Skip to content

Mercedes-Benz Gl-class 2009 Key Fob & Car Keys

Keys that fit the 2009 Mercedes-Benz Gl-class: smart keys and remote keys, 2, 3 or 4 buttons, FCC ID KR55WK49031, 315 MHz or 433 MHz. 13 compatible keys, remotes & shells (genuine and aftermarket) available for the 2009 Mercedes-Benz Gl-class.

Last updated: 18 November 2026

Key specifications for the Mercedes-Benz Gl-class 2009

Key types
smart keys, remote keys, key shells, emergency blades and key blanks
Frequency
315 MHz and 433 MHz
Buttons
2-, 3- and 4-button
Blade profile
HU64
Part numbers
5WK49031
Battery
CR2025
Compatible FCC IDs

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Mercedes-Benz parts catalogue, with the specifications on each listing. The frequency depends on the market the car was sold in, so check 315 MHz and 433 MHz against your original before ordering.

A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.

Programming the Mercedes-Benz Gl-class 2009 key

Smart key (push to start)

One tool lists this key.

  • Xhorse VVDI MB Tool
    • Add key
    • All keys lost

Programming steps

Add key - Xhorse VVDI MB Tool

Needs: working key, blank BE / NEC infrared key, internet connection

  1. Connect VVDI MB to the OBD port (or to the EIS with the IR adapter on the bench for K-line EIS) and read the EIS data; save it.
  2. Put the working key in the VVDI MB infrared reader and identify it. A BE-version key gives its password directly by infrared, with no calculation.
  3. Otherwise open Password Calculation, working-key mode, select the chassis group and run Data Acquisition, inserting the working key in the EIS when told (do not switch the ignition on unless asked).
  4. Upload the data, wait for the server result, paste the key password into the EIS data and save the file again.
  5. Open Prepare Key File, load the EIS file with password and generate the file for a free key position.
  6. Put the blank key in the infrared reader, load the key file and write it.
  7. Insert the new key in the EIS so it learns the key, read the EIS again to confirm the position now shows as used, then test start and remote.
Watch out: Keep the battery voltage up during data acquisition. A position already used by a lost key can be disabled from EIS Tools once the new key works.
All keys lost - Xhorse VVDI MB Tool

Needs: blank BE / NEC infrared key, internet connection, calculation tokens, EEPROM programmer for some older EIS

  1. Read the EIS data by OBD (or on the bench with the infrared adapter) and save it.
  2. Open Password Calculation, tick the box for all keys lost, choose the chassis group with W164 and start Data Acquisition; follow the prompts. The VVDI MB fast-acquisition power adapter (sold separately) shortens the wait on the W164.
  3. Upload the data, wait for the server result and paste the key password into the EIS data; save the file again.
  4. Open Prepare Key File, load the EIS file with password and generate the file for a free key position.
  5. Put the blank key in the infrared reader, load the key file and write it.
  6. Insert the new key in the EIS so it learns the key, then test start and remote.
Watch out: Keep the voltage stable through data acquisition. Do not renew or replace the EIS unless the job needs it; a renewed EIS also needs the steering lock (ELV / ESL) adapted.

Key with a blade (regular or flip)

One tool lists this key.

  • Advanced Diagnostics Smart Pro
    • Add key

Key type not stated by the list

3 tools list this key. 3 of them list all keys lost.

  • Launch X-431 IMMO
    • Add key
    • All keys lost
    PIN read function
  • OBDSTAR Key Master G3
    • Add key
    • All keys lost
    reads the PIN by OBD
  • XTOOL X100 PAD3 / X100 MAX
    • Add key
    • All keys lost
    reads the PIN by OBD · all keys lost on the bench

When the key changed

Smart key (push to start)

  • 2006 - 2012This yearChip: Infrared (FBS3)X164, infrared key in the EIS; US model years 2007-2012
  • 2013Chip: Infrared (FBS3)X166 built before 07/2013; check the EIS before work
  • 2014 - 2016Chip: FBS4X166 from 07/2013 production (code 803); confirm the system first

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the Mercedes-Benz Gl-class 2009?

13 listings fit the Mercedes-Benz Gl-class 2009: smart keys, remote keys, key shells, emergency blades and key blanks, in 2-, 3- and 4-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.

What frequency does the Mercedes-Benz Gl-class 2009 remote use?

Listings for the Mercedes-Benz Gl-class 2009 come in 315 MHz and 433 MHz: the frequency depends on the market the car was sold in, so check it against your original remote before ordering.

Which FCC IDs do Mercedes-Benz Gl-class 2009 remotes carry?

The remotes listed for this car carry FCC ID KR55WK49031. Match it with the FCC ID printed on your original remote.

Which blade profile does the Mercedes-Benz Gl-class 2009 key use?

The blades listed for this car: HU64.

Which tools program a Mercedes-Benz Gl-class 2009 key?

The tool makers' coverage lists name Xhorse VVDI MB Tool, Advanced Diagnostics Smart Pro, Launch X-431 IMMO, OBDSTAR Key Master G3 and XTOOL X100 PAD3 / X100 MAX for this car; 4 of them list all keys lost. Check your tool's latest coverage list before the job.