Skip to content

Lexus LX 2003–2004 Key Fob & Car Keys

Keys that fit the 2003–2004 Lexus LX: remote keys and transponder keys, 2 or 3 buttons, FCC ID HYQ1512V, 4D-60 or 4D-68 chip, 315 MHz or 433 MHz. 14 compatible keys, remotes & shells (genuine and aftermarket) available for the 2003 Lexus LX.

Last updated: 12 November 2026

Key specifications for the Lexus LX 2003–2004

Key types
remote keys, transponder keys, key shells, emergency blades and key blanks
Frequency
315 MHz and 433 MHz
Buttons
2- and 3-button
Transponder chip
4D-60 · 4D-68
Blade profile
TOY50
Part numbers
89070-60801 / 89070-60750 / 89070-60090 · 89070-4D101
Compatible FCC IDs

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Lexus parts catalogue, with the specifications on each listing. The frequency depends on the market the car was sold in, so check 315 MHz and 433 MHz against your original before ordering.

A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.

Programming the Lexus LX 2003 key

Key with a blade (regular or flip)

5 tools list this key. 3 of them list all keys lost.

Programming steps

Add key - Lonsdor K518ISE / K518S / K518 Pro

Needs: working master key, new key cut to the car with a 4D-68 chip (TOY48 / TOY50 blank)

  1. Check the customer's key is a master: in the ignition the security light stays off (a valet key lights it for about a second).
  2. Connect the K518 by OBD. Immobilizer > Lexus > select the model (LX470) and year > Mechanical key > Add key.
  3. Insert the master key and switch the ignition on.
  4. When asked, insert the new cut key and switch the ignition on and off as the tool prompts.
  5. Wait until the tool reports the key programmed and the security light goes out, then test that it starts.
  6. Remote-head key: program the remote part in the tool's Remote system menu (Type 1 by OBD, Type 2 by the manual sequence the tool shows), then test the buttons.
Watch out: A valet key cannot add keys: you need a master key. Lexus 4D keys of these years are 4D-68: a 4C or G key will not learn.
All keys lost - Lonsdor K518ISE / K518S / K518 Pro

Needs: new keys cut to the car with blank 4D-68 chips, no PIN entry (the tool resets by OBD)

  1. Cut every new key first, with 4D-68 chips, and have them on the bench.
  2. Connect the K518 by OBD. Immobilizer > Lexus > select the model (LX470) and year > Mechanical key > All keys lost (immobilizer reset).
  3. Follow the ignition prompts (off, on, off and remove the key, on again) while the tool resets the immobilizer.
  4. Within 120 s register the keys: insert a key, switch on and wait 5 s; repeat for each further key; with only one or two keys, finish by switching the ignition on and off quickly 5 times.
  5. The security light goes out when programming is done. Test every key.
  6. Add further keys later with the normal add-key routine and one of the new master keys.
  7. Remote-head key: program the remote part in the tool's Remote system menu (Type 1 by OBD, Type 2 by the manual sequence the tool shows), then test the buttons.
Watch out: The reset erases every registered key: bring every key the customer will keep and program them in the same session. You have about 120 s after the reset to register the keys. Keep the battery charged and steady during the reset.

Without a tool

Programming steps

Program the remote without a tool(US / Canada cars)

Needs: every remote for the car, the car's key

  1. Start with the key out of the ignition. Unlock and open the driver's door; every other door stays closed.
  2. Within 5 seconds, insert the key without turning it and pull it out, two times.
  3. Within 40 seconds, close and open the driver's door twice, then insert the key and pull it out once.
  4. Within 40 seconds, close and open the driver's door twice, then insert the key and leave it in.
  5. Close the driver's door, turn the ignition to ON and back to OFF without cranking, and take the key out.
  6. Within 3 seconds the locks should lock and unlock by themselves: programming mode. If they do not, start again from step 1 or use the alternate method.
  7. Within 40 seconds, hold LOCK and UNLOCK on the remote together for 1.5 seconds, release, and at once press and hold LOCK alone.
  8. Within 10 seconds the locks lock and unlock once: remote accepted. If they cycle twice, it was not accepted; repeat step 7.
  9. Repeat steps 7 and 8 for each remote, then open the driver's door to finish.
Watch out: Do not crank the engine when turning the ignition ON and OFF.

When the key changed

Smart key (push to start)

  • 2010 - 2015Chip: DST80LX570 page 98 key; 2008-2009 keys may be 4D (page D4)
  • 2016 - 2021Chip: 8AFCC: HYQ14FBALX570 A8 keys, later A9; match the part number
  • from 2022Chip: 8AFCC: HYQ14FLCLX600 BA type key, not the LX570 key

Key with a blade (regular or flip)

  • 1998 - 2002Chip: 4CLX470; TOY40 blade to 2000, TOY48 from 2001
  • 2003 - 2007This yearChip: 4D-68Blade: TOY48LX470 remote head key

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the Lexus LX 2003–2004?

14 listings fit the Lexus LX 2003–2004: remote keys, transponder keys, key shells, emergency blades and key blanks, in 2- and 3-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.

What frequency does the Lexus LX 2003–2004 remote use?

Listings for the Lexus LX 2003–2004 come in 315 MHz and 433 MHz: the frequency depends on the market the car was sold in, so check it against your original remote before ordering.

Which transponder chip does the Lexus LX 2003–2004 key use?

The listings for this car carry: 4D-60 · 4D-68. Check the chip in each listing's specifications.

Which FCC IDs do Lexus LX 2003–2004 remotes carry?

The remotes listed for this car carry FCC ID HYQ1512V. Match it with the FCC ID printed on your original remote.

Which blade profile does the Lexus LX 2003–2004 key use?

The blades listed for this car: TOY50.

Which tools program a Lexus LX 2003–2004 key?

The tool makers' coverage lists name Lonsdor K518, OBDSTAR Key Master G3, XTOOL X100 PAD3 / X100 MAX, Xhorse VVDI Key Tool Max and Xhorse VVDI Key Tool Plus for this car; 3 of them list all keys lost. Check your tool's latest coverage list before the job.