Mazda 6 2012 Key Fob & Car Keys
Keys that fit the 2012 Mazda 6: smart keys, flip keys and remote keys, 3 or 4 buttons, FCC ID KR55WK49383, 5WK43403D or BGBX1T478SKE12501, 4D-63 (80-bit) chip, 315 MHz or 433 MHz. 15 compatible keys, remotes & shells (genuine and aftermarket) available for the 2012 Mazda 6.
Last updated: 15 November 2026
Key specifications for the Mazda 6 2012
- Key types
- smart keys, flip keys, remote keys, transponder keys, key shells, emergency blades and key blanks
- Frequency
- 315 MHz and 433 MHz
- Buttons
- 3- and 4-button
- Transponder chip
- 4D-63 (80-bit)
- Blade profile
- MZ24 · MZ27 · MAZ24
- Part numbers
- GSYL-67-5RY · D6Y1-76-2GXB · GSYD-67-5RYA
- Battery
- CR2025 · CR1616
- Compatible FCC IDs
To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Mazda parts catalogue, with the specifications on each listing. The frequency depends on the market the car was sold in, so check 315 MHz and 433 MHz against your original before ordering.
A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.
- $154.49In Stock
- $1.96In Stock
- $1.96In Stock
- $1.96In Stock
- $1.96In Stock
- Mazda 6 2009-2013 Smart Key Zinc Alloy Leather Key Case 3+1-button - Fits Key GSYL-67-5RY
SKU: B09040
$6.19In Stock - $1.40In Stock
- $1.03In Stock
- Xhorse XZMZD6EN Mazda 2 3 6 CX-5 CX-8 CX-9 2012-2023 Smart Key PCB Board 3-Button Rewritable
SKU: B08862
$12.64In Stock - $42.13Out of Stock
- $126.40Out of Stock
Programming the Mazda 6 2012 key
Key with a blade (regular or flip)
Programming steps
Add key - on the car(US / Canada cars)
Needs: Flip key, key part (transponder), two working programmed keys, the new key, cut to turn the ignition
- Insert the first working key and turn ON for at least 1 second, until the red key symbol in the cluster goes out. Remove the key.
- Within 5 seconds, insert the second working key and turn ON for at least 1 second but no more than 5 seconds. Remove it.
- Within 10 seconds, insert the new key and turn the ignition ON.
- Success: the red key symbol comes on and goes out after about 1 second. Failure: the symbol flashes repeatedly; remove the key, wait 1 minute and try again.
Add key - on the car
Needs: two working original keys (not cloned copies), new key already cut, with 4D63 transponder
- Insert the first working key and turn it ON; wait about 3 seconds until the security light goes out, then turn OFF and remove it.
- Within 5 to 10 seconds insert the second working key, turn ON for about 3 seconds, then OFF and remove it.
- Within 20 seconds insert the new key and turn it ON for at least 3 seconds.
- The security light comes on for about 3 seconds and goes out when the key is learned; a flashing light means it failed (wait a minute and repeat).
- Repeat step 3 for any other new key, then start the car with every key.
Without a tool
The remote is programmed on the car, without a tool.
Programming steps
Program the remote without a tool(US / Canada cars)
Needs: Flip key, remote part, every remote to be programmed
- Remove the key from the ignition, close all doors, then open the driver's door.
- Within 24 seconds, turn the ignition ON and back to LOCK 3 times, then close and open the driver's door 3 times.
- The locks lock and unlock by themselves to confirm programming mode. If they do not, wait 40 seconds and start again from step 1.
- Press UNLOCK twice on each remote to be programmed. The locks lock and unlock after each remote.
- If the locks do not respond, close and open the driver's door once: the locks should lock and unlock twice. If they still do not, start the procedure again.
- Get out of the car and test every remote.
When the key changed
Smart key (push to start)
- 2009 - 2013This yearChip: 4D-63315 MHzFCC: KR55WK49383(US / Canada cars)Chip is in the emergency key, not in the fob
- 2014 - 2021Chip: ID49433 MHz(GCC / Europe cars)GHY1-67-5DY type keys
- 2014 - 2021Chip: ID49315 MHzFCC: WAZSKE13D01, WAZSKE13D03(US / Canada cars)WAZSKE13D03 from 2019
Key with a blade (regular or flip)
- 2003 - 2013This yearChip: 4D-63Blade: MAZ24RFlip remote key on later cars; read 40 or 80-bit
Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.
Frequently asked questions
Which keys fit the Mazda 6 2012?
15 listings fit the Mazda 6 2012: smart keys, flip keys, remote keys, transponder keys, key shells, emergency blades and key blanks, in 3- and 4-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.
What frequency does the Mazda 6 2012 remote use?
Listings for the Mazda 6 2012 come in 315 MHz and 433 MHz: the frequency depends on the market the car was sold in, so check it against your original remote before ordering.
Which transponder chip does the Mazda 6 2012 key use?
The listings for this car carry: 4D-63 (80-bit). Check the chip in each listing's specifications.
Which FCC IDs do Mazda 6 2012 remotes carry?
The remotes listed for this car carry FCC ID 5WK43403D, BGBX1T478SKE12501 and KR55WK49383. Match it with the FCC ID printed on your original remote.
Which blade profile does the Mazda 6 2012 key use?
The blades listed for this car: MZ24 · MZ27 · MAZ24.
Can the Mazda 6 2012 remote be programmed without a tool?
The remote is programmed on the car, without a tool.














