. Ignition OFF, then enter the PIN when the tool asks.
  6. Press OK, then within 5 seconds press the start button with the first new fob until the tool confirms.
  7. Repeat for the second fob, then test lock, unlock and start with each.
Watch out: Three wrong PIN entries lock key teaching for one hour; disconnecting the battery does not shorten the wait. A fob that was learned to another car cannot be learned again (Hyundai: permanently tied to the first VIN). Use a new fob with the right chip and frequency. Lost fobs are erased by the learning. Most of these cars take 2 fobs; some accept a 3rd (the tool asks after the 2nd fob).

Key with a blade (regular or flip)

2 tools list this key. 1 of them list all keys lost.

  • OBDSTAR Key Master G3
    • Add key
    • All keys lost
    • Remote
    reads the PIN by OBD
    • Add key
    • Remote
    PIN read function

All keys lost is listed by OBDSTAR Key Master G3. Lonsdor K518 lists add key only.

Key type not stated by the list

One tool lists this key.

  • Launch X-431 IMMO
    • Add key
    • Remote
    PIN read function

When the key changed

Smart key (push to start)

  • 2017 - 2023This yearChip: 8A433 MHzFCC: NYOSYEC4FOB1611, SYEC3FOB1611(GCC / Europe cars)YB CUV; push-start trims only.

Key with a blade (regular or flip)

  • 2017 - 2020Chip: DST80433 MHz(GCC / Europe cars)Flip key chip sold as 4D60 80-bit

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the Kia Stonic 2022–2023?

7 listings fit the Kia Stonic 2022–2023: smart keys, transponder keys, key shells and emergency blades, in 3-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.

What frequency does the Kia Stonic 2022–2023 remote use?

Every remote listed for the Kia Stonic 2022–2023 transmits on 433 MHz.

Which transponder chip does the Kia Stonic 2022–2023 key use?

The listings for this car carry: 8A (H-chip). Check the chip in each listing's specifications.

Which FCC IDs do Kia Stonic 2022–2023 remotes carry?

The remotes listed for this car carry FCC ID SYEC3F0B1611. Match it with the FCC ID printed on your original remote.

Which tools program a Kia Stonic 2022–2023 key?

The tool makers' coverage lists name OBDSTAR Key Master G3, Lonsdor K518 and Launch X-431 IMMO for this car; 2 of them list all keys lost. Check your tool's latest coverage list before the job.