Lexus GX 2003–2008 Key Fob & Car Keys
Keys that fit the 2003–2008 Lexus GX: remote keys and transponder keys, 3 buttons, FCC ID HYQ1512V, 4D-60 or 4D-68 chip, 315 MHz. 11 compatible keys, remotes & shells (genuine and aftermarket) available for the 2003 Lexus GX.
Last updated: 12 November 2026
Key specifications for the Lexus GX 2003–2008
- Key types
- remote keys, transponder keys, key shells, emergency blades and key blanks
- Frequency
- 315 MHz
- Buttons
- 3-button
- Transponder chip
- 4D-60 · 4D-68
- Blade profile
- TOY50
- Part numbers
- 89070-60801 / 89070-60750 / 89070-60090
- Compatible FCC IDs
To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Lexus parts catalogue, with the specifications on each listing. Every remote listed for the Lexus GX 2003–2008 transmits on 315 MHz.
A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.
- $1.69In Stock
- Lexus ES GS IS LS RX SC GX LX 1998-2010 Remote Head Key Shell 3-button - TOY48 Short Blade
SKU: B02597
$1.12In Stock
Programming the Lexus GX 2003 key
Key with a blade (regular or flip)
3 tools list this key. 3 of them list all keys lost.
- Add key
- All keys lost
- Remote
- OBDSTAR Key Master G3
- Add key
- All keys lost
- Remote
- XTOOL X100 PAD3 / X100 MAX
- Add key
- All keys lost
- Remote
Programming steps
Add key - Lonsdor K518ISE / K518S / K518 Pro
Needs: working master key, new key cut to the car with a 4D-68 chip (TOY48 / TOY50 blank)
- Check the customer's key is a master: in the ignition the security light stays off (a valet key lights it for about a second).
- Connect the K518 by OBD. Immobilizer > Lexus > select the model (GX470) and year > Mechanical key > Add key.
- Insert the master key and switch the ignition on.
- When asked, insert the new cut key and switch the ignition on and off as the tool prompts.
- Wait until the tool reports the key programmed and the security light goes out, then test that it starts.
- Remote-head key: program the remote part in the tool's Remote system menu (Type 1 by OBD, Type 2 by the manual sequence the tool shows), then test the buttons.
All keys lost - Lonsdor K518ISE / K518S / K518 Pro
Needs: new keys cut to the car with blank 4D-68 chips, no PIN entry (the tool resets by OBD)
- Cut every new key first, with 4D-68 chips, and have them on the bench.
- Connect the K518 by OBD. Immobilizer > Lexus > select the model (GX470) and year > Mechanical key > All keys lost (immobilizer reset).
- Follow the ignition prompts (off, on, off and remove the key, on again) while the tool resets the immobilizer.
- Within 120 s register the keys: insert a key, switch on and wait 5 s; repeat for each further key; with only one or two keys, finish by switching the ignition on and off quickly 5 times.
- The security light goes out when programming is done. Test every key.
- Add further keys later with the normal add-key routine and one of the new master keys.
- Remote-head key: program the remote part in the tool's Remote system menu (Type 1 by OBD, Type 2 by the manual sequence the tool shows), then test the buttons.
Without a tool
Programming steps
Program the remote without a tool(US / Canada cars)
Needs: every remote for the car, the car's key
- Start with the key out of the ignition. Unlock and open the driver's door; every other door stays closed.
- Within 5 seconds, insert the key without turning it and pull it out, two times.
- Within 40 seconds, close and open the driver's door twice, then insert the key and pull it out once.
- Within 40 seconds, close and open the driver's door twice, then insert the key and leave it in.
- Close the driver's door, turn the ignition to ON and back to OFF without cranking, and take the key out.
- Within 3 seconds the locks should lock and unlock by themselves: programming mode. If they do not, start again from step 1 or use the alternate method.
- Within 40 seconds, hold LOCK and UNLOCK on the remote together for 1.5 seconds, release, and at once press and hold LOCK alone.
- Within 10 seconds the locks lock and unlock once: remote accepted. If they cycle twice, it was not accepted; repeat step 7.
- Repeat steps 7 and 8 for each remote, then open the driver's door to finish.
Program the remote without a tool(US / Canada cars)
Needs: Alternate method, if the door locks did not cycle with the first method, every remote for the car
- Close all doors, then open the driver's door.
- Insert the key in the ignition and take it out.
- Press LOCK then UNLOCK on the door lock switch 5 times, about one second apart.
- Close and reopen the driver's door, then repeat the 5 LOCK and UNLOCK presses on the door switch.
- Insert the key, turn the ignition to ON and back to OFF without cranking, and take the key out. The locks cycle: programming mode.
- Avalon: press LOCK on the remote for at least 1 second. Other cars: hold LOCK and UNLOCK together for 1.5 seconds, then hold LOCK until the locks cycle.
- One lock cycle means the remote is programmed; two cycles means it failed.
- Repeat the button sequence for each remaining remote, then close the driver's door and test the remotes.
When the key changed
Smart key (push to start)
- 2010 - 2014Chip: DST80433 MHz(GCC / Europe cars)GX460 / GX400 page 98 key, B74EA type
- 2010 - 2020Chip: DST80315 MHzFCC: HYQ14ACX(US / Canada cars)Page 98 key; 2019-2020 cars can carry the 8A key
- 2019 - 2023Chip: 8A315 MHzFCC: HYQ14FBF, HYQ14FBZ(US / Canada cars)HYQ14FBZ on 2021-2023 cars; check the FCC id
- from 2024Chip: 8A315 MHzFCC: HYQ14FLC, HYQ14CBP(US / Canada cars)GX550 fob or card key; match the key type
Key with a blade (regular or flip)
- 2003 - 2009This yearChip: 4D-68Blade: TOY48FCC: HYQ1512VGX470 remote head key
Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.
Frequently asked questions
Which keys fit the Lexus GX 2003–2008?
11 listings fit the Lexus GX 2003–2008: remote keys, transponder keys, key shells, emergency blades and key blanks, in 3-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.
What frequency does the Lexus GX 2003–2008 remote use?
Every remote listed for the Lexus GX 2003–2008 transmits on 315 MHz.
Which transponder chip does the Lexus GX 2003–2008 key use?
The listings for this car carry: 4D-60 · 4D-68. Check the chip in each listing's specifications.
Which FCC IDs do Lexus GX 2003–2008 remotes carry?
The remotes listed for this car carry FCC ID HYQ1512V. Match it with the FCC ID printed on your original remote.
Which blade profile does the Lexus GX 2003–2008 key use?
The blades listed for this car: TOY50.
Which tools program a Lexus GX 2003–2008 key?
The tool makers' coverage lists name Lonsdor K518, OBDSTAR Key Master G3 and XTOOL X100 PAD3 / X100 MAX for this car; 3 of them list all keys lost. Check your tool's latest coverage list before the job.










