Skip to content

Mercedes-Benz CL 2010 Key Fob & Car Keys

Keys that fit the 2007–2014 Mercedes-Benz CL: smart keys and remote keys, 2 buttons, 315 MHz. 2 compatible keys, remotes & shells (genuine and aftermarket) available for the 2010 Mercedes-Benz CL.

Last updated: 18 November 2026

Key specifications for the Mercedes-Benz CL 2007–2014

Key types
smart keys, remote keys and emergency blades
Frequency
315 MHz
Buttons
2-button

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Mercedes-Benz parts catalogue, with the specifications on each listing. Every remote listed for the Mercedes-Benz CL 2007–2014 transmits on 315 MHz.

A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.

Programming the Mercedes-Benz CL 2010 key

Smart key (push to start)

3 tools list this key. 1 of them list all keys lost.

All keys lost is listed by Xhorse VVDI MB Tool. Xhorse VVDI Key Tool Max and Xhorse VVDI Key Tool Plus list add key only.

Programming steps

Add key - Xhorse VVDI MB Tool

Needs: working key, blank BE / NEC infrared key, internet connection

  1. Connect VVDI MB to the OBD port (or to the EIS with the IR adapter on the bench for K-line EIS) and read the EIS data; save it.
  2. Put the working key in the VVDI MB infrared reader and identify it. A BE-version key gives its password directly by infrared, with no calculation.
  3. Otherwise open Password Calculation, working-key mode, select the chassis group and run Data Acquisition, inserting the working key in the EIS when told (do not switch the ignition on unless asked).
  4. Upload the data, wait for the server result, paste the key password into the EIS data and save the file again.
  5. Open Prepare Key File, load the EIS file with password and generate the file for a free key position.
  6. Put the blank key in the infrared reader, load the key file and write it.
  7. Insert the new key in the EIS so it learns the key, read the EIS again to confirm the position now shows as used, then test start and remote.
Watch out: Keep the battery voltage up during data acquisition. A position already used by a lost key can be disabled from EIS Tools once the new key works.
All keys lost - Xhorse VVDI MB Tool

Needs: blank BE / NEC infrared key, internet connection, calculation tokens, EEPROM programmer for some older EIS

  1. Read the EIS data by OBD (or on the bench with the infrared adapter) and save it.
  2. Open Password Calculation, tick the box for all keys lost, choose the W216 chassis group and start Data Acquisition; follow the prompts.
  3. Upload the data, wait for the server result and paste the key password into the EIS data; save the file again.
  4. Open Prepare Key File, load the EIS file with password and generate the file for a free key position.
  5. Put the blank key in the infrared reader, load the key file and write it.
  6. Insert the new key in the EIS so it learns the key, then test start and remote.
Watch out: Keep the voltage stable through data acquisition. Do not renew or replace the EIS unless the job needs it; a renewed EIS also needs the steering lock (ELV / ESL) adapted.

Key with a blade (regular or flip)

One tool lists this key.

  • Advanced Diagnostics Smart Pro
    • Add key
    • All keys lost
    online calculation
    Needs: AD ADC2000 cable

Key type not stated by the list

3 tools list this key. 2 of them list all keys lost.

  • Launch X-431 IMMO
    • Add key
    • All keys lost
    PIN read function
  • OBDSTAR Key Master G3
    • Add key
    • All keys lost
    reads the PIN by OBD
  • XTOOL X100 PAD3 / X100 MAX
    • Add key
    reads the PIN by OBD

All keys lost is listed by Launch X-431 IMMO and OBDSTAR Key Master G3. XTOOL X100 PAD3 / X100 MAX lists add key only.

When the key changed

Smart key (push to start)

  • 1999 - 2006Chip: Infrared (FBS3)C215, infrared key in the EIS; US model years 2000-2006
  • 2007 - 2013This yearChip: Infrared (FBS3)C216; late builds may be FBS4, read the EIS first

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the Mercedes-Benz CL 2007–2014?

2 listings fit the Mercedes-Benz CL 2007–2014: smart keys, remote keys and emergency blades, in 2-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.

What frequency does the Mercedes-Benz CL 2007–2014 remote use?

Every remote listed for the Mercedes-Benz CL 2007–2014 transmits on 315 MHz.

Which tools program a Mercedes-Benz CL 2007–2014 key?

The tool makers' coverage lists name Xhorse VVDI MB Tool, Xhorse VVDI Key Tool Max, Xhorse VVDI Key Tool Plus, Advanced Diagnostics Smart Pro, Launch X-431 IMMO and OBDSTAR Key Master G3 for this car; 4 of them list all keys lost. Check your tool's latest coverage list before the job.