SKU: B06841
Mazda 2 2012–2013 Key Fob & Car Keys
Keys that fit the 2012–2013 Mazda 2: smart keys, flip keys and remote keys, 2 or 3 buttons, FCC ID BGBX1T478SKE12501 or CNP259, 4D-63 chip. 7 compatible keys, remotes & shells (genuine and aftermarket) available for the 2012 Mazda 2.
Last updated: 12 November 2026
Key specifications for the Mazda 2 2012–2013
- Key types
- smart keys, flip keys, remote keys, transponder keys, key shells, emergency blades and key blanks
- Buttons
- 2- and 3-button
- Transponder chip
- 4D-63
- Blade profile
- MZ24
- Battery
- CR2025
- Compatible FCC IDs
To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Mazda parts catalogue, with the specifications on each listing.
A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.
- 4D-63 40-Bit Carbon Transponder Chip for Ford Lincoln Mazda 2001-2015 - Aftermarket Blank Chip$1.97In Stock
- $2.81In Stock
- $2.81In Stock
- $1.03In Stock
- Super NXP Killer CNP259 Smart Key Clone Tool - NXP NCF29XX Read Write Reset, Unlimited Use
SKU: B02207
$74.44In Stock
Programming the Mazda 2 2012 key
Key with a blade (regular or flip)
Programming steps
Add key - on the car(US / Canada cars)
Needs: Flip key, key part (transponder), two original working keys that start the car, the new key, already cut to the car
- Insert the first working key and turn the ignition ON without cranking. Keep it ON about 3 seconds, until the security light goes out.
- Turn the ignition OFF and remove the key.
- Within 10 seconds, insert the second working key and turn ON for at least 3 seconds, until the security light goes out. Turn OFF and remove it.
- Within 20 seconds, insert the new key and turn ON for at least 3 seconds, then turn OFF.
- The security light comes on for 3 seconds to confirm the new key is programmed.
Add key - on the car(US / Canada cars)
Needs: two working original keys (not cloned copies), new key already cut, with 4D63 transponder
- Insert the first working key and turn it ON; wait about 3 seconds until the security light goes out, then turn OFF and remove it.
- Within 5 to 10 seconds insert the second working key, turn ON for about 3 seconds, then OFF and remove it.
- Within 20 seconds insert the new key and turn it ON for at least 3 seconds.
- The security light comes on for about 3 seconds and goes out when the key is learned; a flashing light means it failed (wait a minute and repeat).
- Repeat step 3 for any other new key, then start the car with every key.
Without a tool
The remote is programmed on the car, without a tool.
Programming steps
Program the remote without a tool(US / Canada cars)
Needs: working ignition key, every remote to be used (up to 3)
- Take the key out, close all doors, then open the driver's door and leave it open.
- Within 24 seconds: insert the key and turn it ON and back to LOCK three times, leave it in the switch, then close and open the driver's door three times.
- The locks cycle on their own: the car is in programming mode (if not, wait about 40 seconds and start again).
- Press UNLOCK twice on the first remote; the locks cycle to confirm.
- Press a button twice on each further remote, waiting for the locks to cycle each time. With fewer than three remotes, keep pressing the last one twice until the locks have cycled three times in all.
- Remove the key to leave programming mode and test every remote.
When the key changed
Smart key (push to start)
- 2015 - 2021Chip: ID49433 MHz(GCC / Europe cars)Skyactiv smart key (KDY3 / KDY5 part numbers), Hitag Pro
Key with a blade (regular or flip)
- 2003 - 2014This yearChip: 4D-63Read the key: 40-bit or 80-bit 4D-63; US cars 2011-2014
Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.
Frequently asked questions
Which keys fit the Mazda 2 2012–2013?
7 listings fit the Mazda 2 2012–2013: smart keys, flip keys, remote keys, transponder keys, key shells, emergency blades and key blanks, in 2- and 3-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.
Which transponder chip does the Mazda 2 2012–2013 key use?
The listings for this car carry: 4D-63. Check the chip in each listing's specifications.
Which FCC IDs do Mazda 2 2012–2013 remotes carry?
The remotes listed for this car carry FCC ID BGBX1T478SKE12501 and CNP259. Match it with the FCC ID printed on your original remote.
Which blade profile does the Mazda 2 2012–2013 key use?
The blades listed for this car: MZ24.
Can the Mazda 2 2012–2013 remote be programmed without a tool?
The remote is programmed on the car, without a tool.






