Skip to content

Land Rover Range Rover 2018 Key Fob & Car Keys

Keys that fit the 2018 Land Rover Range Rover: smart keys, 4 or 5 buttons, FCC ID N8EM15K601CA, CQ0TD00660 or K0BJTF10A, ID49 (HITAG Pro) chip, 315 MHz or 433 MHz. 19 compatible keys, remotes & shells (genuine and aftermarket) available for the 2018 Land Rover Range Rover.

Last updated: 15 November 2026

Key specifications for the Land Rover Range Rover 2018

Key types
smart keys, key shells, emergency blades and key blanks
Frequency
315 MHz and 433 MHz
Buttons
4- and 5-button
Transponder chip
ID49 (HITAG Pro)
Blade profile
HU101
Part numbers
CH22-15K601-BE · JK52-15K601-DK · N8EM-15K601-CA
Battery
CR2032

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Land Rover parts catalogue, with the specifications on each listing. The frequency depends on the market the car was sold in, so check 315 MHz and 433 MHz against your original before ordering.

A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.

Programming the Land Rover Range Rover 2018 key

Smart key (push to start)

3 tools list this key. 2 of them list all keys lost.

Programming steps

Add key - Lonsdor K518ISE / K518 Pro

Needs: working key, Lonsdor JLR key, Lonsdor JLR license

  1. Check whether the car has keyless entry (doors open by holding the handle).
  2. Open Immo & Remote, Land Rover, Select from vehicle, Land Rover (2018-), Smart key, and read the key information.
  3. Use Copy and add smart key: the tool copies the working key into its position, or writes a new key into the position of a lost key.
  4. Test the new key: remote and emergency start should work.
  5. If the car has keyless entry and the customer needs proximity on the new key, that needs the all-keys-lost route instead.
Watch out: If the menu asks for a 32-bit secret key, OBD copy is not supported on that car. K8D2 RFA versions need the JLR dealer tool, not the K518.
All keys lost - Autel MaxiIM IM608 + XP400 Pro (RFA dump)

Needs: APA106 cable, blank smart key, soldering station, internet connection

  1. Open IMMO, Land Rover, manual selection, Range Rover, 2015 up, Smart key and read the operation guide.
  2. Remove the RFA (KVM) module and open the case.
  3. Connect the module MCU to the XP400 Pro with the APA106 cable exactly as the tool's wiring diagram shows.
  4. Read the chip status, then read the DFLASH and EEPROM in secure mode and save both files.
  5. Choose Start key writing, load the saved files, pick a blank key position and write the dealer key.
  6. Write the new DFLASH and EEPROM files back to the MCU.
  7. Restore the board, refit the module and test the new key.
Watch out: Keep the original DFLASH and EEPROM files; they are the only way back. Connect the tablet to the internet before the procedure (Autel note).

Key type not stated by the list

2 tools list this key. 2 of them list all keys lost.

  • OBDSTAR Key Master G3
    • Add key
    • All keys lost
  • Launch X-431 IMMO
    • All keys lost

When the key changed

Smart key (push to start)

  • 2010 - 2017Chip: ID49FCC: KOBJTF10ALate L322 and L405 (KVM) smart key
  • 2018 - 2021This yearChip: ID49L405 from 2018 (RFA); not the 2013-2017 key
  • from 2022Chip: ID49L460

Key with a blade (regular or flip)

  • 2002 - 2005Chip: ID44Blade: HU92L322 BMW-era key, EWS, HU92 blade
  • 2006 - 2009Chip: ID46FCC: NT8-15K6014CFFTXAL322 flip key

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the Land Rover Range Rover 2018?

19 listings fit the Land Rover Range Rover 2018: smart keys, key shells, emergency blades and key blanks, in 4- and 5-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.

What frequency does the Land Rover Range Rover 2018 remote use?

Listings for the Land Rover Range Rover 2018 come in 315 MHz and 433 MHz: the frequency depends on the market the car was sold in, so check it against your original remote before ordering.

Which transponder chip does the Land Rover Range Rover 2018 key use?

The listings for this car carry: ID49 (HITAG Pro). Check the chip in each listing's specifications.

Which FCC IDs do Land Rover Range Rover 2018 remotes carry?

The remotes listed for this car carry FCC ID CQ0TD00660, K0BJTF10A, K0BJXF18A and N8EM15K601CA. Match it with the FCC ID printed on your original remote.

Which blade profile does the Land Rover Range Rover 2018 key use?

The blades listed for this car: HU101.

Which tools program a Land Rover Range Rover 2018 key?

The tool makers' coverage lists name Lonsdor K518, Autel IM608 II / IM608 Pro II, Autel KM100 (IKEY universal smart key), OBDSTAR Key Master G3 and Launch X-431 IMMO for this car; 4 of them list all keys lost. Check your tool's latest coverage list before the job.