Skip to content

Mercedes-Benz G-class 2008 Key Fob & Car Keys

3 compatible keys, remotes & shells (genuine and aftermarket) available for the 2008 Mercedes-Benz G-class.

Last updated: 18 November 2026

Key specifications for the Mercedes-Benz G-class 2006–2008

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Mercedes-Benz parts catalogue, with the specifications on each listing.

Shells and blades reuse the original electronics, and a blade needs cutting by a locksmith. We ship worldwide from the UAE by DHL and FedEx.

Programming the Mercedes-Benz G-class 2008 key

Smart key (push to start)

3 tools list this key. 3 of them list all keys lost.

Programming steps

Add key - Autel MaxiIM IM608 / IM508S + XP400 Pro

Needs: working key, blank BE / NEC infrared key matching the car, internet connection (online password calculation)

  1. Connect the tablet to the OBD port and the XP400 Pro by USB; open IMMO, Mercedes-Benz and let the tool identify the EIS (W463).
  2. Read the EIS data and save the file before anything else.
  3. Choose Add key, then hold the working key at the XP400 Pro so the tool detects its frequency.
  4. Run the password calculation with the working key: insert and remove it in the EIS when asked, then put it in the XP400 Pro infrared slot so the tool collects data. The server works out the key password (allow 10 to 30 minutes).
  5. Generate the key file for an unused key position.
  6. Put the blank key in the XP400 Pro infrared slot and write the key file.
  7. Insert the new key in the EIS: the red LED on the key lights and goes out when the EIS has learned it. If it stays lit, take the key out and put it back a few times.
  8. Test start and remote lock / unlock with the new key and the old keys.
Watch out: Power the car from a battery support unit; the data collection keeps the ignition on for a long time. Use a key version that matches the EIS (BE or NEC type); the tool shows the key type before writing.
Add key - Xhorse VVDI MB Tool

Needs: working key, blank BE / NEC infrared key, internet connection

  1. Connect VVDI MB to the OBD port (or to the EIS with the IR adapter on the bench for K-line EIS) and read the EIS data; save it.
  2. Put the working key in the VVDI MB infrared reader and identify it. A BE-version key gives its password directly by infrared, with no calculation.
  3. Otherwise open Password Calculation, working-key mode, select the chassis group and run Data Acquisition, inserting the working key in the EIS when told (do not switch the ignition on unless asked).
  4. Upload the data, wait for the server result, paste the key password into the EIS data and save the file again.
  5. Open Prepare Key File, load the EIS file with password and generate the file for a free key position.
  6. Put the blank key in the infrared reader, load the key file and write it.
  7. Insert the new key in the EIS so it learns the key, read the EIS again to confirm the position now shows as used, then test start and remote.
Watch out: Keep the battery voltage up during data acquisition. A position already used by a lost key can be disabled from EIS Tools once the new key works.
All keys lost - Autel MaxiIM IM608 / IM508S + XP400 Pro + G-BOX3

Needs: G-BOX3 adapter, blank BE / NEC infrared key, 12 V power supply, internet connection (online password calculation)

  1. Remove the EIS and connect it on the bench: G-BOX3 to the tablet, 12 V, ground and the signal lead as the wiring diagram shows; XP400 Pro on USB with the infrared adapter.
  2. Open IMMO, Mercedes-Benz, Expert mode, EIS Tools, Read EIS data, infrared, on bench (G-BOX), and select the K-line EIS type the tool identifies.
  3. Put the infrared key simulator in the EIS and read the EIS data; let the tool read the key password by infrared (a few minutes). Save the EIS data.
  4. Open Generate key file, pick an unused key position and the key type (for example V51 half smart key), and save the file.
  5. Put the blank key in the XP400 Pro infrared slot and write the BE key file.
  6. Use Test EIS status and working keys to confirm the EIS now accepts the new key, refit the EIS and test start and remote.
Watch out: Battery support on the car (or a stable 12 V bench supply); a voltage drop during data collection means starting again. Write down which key positions are used before generating the new key.
All keys lost - Xhorse VVDI MB Tool

Needs: blank BE / NEC infrared key, internet connection, calculation tokens, EEPROM programmer for some older EIS

  1. Remove the EIS and connect it to VVDI MB through the infrared adapter on the bench.
  2. Read the EIS data in infrared mode: on the old Motorola K-line EIS the tool reads the key password directly. Save the EIS data.
  3. Open Prepare Key File, load the EIS file with its password and generate the file for a free key position.
  4. Put the blank key in the VVDI MB infrared reader, load the key file and write it.
  5. Refit the EIS, insert the new key so the EIS learns it, then test start and remote.
Watch out: Keep the voltage stable through data acquisition. Do not renew or replace the EIS unless the job needs it; a renewed EIS also needs the steering lock (ELV / ESL) adapted.

Key type not stated by the list

3 tools list this key. 1 of them list all keys lost.

  • Launch X-431 IMMO
    • Add key
    • All keys lost
    PIN read function
  • OBDSTAR Key Master G3
    • Add key
    reads the PIN by OBD
  • XTOOL X100 PAD3 / X100 MAX
    • Add key
    reads the PIN by OBD

All keys lost is listed by Launch X-431 IMMO. OBDSTAR Key Master G3 and XTOOL X100 PAD3 / X100 MAX list add key only.

When the key changed

Smart key (push to start)

  • 2002 - 2014This yearChip: Infrared (FBS3)W463

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which tools program a Mercedes-Benz G-class 2006–2008 key?

The tool makers' coverage lists name Autel IM508S, Autel IM608 II / IM608 Pro II, Xhorse VVDI MB Tool, Launch X-431 IMMO, OBDSTAR Key Master G3 and XTOOL X100 PAD3 / X100 MAX for this car; 4 of them list all keys lost. Check your tool's latest coverage list before the job.