Lincoln Navigator 2018–2019 Key Fob & Car Keys
Keys that fit the 2018–2019 Lincoln Navigator: smart keys and transponder keys, 4 buttons, FCC ID M3N5WY8609, ID46 (HITAG 2) or ID49 (HITAG Pro) chip, 315 MHz. 8 compatible keys, remotes & shells (genuine and aftermarket) available for the 2018 Lincoln Navigator.
Last updated: 18 November 2026
Key specifications for the Lincoln Navigator 2018–2019
- Key types
- smart keys, transponder keys, key shells and key blanks
- Frequency
- 315 MHz
- Buttons
- 4-button
- Transponder chip
- ID46 (HITAG 2) · ID49 (HITAG Pro) · PCF7939FA
- Blade profile
- HU101
- Part numbers
- PCF7939FA
- Battery
- CR2032
- Compatible FCC IDs
To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Lincoln parts catalogue, with the specifications on each listing. Every remote listed for the Lincoln Navigator 2018–2019 transmits on 315 MHz.
A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.
- $22.47In Stock
- $2.53In Stock
- $3.36In Stock
- $21.07In Stock
Programming the Lincoln Navigator 2018 key
Smart key (push to start)
One tool lists this key.
- OBDSTAR Key Master G3
- Add key
- All keys lost
- Remote
no PIN needed
Programming steps
Add key - on the car(US / Canada cars)
Needs: two working programmed intelligent access keys inside the car, the new intelligent access key
- Remove the key blade from the remote fob.
- Close all doors and keep them closed. Switch the ignition off.
- Open the center console lid and insert the first working key in the backup slot.
- Press the push button ignition switch, wait 5 seconds, then press it again.
- Take that key out. Within 10 seconds, seat the second working key in the backup slot and push the start button.
- Wait 5 seconds, press the push button ignition switch again, then remove the key.
- After 5 seconds, seat the new key in the backup slot and push the start button.
- The cluster shows a message confirming the key is programmed, the turn signals flash and the horn sounds. Check the remote buttons work and the car starts with the new key.
Add key - on the car(US / Canada cars)
Needs: two working Intelligent Access keys, new Intelligent Access key
- Make sure the vehicle is off; take the key blade out of each fob and open the center console lid to find the backup slot.
- Put the first working key in the backup slot and press START/STOP; wait five seconds and press START/STOP again.
- Remove the key; within 10 seconds put the second working key in the slot and press START/STOP.
- Wait five seconds, press START/STOP again and remove the key.
- Wait five seconds, then put the new key in the backup slot and press START/STOP.
- Check: the cluster confirms the new key, the turn signals flash and the horn sounds; test the remote and start the engine. If it failed, wait 10 seconds and repeat from step 2.
Key type not stated by the list
One tool lists this key.
- Launch X-431 IMMO
- Add key
- All keys lost
- Remote
Without a tool
The remote is programmed on the car, without a tool.
When the key changed
Smart key (push to start)
- 2015 - 2017Chip: ID46315 MHzFCC: M3N5WY8609(US / Canada cars)Push-to-start trims.
- from 2018This yearChip: ID49FCC: M3N-A2C940780902 MHz US fobs; 868 MHz fobs elsewhere: read the label.
Key with a blade (regular or flip)
- 1997 - 2002Chip: 4CBlade: H75(US / Canada cars)First model year 1998; 2002 is a split year.
- 2003 - 2017Chip: 4D-63Blade: H75FCC: CWTWB1U793, OUCD6000022(US / Canada cars)40-bit early, 80-bit from about 2010; an 80-bit key fits both.
Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.
Frequently asked questions
Which keys fit the Lincoln Navigator 2018–2019?
8 listings fit the Lincoln Navigator 2018–2019: smart keys, transponder keys, key shells and key blanks, in 4-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.
What frequency does the Lincoln Navigator 2018–2019 remote use?
Every remote listed for the Lincoln Navigator 2018–2019 transmits on 315 MHz.
Which transponder chip does the Lincoln Navigator 2018–2019 key use?
The listings for this car carry: ID46 (HITAG 2) · ID49 (HITAG Pro) · PCF7939FA. Check the chip in each listing's specifications.
Which FCC IDs do Lincoln Navigator 2018–2019 remotes carry?
The remotes listed for this car carry FCC ID M3N5WY8609. Match it with the FCC ID printed on your original remote.
Which blade profile does the Lincoln Navigator 2018–2019 key use?
The blades listed for this car: HU101.
Which tools program a Lincoln Navigator 2018–2019 key?
The tool makers' coverage lists name OBDSTAR Key Master G3 and Launch X-431 IMMO for this car; 2 of them list all keys lost. Check your tool's latest coverage list before the job.
Can the Lincoln Navigator 2018–2019 remote be programmed without a tool?
The remote is programmed on the car, without a tool.







