Skip to content

Lexus RX 2004–2006 Key Fob & Car Keys

Keys that fit the 2004–2006 Lexus RX: remote keys and transponder keys, 2 or 3 buttons, 4D-60 or 4D-68 chip. 14 compatible keys, remotes & shells (genuine and aftermarket) available for the 2004 Lexus RX.

Last updated: 15 November 2026

Key specifications for the Lexus RX 2004–2006

Key types
remote keys, transponder keys, key shells, emergency blades and key blanks
Buttons
2- and 3-button
Transponder chip
4D-60 · 4D-68
Blade profile
TOY50
Part numbers
89751-48031

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Lexus parts catalogue, with the specifications on each listing.

A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.

Programming the Lexus RX 2004 key

Key with a blade (regular or flip)

6 tools list this key. 3 of them list all keys lost.

Programming steps

Add key - Lonsdor K518ISE / K518S / K518 Pro

Needs: working master key, new key cut to the car with a 4D-68 chip (TOY48 / TOY50 blank)

  1. Check the customer's key is a master: in the ignition the security light stays off (a valet key lights it for about a second).
  2. Connect the K518 by OBD. Immobilizer > Lexus > select the model (RX330 / RX350 / RX400h) and year > Mechanical key > Add key.
  3. Insert the master key and switch the ignition on.
  4. When asked, insert the new cut key and switch the ignition on and off as the tool prompts.
  5. Wait until the tool reports the key programmed and the security light goes out, then test that it starts.
  6. Remote-head key: program the remote part in the tool's Remote system menu (Type 1 by OBD, Type 2 by the manual sequence the tool shows), then test the buttons.
Watch out: A valet key cannot add keys: you need a master key. Lexus 4D keys of these years are 4D-68: a 4C or G key will not learn.
All keys lost - Lonsdor K518ISE / K518S / K518 Pro

Needs: new keys cut to the car with blank 4D-68 chips, no PIN entry (the tool resets by OBD)

  1. Cut every new key first, with 4D-68 chips, and have them on the bench.
  2. Connect the K518 by OBD. Immobilizer > Lexus > select the model (RX330 / RX350 / RX400h) and year > Mechanical key > All keys lost (immobilizer reset).
  3. Follow the ignition prompts (off, on, off and remove the key, on again) while the tool resets the immobilizer.
  4. Within 120 s register the keys: insert a key, switch on and wait 5 s; repeat for each further key; with only one or two keys, finish by switching the ignition on and off quickly 5 times.
  5. The security light goes out when programming is done. Test every key.
  6. Add further keys later with the normal add-key routine and one of the new master keys.
  7. Remote-head key: program the remote part in the tool's Remote system menu (Type 1 by OBD, Type 2 by the manual sequence the tool shows), then test the buttons.
Watch out: The reset erases every registered key: bring every key the customer will keep and program them in the same session. You have about 120 s after the reset to register the keys. Keep the battery charged and steady during the reset.

Without a tool

Programming steps

Program the remote without a tool(US / Canada cars)

Needs: every remote for the car, the car's key

  1. Start with the key out of the ignition. Unlock and open the driver's door; every other door stays closed.
  2. Within 5 seconds, insert the key without turning it and pull it out, two times.
  3. Within 40 seconds, close and open the driver's door twice, then insert the key and pull it out once.
  4. Within 40 seconds, close and open the driver's door twice, then insert the key and leave it in.
  5. Close the driver's door, turn the ignition to ON and back to OFF without cranking, and take the key out.
  6. Within 3 seconds the locks should lock and unlock by themselves: programming mode. If they do not, start again from step 1 or use the alternate method.
  7. Within 40 seconds, hold LOCK and UNLOCK on the remote together for 1.5 seconds, release, and at once press and hold LOCK alone.
  8. Within 10 seconds the locks lock and unlock once: remote accepted. If they cycle twice, it was not accepted; repeat step 7.
  9. Repeat steps 7 and 8 for each remote, then open the driver's door to finish.
Watch out: Do not crank the engine when turning the ignition ON and OFF.

When the key changed

Smart key (push to start)

  • 2010 - 2015Chip: DST80FCC: HYQ14ACXUS HYQ14ACX 315 MHz; GCC 433 MHz page 98 key
  • 2016 - 2022Chip: 8AFCC: HYQ14FBB, HYQ14FLBUS HYQ14FBB, HYQ14FLB from 2020; GCC 433 MHz BP1EK / BP1EW
  • 2023 - 2025Chip: 8A315 MHzFCC: HYQ14FLC(US / Canada cars)New RX (2023 on) BA type key

Key with a blade (regular or flip)

  • 1999 - 2003Chip: 4CBlade: TOY48RX300 first generation
  • 2004 - 2009This yearChip: 4D-68Blade: TOY48RX330 / RX350 / RX400h remote head key

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the Lexus RX 2004–2006?

14 listings fit the Lexus RX 2004–2006: remote keys, transponder keys, key shells, emergency blades and key blanks, in 2- and 3-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.

Which transponder chip does the Lexus RX 2004–2006 key use?

The listings for this car carry: 4D-60 · 4D-68. Check the chip in each listing's specifications.

Which blade profile does the Lexus RX 2004–2006 key use?

The blades listed for this car: TOY50.

Which tools program a Lexus RX 2004–2006 key?

The tool makers' coverage lists name Lonsdor K518, OBDSTAR Key Master G3, XTOOL X100 PAD3 / X100 MAX, Lonsdor KH100, Xhorse VVDI Key Tool Max and Xhorse VVDI Key Tool Plus for this car; 3 of them list all keys lost. Check your tool's latest coverage list before the job.