Skip to content

Lexus ES 2005 Key Fob & Car Keys

Keys that fit the 2005 Lexus ES: remote keys and transponder keys, 3 buttons, FCC ID HYQ12BBK, HYQ12BBT or HYQ1512V, 4D-60 or 4D-68 chip, 313 MHz or 315 MHz. 15 compatible keys, remotes & shells (genuine and aftermarket) available for the 2005 Lexus ES.

Last updated: 15 November 2026

Key specifications for the Lexus ES 2005

Key types
remote keys, transponder keys, key shells, emergency blades and key blanks
Frequency
313 MHz and 315 MHz
Buttons
3-button
Transponder chip
4D-60 · 4D-68 · Not in the module; the head keeps its own chip
Blade profile
TOY50
Part numbers
89751-48031
Battery
CR2016
Compatible FCC IDs

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Lexus parts catalogue, with the specifications on each listing. The frequency depends on the market the car was sold in, so check 313 MHz and 315 MHz against your original before ordering.

A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.

Programming the Lexus ES 2005 key

Key with a blade (regular or flip)

3 tools list this key. 3 of them list all keys lost.

  • OBDSTAR Key Master G3
    • Add key
    • All keys lost
    • Remote
  • XTOOL X100 PAD3 / X100 MAX
    • Add key
    • All keys lost
    • Remote
    • Add key
    • All keys lost

Programming steps

Add key - Lonsdor K518ISE / K518S / K518 Pro

Needs: working master key, new key cut to the car with a 4D-68 chip (TOY48 / TOY50 blank)

  1. Check the customer's key is a master: in the ignition the security light stays off (a valet key lights it for about a second).
  2. Connect the K518 by OBD. Immobilizer > Lexus > select the model (ES330) and year > Mechanical key > Add key.
  3. Insert the master key and switch the ignition on.
  4. When asked, insert the new cut key and switch the ignition on and off as the tool prompts.
  5. Wait until the tool reports the key programmed and the security light goes out, then test that it starts.
  6. Remote-head key: program the remote part in the tool's Remote system menu (Type 1 by OBD, Type 2 by the manual sequence the tool shows), then test the buttons.
Watch out: A valet key cannot add keys: you need a master key. Lexus 4D keys of these years are 4D-68: a 4C or G key will not learn.
All keys lost - Lonsdor K518ISE / K518S / K518 Pro

Needs: new keys cut to the car with blank 4D-68 chips, no PIN entry (the tool resets by OBD)

  1. Cut every new key first, with 4D-68 chips, and have them on the bench.
  2. Connect the K518 by OBD. Immobilizer > Lexus > select the model (ES330) and year > Mechanical key > All keys lost (immobilizer reset).
  3. Follow the ignition prompts (off, on, off and remove the key, on again) while the tool resets the immobilizer.
  4. Within 120 s register the keys: insert a key, switch on and wait 5 s; repeat for each further key; with only one or two keys, finish by switching the ignition on and off quickly 5 times.
  5. The security light goes out when programming is done. Test every key.
  6. Add further keys later with the normal add-key routine and one of the new master keys.
  7. Remote-head key: program the remote part in the tool's Remote system menu (Type 1 by OBD, Type 2 by the manual sequence the tool shows), then test the buttons.
Watch out: The reset erases every registered key: bring every key the customer will keep and program them in the same session. You have about 120 s after the reset to register the keys. Keep the battery charged and steady during the reset.

When the key changed

Smart key (push to start)

  • 2007 - 2009Chip: 4D315 MHzFCC: HYQ14AAB(US / Canada cars)Board 0140 (page 94) smart key, push-start
  • 2010 - 2012Chip: DST80315 MHzFCC: HYQ14AAB, HYQ14AEM(US / Canada cars)Board 3370 / 6601 (page 98) smart key
  • 2013 - 2018Chip: 8AFCC: HYQ14FBAUS 315 MHz HYQ14FBA; GCC 433 MHz BC4EK type
  • 2019 - 2025Chip: 8AFCC: HYQ14FBF, HYQ14FBZUS HYQ14FBF then HYQ14FBZ; GCC 433 MHz B2C2K2R type

Key with a blade (regular or flip)

  • 1998 - 2003Chip: 4CTOY40 blade to 2001, TOY48 blade from 2002
  • 2004 - 2006This yearChip: 4D-68Blade: TOY48ES330 remote head or plain key

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the Lexus ES 2005?

15 listings fit the Lexus ES 2005: remote keys, transponder keys, key shells, emergency blades and key blanks, in 3-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.

What frequency does the Lexus ES 2005 remote use?

Listings for the Lexus ES 2005 come in 313 MHz and 315 MHz: the frequency depends on the market the car was sold in, so check it against your original remote before ordering.

Which transponder chip does the Lexus ES 2005 key use?

The listings for this car carry: 4D-60 · 4D-68 · Not in the module; the head keeps its own chip. Check the chip in each listing's specifications.

Which FCC IDs do Lexus ES 2005 remotes carry?

The remotes listed for this car carry FCC ID HYQ12BBK, HYQ12BBT and HYQ1512V. Match it with the FCC ID printed on your original remote.

Which blade profile does the Lexus ES 2005 key use?

The blades listed for this car: TOY50.

Which tools program a Lexus ES 2005 key?

The tool makers' coverage lists name OBDSTAR Key Master G3, XTOOL X100 PAD3 / X100 MAX and Lonsdor K518 for this car; 3 of them list all keys lost. Check your tool's latest coverage list before the job.