Lincoln LS 2002 Key Fob & Car Keys
2 compatible keys, remotes & shells (genuine and aftermarket) available for the 2002 Lincoln LS.
Last updated: 3 November 2026
Key specifications for the Lincoln LS 2002
- Transponder chip
- 4D-60
To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Lincoln parts catalogue, with the specifications on each listing.
Shells and blades reuse the original electronics, and a blade needs cutting by a locksmith. We ship worldwide from the UAE by DHL and FedEx.
Programming the Lincoln LS 2002 key
Key with a blade (regular or flip)
One tool lists this key.
- OBDSTAR Key Master G3
- Add key
- All keys lost
- Remote
no PIN needed
Programming steps
Add key - on the car(US / Canada cars)
Needs: two original Ford keys that start the car, a new key already cut to the car
- Put the first working key in the ignition, turn to ON (just before cranking) for at least one second, then back to OFF.
- Take it out. Within 10 seconds put the second working key in, turn to ON for at least one second and no more than 10 seconds, then OFF, and take it out.
- Within 20 seconds, put the new key in, turn to ON for at least one second, then back to OFF.
- The security light comes on for 3 seconds: the new key is programmed.
Add key - OBDSTAR Key Master G3 / Key Master 5(US / Canada cars)
Needs: new transponder key cut to the vehicle, battery maintainer
- Connect the tool to the OBD port and a battery maintainer; select IMMO > Ford / Lincoln > the model, years and key type.
- Read the key count first and note it.
- Put the new key in the ignition, switch ON and choose Add key.
- Let the tool get security access: a timed wait of about 10 minutes; keep the ignition ON and do not interrupt it.
- When the tool reports the key is programmed, leave the new key at ON for about 20 seconds, then switch OFF.
- Read the key count again, then start the engine with the new key and with an old key.
All keys lost - OBDSTAR Key Master G3 / Key Master 5(US / Canada cars)
Needs: two new transponder keys cut to the vehicle, battery maintainer
- Cut two new keys; the car will not start with fewer than two learned keys.
- Connect the tool to the OBD port and a battery maintainer; select IMMO > Ford / Lincoln > the model, years and key type.
- Put the first new key in the ignition, switch ON and choose All keys lost (erase keys and program).
- Let the tool get security access: a timed wait of about 10 minutes; do not switch off.
- Let the tool erase all stored keys; follow its prompts to switch OFF and back ON so the first key is learned.
- When asked, insert the second new key and switch ON for about 10 seconds.
- Confirm the tool reports two keys, then start the engine with both keys.
When the key changed
Key with a blade (regular or flip)
- 2000 - 2002This yearChip: 4D-60Blade: H75(US / Canada cars)Large glass 4D-60 chip; separate remote.
- 2003 - 2006Chip: 4D-63Blade: H75(US / Canada cars)40-bit version; an 80-bit key also programs.
Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.
Frequently asked questions
Which transponder chip does the Lincoln LS 2002 key use?
The listings for this car carry: 4D-60. Check the chip in each listing's specifications.
Which tools program a Lincoln LS 2002 key?
The tool makers' coverage lists name OBDSTAR Key Master G3 for this car; 1 of them lists all keys lost. Check your tool's latest coverage list before the job.

