SKU: B06841
Mazda 6 2007–2008 Key Fob & Car Keys
Keys that fit the 2007–2008 Mazda 6: flip keys, remote keys and transponder keys, 2 or 3 buttons, FCC ID SKE12601, 4D-63 chip, 433 MHz. 6 compatible keys, remotes & shells (genuine and aftermarket) available for the 2007 Mazda 6.
Last updated: 12 November 2026
Key specifications for the Mazda 6 2007–2008
- Key types
- flip keys, remote keys, transponder keys, key shells, emergency blades and key blanks
- Frequency
- 433 MHz
- Buttons
- 2- and 3-button
- Transponder chip
- 4D-63
- Blade profile
- MZ24 · MAZ13
- Part numbers
- GP9F-67-5RYD · NE85-67-5RYB
- Battery
- CR1620
- Compatible FCC IDs
To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Mazda parts catalogue, with the specifications on each listing. Every remote listed for the Mazda 6 2007–2008 transmits on 433 MHz.
A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.
- 4D-63 40-Bit Carbon Transponder Chip for Ford Lincoln Mazda 2001-2015 - Aftermarket Blank Chip$1.97In Stock
- $1.03In Stock
Programming the Mazda 6 2007 key
Key with a blade (regular or flip)
Programming steps
Add key - on the car
Needs: two working original keys (not cloned copies), new key already cut, with 4D63 transponder
- Insert the first working key and turn it ON; wait about 3 seconds until the security light goes out, then turn OFF and remove it.
- Within 5 to 10 seconds insert the second working key, turn ON for about 3 seconds, then OFF and remove it.
- Within 20 seconds insert the new key and turn it ON for at least 3 seconds.
- The security light comes on for about 3 seconds and goes out when the key is learned; a flashing light means it failed (wait a minute and repeat).
- Repeat step 3 for any other new key, then start the car with every key.
Without a tool
The remote is programmed on the car, without a tool.
Programming steps
Program the remote without a tool(US / Canada cars)
Needs: working ignition key, every remote to be used (up to 3)
- Take the key out, close all doors, then open the driver's door and leave it open.
- Within 24 seconds: insert the key and turn it ON and back to LOCK three times, leave it in the switch, then close and open the driver's door three times.
- The locks cycle on their own: the car is in programming mode (if not, wait about 40 seconds and start again).
- Press UNLOCK twice on the first remote; the locks cycle to confirm.
- Press a button twice on each further remote, waiting for the locks to cycle each time. With fewer than three remotes, keep pressing the last one twice until the locks have cycled three times in all.
- Remove the key to leave programming mode and test every remote.
When the key changed
Smart key (push to start)
- 2009 - 2013Chip: 4D-63315 MHzFCC: KR55WK49383(US / Canada cars)Chip is in the emergency key, not in the fob
- 2014 - 2021Chip: ID49433 MHz(GCC / Europe cars)GHY1-67-5DY type keys
- 2014 - 2021Chip: ID49315 MHzFCC: WAZSKE13D01, WAZSKE13D03(US / Canada cars)WAZSKE13D03 from 2019
Key with a blade (regular or flip)
- 2003 - 2013This yearChip: 4D-63Blade: MAZ24RFlip remote key on later cars; read 40 or 80-bit
Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.
Frequently asked questions
Which keys fit the Mazda 6 2007–2008?
6 listings fit the Mazda 6 2007–2008: flip keys, remote keys, transponder keys, key shells, emergency blades and key blanks, in 2- and 3-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.
What frequency does the Mazda 6 2007–2008 remote use?
Every remote listed for the Mazda 6 2007–2008 transmits on 433 MHz.
Which transponder chip does the Mazda 6 2007–2008 key use?
The listings for this car carry: 4D-63. Check the chip in each listing's specifications.
Which FCC IDs do Mazda 6 2007–2008 remotes carry?
The remotes listed for this car carry FCC ID SKE12601. Match it with the FCC ID printed on your original remote.
Which blade profile does the Mazda 6 2007–2008 key use?
The blades listed for this car: MZ24 · MAZ13.
Can the Mazda 6 2007–2008 remote be programmed without a tool?
The remote is programmed on the car, without a tool.





