Lexus ES 2003 Key Fob & Car Keys
Keys that fit the 2003 Lexus ES: remote keys and transponder keys, 3 buttons, FCC ID HYQ12BBT or HYQ1512V, 315 MHz. 11 compatible keys, remotes & shells (genuine and aftermarket) available for the 2003 Lexus ES.
Last updated: 15 November 2026
Key specifications for the Lexus ES 2003
- Key types
- remote keys, transponder keys, key shells and emergency blades
- Frequency
- 315 MHz
- Buttons
- 3-button
- Part numbers
- 89751-48031
To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Lexus parts catalogue, with the specifications on each listing. Every remote listed for the Lexus ES 2003 transmits on 315 MHz.
A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.
- Lexus ES GS IS LS RX SC GX LX 1998-2010 Remote Head Key Shell 3-button - TOY48 Short Blade
SKU: B02597
$1.12In Stock
Programming the Lexus ES 2003 key
Key with a blade (regular or flip)
One tool lists this key.
- Add key
- All keys lost
Programming steps
Add key - on the car(US / Canada cars)
Needs: the master key (black key), a new key cut to the car
- Put the master (black) key in the ignition.
- Within 15 seconds of inserting it, press and release the accelerator pedal 5 times.
- Within 20 seconds, press and release the brake pedal 6 times.
- Take the master key out, and within 10 seconds put the new key in.
- Within 10 seconds, press and release the accelerator pedal once. The immobilizer light flashes, then stops after about one minute.
- To add another key, put it in within 10 seconds of the light stopping, then within 10 seconds press and release the accelerator once. The light flashes and goes off after one minute.
Without a tool
The remote is programmed on the car, without a tool.
Programming steps
Program the remote without a tool(US / Canada cars)
Needs: every remote for the car, the car's key
- Start with the key out of the ignition. Unlock and open the driver's door; every other door stays closed.
- Within 5 seconds, insert the key without turning it and pull it out, two times.
- Within 40 seconds, close and open the driver's door twice, then insert the key and pull it out once.
- Within 40 seconds, close and open the driver's door twice, then insert the key and leave it in.
- Close the driver's door, turn the ignition to ON and back to OFF without cranking, and take the key out.
- Within 3 seconds the locks should lock and unlock by themselves: programming mode. If they do not, start again from step 1 or use the alternate method.
- Within 40 seconds, hold LOCK and UNLOCK on the remote together for 1.5 seconds, release, and at once press and hold LOCK alone.
- Within 10 seconds the locks lock and unlock once: remote accepted. If they cycle twice, it was not accepted; repeat step 7.
- Repeat steps 7 and 8 for each remote, then open the driver's door to finish.
Program the remote without a tool(US / Canada cars)
Needs: Alternate method, if the door locks did not cycle with the first method, every remote for the car
- Close all doors, then open the driver's door.
- Insert the key in the ignition and take it out.
- Press LOCK then UNLOCK on the door lock switch 5 times, about one second apart.
- Close and reopen the driver's door, then repeat the 5 LOCK and UNLOCK presses on the door switch.
- Insert the key, turn the ignition to ON and back to OFF without cranking, and take the key out. The locks cycle: programming mode.
- Avalon: press LOCK on the remote for at least 1 second. Other cars: hold LOCK and UNLOCK together for 1.5 seconds, then hold LOCK until the locks cycle.
- One lock cycle means the remote is programmed; two cycles means it failed.
- Repeat the button sequence for each remaining remote, then close the driver's door and test the remotes.
When the key changed
Smart key (push to start)
- 2007 - 2009Chip: 4D315 MHzFCC: HYQ14AAB(US / Canada cars)Board 0140 (page 94) smart key, push-start
- 2010 - 2012Chip: DST80315 MHzFCC: HYQ14AAB, HYQ14AEM(US / Canada cars)Board 3370 / 6601 (page 98) smart key
- 2013 - 2018Chip: 8AFCC: HYQ14FBAUS 315 MHz HYQ14FBA; GCC 433 MHz BC4EK type
- 2019 - 2025Chip: 8AFCC: HYQ14FBF, HYQ14FBZUS HYQ14FBF then HYQ14FBZ; GCC 433 MHz B2C2K2R type
Key with a blade (regular or flip)
- 1998 - 2003This yearChip: 4CTOY40 blade to 2001, TOY48 blade from 2002
- 2004 - 2006Chip: 4D-68Blade: TOY48ES330 remote head or plain key
Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.
Frequently asked questions
Which keys fit the Lexus ES 2003?
11 listings fit the Lexus ES 2003: remote keys, transponder keys, key shells and emergency blades, in 3-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.
What frequency does the Lexus ES 2003 remote use?
Every remote listed for the Lexus ES 2003 transmits on 315 MHz.
Which FCC IDs do Lexus ES 2003 remotes carry?
The remotes listed for this car carry FCC ID HYQ12BBT and HYQ1512V. Match it with the FCC ID printed on your original remote.
Which tools program a Lexus ES 2003 key?
The tool makers' coverage lists name Lonsdor K518 for this car; 1 of them lists all keys lost. Check your tool's latest coverage list before the job.
Can the Lexus ES 2003 remote be programmed without a tool?
The remote is programmed on the car, without a tool.










