Skip to content

Mercury Cougar 2000–2002 Key Fob & Car Keys

Keys that fit the 2000–2002 Mercury Cougar: smart keys and remote keys, 4 buttons, FCC ID CWTWB1U345, CWTWB1U311 or CWTWB1U322, 315 MHz. 6 compatible keys, remotes & shells (genuine and aftermarket) available for the 2000 Mercury Cougar.

Last updated: 12 November 2026

Key specifications for the Mercury Cougar 2000–2002

Key types
smart keys, remote keys and key shells
Frequency
315 MHz
Buttons
4-button
Battery
CR2032

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Mercury parts catalogue, with the specifications on each listing. Every remote listed for the Mercury Cougar 2000–2002 transmits on 315 MHz.

A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.

Programming the Mercury Cougar 2000 key

Key with a blade (regular or flip)

Programming steps

Add key - on the car(US / Canada cars)

Needs: two working keys, new transponder key cut to the vehicle

  1. Cut the new key and keep it next to two keys that already start the engine.
  2. Put the first working key in the ignition, switch to ON, then within 5 seconds switch OFF and pull it out.
  3. Within 5 seconds put the second working key in, switch to ON, then within 5 seconds switch OFF and pull it out.
  4. Within 10 seconds put the new key in and switch to ON for at least 1 second.
  5. Check: the theft light comes on for about 3 seconds and goes out, and the new key starts the engine.
  6. If the theft light flashes, the key was not learned: wait 20 seconds and start again from step 2.
Watch out: Needs two different keys that already start the car; one key, a copied (cloned) key or no key means tool work. The Cougar owner's guides allow up to seven keys; Ford's PATS bulletin says eight. Stay at seven. If it fails twice, stop and use a tool instead of repeating.

Without a tool

The remote is programmed on the car, without a tool.

Programming steps

Program the remote without a tool(US / Canada cars)

Needs: every remote to be programmed, a key that turns the ignition

  1. Turn the ignition from OFF to RUN 4 times within 6 seconds.
  2. Turn the ignition OFF. The LED in the clock / trip computer stays lit to confirm programming mode.
  3. Within 20 seconds, press any button on the first remote. The LED flashes 4 times to confirm.
  4. Within 20 seconds, press any button on the second remote.
  5. Turn the ignition to RUN. The LED goes off: programming mode has ended.
Watch out: The 4 OFF to RUN turns must fit within 6 seconds. Each remote has a 20 second window.

When the key changed

Key with a blade (regular or flip)

  • 1999 - 2002This yearChip: 4C(US / Canada cars)Mondeo-based coupe; same key as the European Ford Cougar.

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the Mercury Cougar 2000–2002?

6 listings fit the Mercury Cougar 2000–2002: smart keys, remote keys and key shells, in 4-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.

What frequency does the Mercury Cougar 2000–2002 remote use?

Every remote listed for the Mercury Cougar 2000–2002 transmits on 315 MHz.

Which FCC IDs do Mercury Cougar 2000–2002 remotes carry?

The remotes listed for this car carry FCC ID CWTWB1U311, CWTWB1U322, CWTWB1U331 and CWTWB1U345. Match it with the FCC ID printed on your original remote.

Can the Mercury Cougar 2000–2002 remote be programmed without a tool?

The remote is programmed on the car, without a tool.