Skip to content

Mazda MPV 2001 Key Fob & Car Keys

Keys that fit the 2000–2001 Mazda MPV: smart keys and remote keys, 3 buttons, FCC ID E4EG8D320AA, 314 MHz. 1 compatible key, remote & shell (genuine and aftermarket) available for the 2001 Mazda MPV.

Last updated: 6 November 2026

Key specifications for the Mazda MPV 2000–2001

Key types
smart keys and remote keys
Frequency
314 MHz
Buttons
3-button
Part numbers
LC62-67-5RY
Battery
CR2025
Compatible FCC IDs

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Mazda parts catalogue, with the specifications on each listing. Every remote listed for the Mazda MPV 2000–2001 transmits on 314 MHz.

A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.

Programming the Mazda MPV 2001 key

Key with a blade (regular or flip)

One tool lists this key.

  • OBDSTAR Key Master G3
    • Add key
    • All keys lost
    • Remote
    no PIN needed

Without a tool

The remote is programmed on the car, without a tool.

Programming steps

Program the remote without a tool(US / Canada cars)

Needs: working ignition key, every remote to be used (up to 3)

  1. Take the key out, close all doors, then open the driver's door and leave it open.
  2. Within 24 seconds: insert the key, turn it ON and back OFF three times, then take it out.
  3. Press the door switch (rubber button on the driver's door frame) three times: a chime or a lock cycle shows programming mode (if not, wait about 40 seconds and start again).
  4. Press any button twice on the first remote; a chime or a lock cycle confirms it.
  5. The car takes three remote entries: with one remote, give it the double press two more times; with two remotes, give the second one two double presses.
  6. Press the door frame switch once to leave programming mode: two chimes or two lock cycles confirm. Test every remote.
Watch out: Every remote is learned in the same session and older codes are dropped: bring all the remotes the customer keeps. This programs only the remote part; the transponder still has to be programmed to start the car.

When the key changed

Key with a blade (regular or flip)

  • 2000 - 2001This yearChip: 8CLW MPV; same key as the 2000-2002 626; immobilizer optional on US vans

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the Mazda MPV 2000–2001?

1 listing fit the Mazda MPV 2000–2001: smart keys and remote keys, in 3-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.

What frequency does the Mazda MPV 2000–2001 remote use?

Every remote listed for the Mazda MPV 2000–2001 transmits on 314 MHz.

Which FCC IDs do Mazda MPV 2000–2001 remotes carry?

The remotes listed for this car carry FCC ID E4EG8D320AA. Match it with the FCC ID printed on your original remote.

Which tools program a Mazda MPV 2000–2001 key?

The tool makers' coverage lists name OBDSTAR Key Master G3 for this car; 1 of them lists all keys lost. Check your tool's latest coverage list before the job.

Can the Mazda MPV 2000–2001 remote be programmed without a tool?

The remote is programmed on the car, without a tool.