Skip to content

Mazda RX-8 2010 Key Fob & Car Keys

Keys that fit the 2006–2010 Mazda RX-8: smart keys, flip keys and transponder keys, 4 buttons, FCC ID BGBX1T458SKE11A01. 8 compatible keys, remotes & shells (genuine and aftermarket) available for the 2010 Mazda RX-8.

Last updated: 12 November 2026

Key specifications for the Mazda RX-8 2006–2010

Key types
smart keys, flip keys, transponder keys, key shells, emergency blades and key blanks
Buttons
4-button
Blade profile
MZ24 · MZ27
Part numbers
D4Y1-76-2GXA
Compatible FCC IDs

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Mazda parts catalogue, with the specifications on each listing.

A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.

Programming the Mazda RX-8 2010 key

Smart key (push to start)

4 tools list this key. 3 of them list all keys lost.

  • OBDSTAR Key Master G3
    • Add key
    • All keys lost
    • Remote
    no PIN needed
    • Add key(US / Canada cars)
    • All keys lost(non-US cars)
  • XTOOL X100 PAD3 / X100 MAX
    • Add key
    • All keys lost
  • Advanced Diagnostics Smart Pro
    • Add key

All keys lost is listed by OBDSTAR Key Master G3, Lonsdor K518 and XTOOL X100 PAD3 / X100 MAX. Advanced Diagnostics Smart Pro lists add key only.

Key with a blade (regular or flip)

3 tools list this key. 3 of them list all keys lost.

  • OBDSTAR Key Master G3
    • Add key
    • All keys lost
    • Remote
    no PIN needed
    • Add key
    • All keys lost
  • XTOOL X100 PAD3 / X100 MAX
    • Add key
    • All keys lost

Programming steps

Add key - on the car(US / Canada cars)

Needs: two working original keys (not cloned copies), new key already cut, with 4D63 transponder

  1. Insert the first working key and turn it ON; wait about 3 seconds until the security light goes out, then turn OFF and remove it.
  2. Within 5 to 10 seconds insert the second working key, turn ON for about 3 seconds, then OFF and remove it.
  3. Within 20 seconds insert the new key and turn it ON for at least 3 seconds.
  4. The security light comes on for about 3 seconds and goes out when the key is learned; a flashing light means it failed (wait a minute and repeat).
  5. Repeat step 3 for any other new key, then start the car with every key.
Watch out: With only one working key, or none, a tool is needed. Cloned keys do not count as working keys for this procedure. Cars with the smart card (keyless start) cannot add a key this way: use a tool.

Key type not stated by the list

One tool lists this key.

  • Launch X-431 IMMO
    • All keys lost

Without a tool

The remote is programmed on the car, without a tool.

Programming steps

Program the remote without a tool(US / Canada cars)

Needs: Remote part of the flip key, every remote the customer keeps, old ones included, the car key

  1. Take the key out of the ignition and close every door.
  2. Open the driver's door and keep it open.
  3. Do the next two steps within 24 seconds in total.
  4. Cycle the ignition from LOCK to ON and back to LOCK three times.
  5. Shut and reopen the driver's door three times. The locks cycle by themselves to confirm programming mode. No cycle: wait 40 seconds and start over from step 1.
  6. On the first remote, press UNLOCK twice. The locks cycle to show it is stored.
  7. One remote only: press UNLOCK twice on that same remote two more times, letting the locks cycle each time, so it is stored three times in all.
  8. Two remotes: press UNLOCK twice on the second remote, wait for the lock cycle, then do it once more on the second remote (three storings in all).
  9. Three remotes: press UNLOCK twice on the second remote, wait for the lock cycle, then press UNLOCK twice on the third remote and wait for the cycle.
  10. Get out, close the door and test every remote.
Watch out: Every remote that must keep working, old ones included, has to be programmed in this same session. The door and ignition cycles must fit inside 24 seconds; after a failed attempt wait 40 seconds before retrying. The car always takes three storings: with fewer than three remotes, repeat the last remote to make up the count.

When the key changed

Smart key (push to start)

  • 2006 - 2011This yearChip: 4D-63315 MHzFCC: BGBX1T458SKE11A01(US / Canada cars)Card key NFY7-67-5RYB; the chip is in emergency key D4Y1-76-2GXA

Key with a blade (regular or flip)

  • 2004 - 2011This yearChip: 4D-63FCC: KPU4178880-bit 4D-63 flip remote key on cars without the smart card

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the Mazda RX-8 2006–2010?

8 listings fit the Mazda RX-8 2006–2010: smart keys, flip keys, transponder keys, key shells, emergency blades and key blanks, in 4-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.

Which FCC IDs do Mazda RX-8 2006–2010 remotes carry?

The remotes listed for this car carry FCC ID BGBX1T458SKE11A01. Match it with the FCC ID printed on your original remote.

Which blade profile does the Mazda RX-8 2006–2010 key use?

The blades listed for this car: MZ24 · MZ27.

Which tools program a Mazda RX-8 2006–2010 key?

The tool makers' coverage lists name OBDSTAR Key Master G3, Lonsdor K518, XTOOL X100 PAD3 / X100 MAX, Advanced Diagnostics Smart Pro and Launch X-431 IMMO for this car; 4 of them list all keys lost. Check your tool's latest coverage list before the job.

Can the Mazda RX-8 2006–2010 remote be programmed without a tool?

The remote is programmed on the car, without a tool.