Skip to content

Lexus NX 2017 Key Fob & Car Keys

Keys that fit the 2017 Lexus NX: smart keys, 2, 3 or 4 buttons, FCC ID HYQ14FBA or BC4EK, 8A (H-chip) chip, 315 MHz or 433 MHz. 12 compatible keys, remotes & shells (genuine and aftermarket) available for the 2017 Lexus NX.

Last updated: 17 November 2026

Key specifications for the Lexus NX 2017

Key types
smart keys, key shells and emergency blades
Frequency
315 MHz and 433 MHz
Buttons
2-, 3- and 4-button
Transponder chip
8A (H-chip)
Blade profile
LXP90
Battery
CR2032
Compatible FCC IDs

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Lexus parts catalogue, with the specifications on each listing. The frequency depends on the market the car was sold in, so check 315 MHz and 433 MHz against your original before ordering.

A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.

Programming the Lexus NX 2017 key

Smart key (push to start)

6 tools list this key. 6 of them list all keys lost.

Programming steps

Add key - Lonsdor K518ISE / K518S / K518 Pro

Needs: working smart key, Lonsdor Super ADP 8A/4A adapter when the OBD backup fails, new smart key, internet connection

  1. Immo & Remote > Lexus > select the model (NX200t / NX300 / NX300h) > Smart key > Backup immo data, by OBD or with the ADP adapter on the smart box; save the data.
  2. Add smart key: switch on with the working key, then ignition off and hazards on when asked; load the saved data.
  3. Working key to the Start button until one beep, then within 30 s the new key until two beeps.
  4. Switch on, touch a programmed key to the Start button, then test start and remote.
Watch out: Bring every key the customer keeps; check the remote buttons on each after programming. If the smart box is full, delete unused keys first.
All keys lost - Lonsdor K518ISE / K518S / K518 Pro

Needs: LKE emulator (K518ISE / K518S), Lonsdor Super ADP 8A/4A adapter when the OBD backup fails, new smart key (OEM or Lonsdor FT key), internet connection, no PIN from the dealer (the code is derived from the backup)

  1. Bind the LKE emulator to the K518ISE / K518S (the K518 Pro generates the emergency key without an LKE).
  2. Immo & Remote > Lexus > select the model (NX200t / NX300 / NX300h) > Smart key > All smart key lost > Backup immo data. Try by OBD first; if it fails, connect the ADP adapter between the smart box and its harness.
  3. Turn the hazard lights on when asked, enter the VIN if asked, let the tool calculate online and save the data.
  4. Refit the smart box plug, connect by OBD, put the LKE in the card slot and generate the emergency key from the saved data.
  5. Add smart key: switch on with the LKE at the Start button, then ignition off and hazards on when asked; load the saved data.
  6. Registered key (LKE) to the Start button until one beep, then within 30 s the new key until two beeps.
  7. Switch on and touch a programmed key to the Start button (one beep), then test start and remote.
  8. Delete lost keys with Delete smart key if the customer wants them gone.
Watch out: The car battery must be charged; the data backup needs an internet connection. The emulator is erased if you use the device for another key job before adding the key: add the new key straight after generating it. The ADP adapter is bound to one K518 for good.

When the key changed

Smart key (push to start)

  • 2015 - 2021This yearChip: 8A433 MHz(GCC / Europe cars)GCC / Europe key BG1EW, page A8
  • 2015 - 2021This yearChip: 8A315 MHzFCC: HYQ14FBA, HYQ14FLB(US / Canada cars)Page A8 key; HYQ14FLB on 2020-2021 cars
  • from 2022Chip: 8A315 MHzFCC: HYQ14FLC(US / Canada cars)Second-generation NX, page BA key

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the Lexus NX 2017?

12 listings fit the Lexus NX 2017: smart keys, key shells and emergency blades, in 2-, 3- and 4-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.

What frequency does the Lexus NX 2017 remote use?

Listings for the Lexus NX 2017 come in 315 MHz and 433 MHz: the frequency depends on the market the car was sold in, so check it against your original remote before ordering.

Which transponder chip does the Lexus NX 2017 key use?

The listings for this car carry: 8A (H-chip). Check the chip in each listing's specifications.

Which FCC IDs do Lexus NX 2017 remotes carry?

The remotes listed for this car carry FCC ID BC4EK and HYQ14FBA. Match it with the FCC ID printed on your original remote.

Which blade profile does the Lexus NX 2017 key use?

The blades listed for this car: LXP90.

Which tools program a Lexus NX 2017 key?

The tool makers' coverage lists name Advanced Diagnostics Smart Pro, OBDSTAR Key Master G3, Lonsdor K518, Xhorse VVDI Key Tool Max, Xhorse VVDI Key Tool Plus and XTOOL X100 PAD3 / X100 MAX for this car; 6 of them list all keys lost. Check your tool's latest coverage list before the job.