Skip to content

Lincoln MKX 2017 Key Fob & Car Keys

Keys that fit the 2017 Lincoln MKX: smart keys and transponder keys, 4 or 5 buttons, FCC ID M3N5WY8609, M3NA2C31243300 or M3NA2C94078000, ID46 (HITAG 2) or ID49 (HITAG Pro) chip, 315 MHz or 868 MHz. 18 compatible keys, remotes & shells (genuine and aftermarket) available for the 2017 Lincoln MKX.

Last updated: 17 November 2026

Key specifications for the Lincoln MKX 2017

Key types
smart keys, transponder keys, key shells, emergency blades and key blanks
Frequency
315 MHz and 868 MHz
Buttons
4- and 5-button
Transponder chip
ID46 (HITAG 2) · ID49 (HITAG Pro) · PCF7939FA
Blade profile
HU101
Part numbers
HP5T-15K601-CF · PCF7939FA
Battery
CR2032

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Lincoln parts catalogue, with the specifications on each listing. The frequency depends on the market the car was sold in, so check 315 MHz and 868 MHz against your original before ordering.

A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.

Programming the Lincoln MKX 2017 key

Smart key (push to start)

One tool lists this key.

  • OBDSTAR Key Master G3
    • Add key
    • All keys lost
    • Remote
    no PIN needed

Programming steps

Add key - on the car(US / Canada cars)

Needs: two working programmed intelligent access keys inside the car, the new intelligent access key

  1. Close all doors and keep them closed. Switch the ignition off.
  2. Open the floor console storage lid and place the first working key in the backup slot, buttons toward the rear of the car and key ring up.
  3. Press the push button ignition switch, wait 5 seconds, then press it again.
  4. Take that key out. Within 10 seconds, seat the second working key in the backup slot and push the start button.
  5. Wait 5 seconds, press the push button ignition switch again, then remove the key.
  6. After 5 seconds, seat the new key in the backup slot and push the start button.
Watch out: A maximum of 4 intelligent access keys can be stored. Finish all steps within 30 seconds of starting. If a step is done out of order, stop and wait at least 1 minute before starting again. With only one working key or none, this method does not work: the key needs a tool. If programming fails, wait 10 seconds and start again.
Add key - on the car(US / Canada cars)

Needs: two working Intelligent Access keys, new Intelligent Access key

  1. Make sure the vehicle is off; open the floor console storage compartment to find the backup slot (key ring up, buttons facing the rear).
  2. Put the first working key in the backup slot and press START/STOP; wait five seconds and press START/STOP again.
  3. Remove the key; within 10 seconds put the second working key in the slot and press START/STOP.
  4. Wait five seconds, press START/STOP again and remove the key.
  5. Wait five seconds, then put the new key in the backup slot and press START/STOP.
  6. Check the remote buttons and that the new key starts the engine; if it failed, wait 10 seconds and repeat from step 2.
Watch out: Maximum four Intelligent Access keys. Do the whole sequence within about 30 seconds; out of order, wait one minute and restart.

Key type not stated by the list

One tool lists this key.

  • Launch X-431 IMMO
    • Add key
    • All keys lost

Without a tool

The remote is programmed on the car, without a tool. It takes two working keys. Up to 4 remotes.

When the key changed

Smart key (push to start)

  • 2011 - 2015Chip: ID46315 MHzFCC: M3N5WY8609(US / Canada cars)Push-to-start (Intelligent Access).
  • 2016 - 2018This yearChip: ID49FCC: M3N-A2C31243300, M3N-A2C94078000902 MHz US fobs; 868 MHz fobs elsewhere: read the label.

Key with a blade (regular or flip)

  • 2007 - 2010Chip: 4D-63Blade: H75(US / Canada cars)40-bit version; remote head key (IKT).

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the Lincoln MKX 2017?

18 listings fit the Lincoln MKX 2017: smart keys, transponder keys, key shells, emergency blades and key blanks, in 4- and 5-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.

What frequency does the Lincoln MKX 2017 remote use?

Listings for the Lincoln MKX 2017 come in 315 MHz and 868 MHz: the frequency depends on the market the car was sold in, so check it against your original remote before ordering.

Which transponder chip does the Lincoln MKX 2017 key use?

The listings for this car carry: ID46 (HITAG 2) · ID49 (HITAG Pro) · PCF7939FA. Check the chip in each listing's specifications.

Which FCC IDs do Lincoln MKX 2017 remotes carry?

The remotes listed for this car carry FCC ID M3N5WY8609, M3NA2C31243300 and M3NA2C94078000. Match it with the FCC ID printed on your original remote.

Which blade profile does the Lincoln MKX 2017 key use?

The blades listed for this car: HU101.

Which tools program a Lincoln MKX 2017 key?

The tool makers' coverage lists name OBDSTAR Key Master G3 and Launch X-431 IMMO for this car; 2 of them list all keys lost. Check your tool's latest coverage list before the job.

Can the Lincoln MKX 2017 remote be programmed without a tool?

The remote is programmed on the car, without a tool. It takes two working keys. Up to 4 remotes.