SKU: B02060
Mercedes-Benz Sprinter 2018 Key Fob & Car Keys
Keys that fit the 2013–2018 Mercedes-Benz Sprinter: smart keys, 2 buttons, BGA type chip. 9 compatible keys, remotes & shells (genuine and aftermarket) available for the 2018 Mercedes-Benz Sprinter.
Last updated: 13 November 2026
Key specifications for the Mercedes-Benz Sprinter 2013–2018
- Key types
- smart keys, key shells, emergency blades and key blanks
- Buttons
- 2-button
- Transponder chip
- BGA type
- Blade profile
- HU64
To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Mercedes-Benz parts catalogue, with the specifications on each listing.
A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.
- Gold Car VW Crafter Mercedes-Benz Sprinter 2006-2018 Steering Lock (ESL) Emulator - Two-in-One$23.59In Stock
- $1.40In Stock
Programming the Mercedes-Benz Sprinter 2018 key
Smart key (push to start)
3 tools list this key. 1 of them list all keys lost.
- Xhorse VVDI MB Tool
- Add key(non-US cars)
- All keys lost(non-US cars)
- Add key(non-US cars)
Needs: Autel XP400 Pro- Add key(non-US cars)
Needs: Autel XP400 Pro
All keys lost is listed by Xhorse VVDI MB Tool. Autel IM508S and Autel IM608 II / IM608 Pro II list add key only.
Programming steps
Add key - Autel MaxiIM IM608 / IM508S + XP400 Pro(GCC / Europe cars)
Needs: working key, blank BE / NEC infrared key matching the car, internet connection (online password calculation)
- Connect the tablet to the OBD port and the XP400 Pro by USB; open IMMO, Mercedes-Benz and let the tool identify the EIS (W906).
- Read the EIS data and save the file before anything else.
- Choose Add key, then hold the working key at the XP400 Pro so the tool detects its frequency.
- Run the password calculation with the working key: insert and remove it in the EIS when asked, then put it in the XP400 Pro infrared slot so the tool collects data. The server works out the key password (allow 10 to 30 minutes).
- Generate the key file for an unused key position.
- Put the blank key in the XP400 Pro infrared slot and write the key file.
- Insert the new key in the EIS: the red LED on the key lights and goes out when the EIS has learned it. If it stays lit, take the key out and put it back a few times.
- Test start and remote lock / unlock with the new key and the old keys.
Add key - Xhorse VVDI MB Tool(GCC / Europe cars)
Needs: working key, blank BE / NEC infrared key, internet connection
- Connect VVDI MB to the OBD port (or to the EIS with the IR adapter on the bench for K-line EIS) and read the EIS data; save it.
- Put the working key in the VVDI MB infrared reader and identify it. A BE-version key gives its password directly by infrared, with no calculation.
- Otherwise open Password Calculation, working-key mode, select the chassis group and run Data Acquisition, inserting the working key in the EIS when told (do not switch the ignition on unless asked).
- Upload the data, wait for the server result, paste the key password into the EIS data and save the file again.
- Open Prepare Key File, load the EIS file with password and generate the file for a free key position.
- Put the blank key in the infrared reader, load the key file and write it.
- Insert the new key in the EIS so it learns the key, read the EIS again to confirm the position now shows as used, then test start and remote.
All keys lost - Xhorse VVDI MB Tool(GCC / Europe cars)
Needs: blank BE / NEC infrared key, internet connection, calculation tokens, EEPROM programmer for some older EIS
- Read the EIS data by OBD (or on the bench with the infrared adapter) and save it.
- Open Password Calculation, tick the box for all keys lost, choose the W906 chassis group and start Data Acquisition; follow the prompts.
- Upload the data, wait for the server result and paste the key password into the EIS data; save the file again.
- Open Prepare Key File, load the EIS file with password and generate the file for a free key position.
- Put the blank key in the infrared reader, load the key file and write it.
- Insert the new key in the EIS so it learns the key, then test start and remote.
Key with a blade (regular or flip)
One tool lists this key.
- Advanced Diagnostics Smart Pro
- Add key
- All keys lost
online calculationNeeds: AD ADC2000 cable
When the key changed
Smart key (push to start)
- 2006 - 2018This yearChip: Infrared (FBS3)(GCC / Europe cars)W906 (NCV3), infrared key in the EIS
Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.
Frequently asked questions
Which keys fit the Mercedes-Benz Sprinter 2013–2018?
9 listings fit the Mercedes-Benz Sprinter 2013–2018: smart keys, key shells, emergency blades and key blanks, in 2-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.
Which transponder chip does the Mercedes-Benz Sprinter 2013–2018 key use?
The listings for this car carry: BGA type. Check the chip in each listing's specifications.
Which blade profile does the Mercedes-Benz Sprinter 2013–2018 key use?
The blades listed for this car: HU64.
Which tools program a Mercedes-Benz Sprinter 2013–2018 key?
The tool makers' coverage lists name Xhorse VVDI MB Tool, Autel IM508S, Autel IM608 II / IM608 Pro II and Advanced Diagnostics Smart Pro for this car; 2 of them list all keys lost. Check your tool's latest coverage list before the job.








