Mazda 2 2015 Key Fob & Car Keys
Keys that fit the 2015 Mazda 2: smart keys, flip keys and remote keys, 2 or 3 buttons, FCC ID SKE13E01, BGBX1T478SKE12501 or CNP259, ID49 (HITAG Pro) chip. 6 compatible keys, remotes & shells (genuine and aftermarket) available for the 2015 Mazda 2.
Last updated: 12 November 2026
Key specifications for the Mazda 2 2015
- Key types
- smart keys, flip keys, remote keys, key shells, emergency blades and key blanks
- Buttons
- 2- and 3-button
- Transponder chip
- ID49 (HITAG Pro)
- Blade profile
- MZ24
- Battery
- CR2025
- Compatible FCC IDs
To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Mazda parts catalogue, with the specifications on each listing.
A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.
- Mazda 3 CX-5 2013-2018 Smart Key Zinc Alloy Leather Key Case 2-button - Fits Key KDY5-67-5DY
SKU: B09038
$6.19In Stock - $2.81In Stock
- $2.81In Stock
- Super NXP Killer CNP259 Smart Key Clone Tool - NXP NCF29XX Read Write Reset, Unlimited Use
SKU: B02207
$74.44In Stock - Xhorse XZMZD6EN Mazda 2 3 6 CX-5 CX-8 CX-9 2012-2023 Smart Key PCB Board 3-Button Rewritable
SKU: B08862
$12.64In Stock
Programming the Mazda 2 2015 key
Key with a blade (regular or flip)
Programming steps
Add key - on the car(US / Canada cars)
Needs: two original factory keys that start the car, a new key already cut to the car
- Insert the first working key, turn it to ON without cranking, hold it there at least 1 second, then back to OFF and remove it.
- Within 10 seconds, insert the second working key, turn it to ON for between 1 and 10 seconds, then back to OFF and remove it.
- Within 20 seconds, insert the new key, turn it to ON for at least 1 second, then back to OFF.
- The security light stays on for 3 seconds when the new key has been learned.
Without a tool
The remote is programmed on the car, without a tool.
Programming steps
Program the remote without a tool(US / Canada cars)
Needs: Cars without the Smart Entry System, every remote the customer keeps
- Sit in the car with all doors closed, then open the driver's door and leave it open.
- Inside 24 seconds: insert the key, cycle the ignition ON and OFF three times with the key left in place, then shut and reopen the driver's door three times.
- The doors lock and unlock by themselves: the car is in programming mode. If they do not, start again.
- Press UNLOCK twice on the first remote. The locks cycle to confirm it.
- One remote only: give it a double press of any button, let the locks cycle, then one more double press.
- Two remotes: give the second remote a double press of any button, let the locks cycle, then a second double press on that same remote.
- Three remotes: give the second remote a double press of any button, let the locks cycle, then a double press on the third remote.
- Programming ends there. Close the door and test every remote.
When the key changed
Smart key (push to start)
- 2015 - 2021This yearChip: ID49433 MHz(GCC / Europe cars)Skyactiv smart key (KDY3 / KDY5 part numbers), Hitag Pro
Key with a blade (regular or flip)
- 2003 - 2014Chip: 4D-63Read the key: 40-bit or 80-bit 4D-63; US cars 2011-2014
Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.
Frequently asked questions
Which keys fit the Mazda 2 2015?
6 listings fit the Mazda 2 2015: smart keys, flip keys, remote keys, key shells, emergency blades and key blanks, in 2- and 3-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.
Which transponder chip does the Mazda 2 2015 key use?
The listings for this car carry: ID49 (HITAG Pro). Check the chip in each listing's specifications.
Which FCC IDs do Mazda 2 2015 remotes carry?
The remotes listed for this car carry FCC ID BGBX1T478SKE12501, CNP259 and SKE13E01. Match it with the FCC ID printed on your original remote.
Which blade profile does the Mazda 2 2015 key use?
The blades listed for this car: MZ24.
Can the Mazda 2 2015 remote be programmed without a tool?
The remote is programmed on the car, without a tool.





