Skip to content

Mazda Tribute 2011 Key Fob & Car Keys

Keys that fit the 2007–2011 Mazda Tribute: remote keys and transponder keys, 3 buttons, FCC ID CWTWB1U345 or H92PT. 3 compatible keys, remotes & shells (genuine and aftermarket) available for the 2011 Mazda Tribute.

Last updated: 6 November 2026

Key specifications for the Mazda Tribute 2007–2011

Key types
remote keys, transponder keys, key shells and emergency blades
Buttons
3-button
Compatible FCC IDs

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Mazda parts catalogue, with the specifications on each listing.

A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.

Programming the Mazda Tribute 2011 key

Key with a blade (regular or flip)

3 tools list this key. 2 of them list all keys lost.

  • OBDSTAR Key Master G3
    • Add key
    • All keys lost
    • Remote
    no PIN needed
  • XTOOL X100 PAD3 / X100 MAX
    • Add key
    • All keys lost
    • Add key

All keys lost is listed by OBDSTAR Key Master G3 and XTOOL X100 PAD3 / X100 MAX. Lonsdor K518 lists add key only.

Programming steps

Add key - on the car(US / Canada cars)

Needs: Turned key or remote head key, two working programmed keys, the new key, cut to the car

  1. Insert the first working key and turn the ignition from OFF to ON. Hold it in ON for 3 to 10 seconds.
  2. Turn the ignition OFF and pull the first key out.
  3. After 3 seconds and before 10 seconds have passed, insert the second working key and turn it to ON for 3 to 10 seconds.
  4. Turn the ignition OFF and pull the second key out.
  5. After 3 seconds and before 10 seconds have passed, insert the new key and turn it to ON. Hold it in ON for at least 6 seconds.
  6. Pull the new key out. It must start the engine, and on a remote head key its buttons must lock and unlock the car.
Watch out: Every key change must fall after 3 seconds and within 10 seconds; a missed window means starting over. If the new key does not work, wait 10 seconds and run the whole sequence again. With fewer than two working keys this method cannot be used; the key must be programmed with a tool.
Add key - on the car(US / Canada cars)

Needs: two working keys, new transponder key cut to the vehicle

  1. Cut the new SecuriLock key (or flip / integrated keyhead key) to the vehicle and keep it next to two keys that already start the engine.
  2. Put the first working key in the ignition, switch to ON for 3 to 10 seconds, then switch OFF and pull it out.
  3. Within 10 seconds put the second working key in, switch to ON for 3 to 10 seconds, then OFF and pull it out.
  4. Within 10 seconds put the new key in and switch to ON; leave it on for at least 6 seconds.
  5. Check: the theft light comes on for about 3 seconds and goes out, and the new key starts the engine. A flashing theft light means it was not learned.
  6. For each extra key wait about 20 seconds and start again from step 2.
Watch out: Needs two different keys that already start the car; one key, a copied (cloned) key or no key means tool work. Maximum eight keys on the vehicle. If it fails twice, stop and use a tool instead of repeating.

Key type not stated by the list

One tool lists this key.

  • Launch X-431 IMMO
    • Remote

Without a tool

The remote is programmed on the car, without a tool. Up to 4 remotes.

When the key changed

Key with a blade (regular or flip)

  • 2001 - 2004Chip: 4D-60Blade: H75(US / Canada cars)
  • 2005 - 2011This yearChip: 4D-63Blade: H75(US / Canada cars)2005 can carry either chip, read the key; integrated remote key from 2008

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the Mazda Tribute 2007–2011?

3 listings fit the Mazda Tribute 2007–2011: remote keys, transponder keys, key shells and emergency blades, in 3-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.

Which FCC IDs do Mazda Tribute 2007–2011 remotes carry?

The remotes listed for this car carry FCC ID CWTWB1U345 and H92PT. Match it with the FCC ID printed on your original remote.

Which tools program a Mazda Tribute 2007–2011 key?

The tool makers' coverage lists name OBDSTAR Key Master G3, XTOOL X100 PAD3 / X100 MAX, Lonsdor K518 and Launch X-431 IMMO for this car; 2 of them list all keys lost. Check your tool's latest coverage list before the job.

Can the Mazda Tribute 2007–2011 remote be programmed without a tool?

The remote is programmed on the car, without a tool. Up to 4 remotes.