Skip to content

Lincoln Continental 2017–2019 Key Fob & Car Keys

Keys that fit the 2017–2019 Lincoln Continental: smart keys and transponder keys, 4 buttons, FCC ID A2C94078900, M3NA2C931426 or M3NA2C94078000, ID49 (HITAG Pro) or PCF7939FA chip, 434 MHz or 902 MHz. 13 compatible keys, remotes & shells (genuine and aftermarket) available for the 2017 Lincoln Continental.

Last updated: 17 November 2026

Key specifications for the Lincoln Continental 2017–2019

Key types
smart keys, transponder keys, key shells, emergency blades and key blanks
Frequency
434 MHz and 902 MHz
Buttons
4-button
Transponder chip
ID49 (HITAG Pro) · PCF7939FA
Blade profile
HU101
Part numbers
HP5T-15K601-DD · 164-R8149 · PCF7939FA

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Lincoln parts catalogue, with the specifications on each listing. The frequency depends on the market the car was sold in, so check 434 MHz and 902 MHz against your original before ordering.

A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.

Programming the Lincoln Continental 2017 key

Smart key (push to start)

One tool lists this key.

  • OBDSTAR Key Master G3
    • Add key
    • All keys lost
    • Remote
    no PIN needed

Programming steps

Add key - on the car(US / Canada cars)

Needs: two programmed intelligent access keys inside the car, the new intelligent access key

  1. Switch the ignition off and close every door. Remove the key blade from the transmitter.
  2. Open the floor console storage lid and put the first programmed key in the backup slot.
  3. Press the push button ignition, wait five seconds and press it again. Remove the key.
  4. Within 10 seconds, put the second programmed key in the backup slot and press the push button ignition.
  5. Wait five seconds, press the push button ignition again and remove the key.
  6. Put the new key in the backup slot (five seconds after removing the second key) and press the push button ignition. Programming is done.
  7. Check that the remote buttons work and the new key starts the car.
Watch out: Ignition off, all doors closed before you start and kept closed throughout. Do all steps within 30 seconds of starting; if a step is out of order, stop and wait at least one minute before starting again. With fewer than two programmed keys, the spare must be programmed with a tool. If it fails, wait 10 seconds and repeat the procedure.
Add key - on the car(US / Canada cars)

Needs: two working Intelligent Access keys, new Intelligent Access key

  1. Remove the key blade from each Intelligent Access key and close all doors; keep them closed through the procedure.
  2. Make sure the vehicle is off; open the floor console storage compartment lid to reach the backup slot.
  3. Put the first working key in the backup slot and press START/STOP; wait five seconds and press START/STOP again.
  4. Remove the key; within 10 seconds put the second working key in the slot and press START/STOP.
  5. Wait five seconds, press START/STOP again and remove the key.
  6. Wait five seconds, put the new key in the backup slot and press START/STOP.
  7. Check the remote buttons and that the new key starts the engine; if it failed, wait 10 seconds and repeat from step 3.
Watch out: Maximum four Intelligent Access keys. Do the whole sequence within about 30 seconds; out of order, wait one minute and restart.

Key type not stated by the list

One tool lists this key.

  • Launch X-431 IMMO
    • Add key
    • All keys lost
    • Remote

Without a tool

The remote is programmed on the car, without a tool.

When the key changed

Smart key (push to start)

  • 2017 - 2020This yearChip: ID49FCC: M3N-A2C94078000902 MHz US fobs; 868 MHz fobs elsewhere: read the label.

Key with a blade (regular or flip)

  • 1998 - 2002Chip: 4C(US / Canada cars)Ninth generation (front-wheel drive); fixed glass chip.

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the Lincoln Continental 2017–2019?

13 listings fit the Lincoln Continental 2017–2019: smart keys, transponder keys, key shells, emergency blades and key blanks, in 4-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.

What frequency does the Lincoln Continental 2017–2019 remote use?

Listings for the Lincoln Continental 2017–2019 come in 434 MHz and 902 MHz: the frequency depends on the market the car was sold in, so check it against your original remote before ordering.

Which transponder chip does the Lincoln Continental 2017–2019 key use?

The listings for this car carry: ID49 (HITAG Pro) · PCF7939FA. Check the chip in each listing's specifications.

Which FCC IDs do Lincoln Continental 2017–2019 remotes carry?

The remotes listed for this car carry FCC ID A2C94078900, M3NA2C931426 and M3NA2C94078000. Match it with the FCC ID printed on your original remote.

Which blade profile does the Lincoln Continental 2017–2019 key use?

The blades listed for this car: HU101.

Which tools program a Lincoln Continental 2017–2019 key?

The tool makers' coverage lists name OBDSTAR Key Master G3 and Launch X-431 IMMO for this car; 2 of them list all keys lost. Check your tool's latest coverage list before the job.

Can the Lincoln Continental 2017–2019 remote be programmed without a tool?

The remote is programmed on the car, without a tool.