Mazda MX-5 2014 Key Fob & Car Keys
Keys that fit the 2014 Mazda MX-5: flip keys, remote keys and transponder keys, 4 buttons, FCC ID BGBX1T478SKE12501, 4D-63 (80-bit) chip, 315 MHz. 7 compatible keys, remotes & shells (genuine and aftermarket) available for the 2014 Mazda MX-5.
Last updated: 12 November 2026
Key specifications for the Mazda MX-5 2014
- Key types
- flip keys, remote keys, transponder keys, key shells, emergency blades and key blanks
- Frequency
- 315 MHz
- Buttons
- 4-button
- Transponder chip
- 4D-63 (80-bit)
- Blade profile
- MZ24 · MZ27 · MAZ24
- Part numbers
- D6Y1-76-2GXB
- Battery
- CR1616
- Compatible FCC IDs
To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Mazda parts catalogue, with the specifications on each listing. Every remote listed for the Mazda MX-5 2014 transmits on 315 MHz.
A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.
- $1.40In Stock
- $1.03In Stock
- $42.13Out of Stock
Programming the Mazda MX-5 2014 key
Smart key (push to start)
3 tools list this key. 3 of them list all keys lost.
- OBDSTAR Key Master G3
- Add key
- All keys lost
- Remote
no PIN needed - Add key
- All keys lost
- XTOOL X100 PAD3 / X100 MAX
- Add key
- All keys lost
Key with a blade (regular or flip)
3 tools list this key. 3 of them list all keys lost.
- OBDSTAR Key Master G3
- Add key
- All keys lost
- Remote
no PIN needed - Add key
- All keys lost
- XTOOL X100 PAD3 / X100 MAX
- Add key
- All keys lost
Programming steps
Add key - on the car(US / Canada cars)
Needs: Key part of the flip key (transponder), two working programmed keys, the new key with its blade cut to turn the ignition
- Put the first working key in and turn to ON for at least 1 second, until the red key light on the cluster goes off, then pull it out.
- Within 5 seconds put the second working key in, turn to ON for 1 to 5 seconds, then pull it out.
- Within 10 seconds put the new key in and turn to ON.
- Success: the red key light comes on, then goes off after about 1 second.
- Failure: the red key light keeps flashing (key not accepted). Pull the key, wait 1 minute and start again from step 1.
Key type not stated by the list
One tool lists this key.
- Launch X-431 IMMO
- All keys lost
Without a tool
The remote is programmed on the car, without a tool.
Programming steps
Program the remote without a tool(US / Canada cars)
Needs: Remote part of the flip key, every remote the customer keeps, a key that turns the ignition
- Take the key out of the ignition, close every door, then open the driver's door.
- Do the next two steps within 24 seconds in total.
- Turn the ignition from LOCK to ON and back to LOCK three times.
- Shut and reopen the driver's door three times. The locks cycle by themselves. No cycle: wait 40 seconds and start over from step 1.
- On each remote to store, press UNLOCK twice. The locks cycle after each remote is stored.
- No lock cycle after a remote: shut and reopen the driver's door once; the locks should cycle twice. Still nothing: start again from opening the driver's door (step 1, doors closed first).
- Get out and test every remote.
When the key changed
Smart key (push to start)
- 2006 - 2015This yearChip: 4D-63FCC: BGBX1T458SKE11A01(US / Canada cars)Chip is in the emergency key, not in the fob
- 2016 - 2019Chip: ID49315 MHzFCC: WAZSKE13D01(US / Canada cars)Push start on all ND trims, RF included
- 2020 - 2023Chip: ID49315 MHzFCC: WAZSKE13D03(US / Canada cars)One catalog says Hitag AES; read the key
Key with a blade (regular or flip)
- 2001 - 2005Chip: 8CImmobilizer optional on US cars
- 2006 - 2015This yearChip: 4D-63Blade: MAZ24RFCC: BGBX1T478SKE125-01Flip remote key, 4D-63 80-bit
Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.
Frequently asked questions
Which keys fit the Mazda MX-5 2014?
7 listings fit the Mazda MX-5 2014: flip keys, remote keys, transponder keys, key shells, emergency blades and key blanks, in 4-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.
What frequency does the Mazda MX-5 2014 remote use?
Every remote listed for the Mazda MX-5 2014 transmits on 315 MHz.
Which transponder chip does the Mazda MX-5 2014 key use?
The listings for this car carry: 4D-63 (80-bit). Check the chip in each listing's specifications.
Which FCC IDs do Mazda MX-5 2014 remotes carry?
The remotes listed for this car carry FCC ID BGBX1T478SKE12501. Match it with the FCC ID printed on your original remote.
Which blade profile does the Mazda MX-5 2014 key use?
The blades listed for this car: MZ24 · MZ27 · MAZ24.
Which tools program a Mazda MX-5 2014 key?
The tool makers' coverage lists name OBDSTAR Key Master G3, Lonsdor K518, XTOOL X100 PAD3 / X100 MAX and Launch X-431 IMMO for this car; 4 of them list all keys lost. Check your tool's latest coverage list before the job.
Can the Mazda MX-5 2014 remote be programmed without a tool?
The remote is programmed on the car, without a tool.






