Mercury Sable 2000–2005 Key Fob & Car Keys
Keys that fit the 2000–2005 Mercury Sable: smart keys, remote keys and transponder keys, 4 buttons, FCC ID CWTWB1U345, CWTWB1U311 or CWTWB1U322, 315 MHz. 4 compatible keys, remotes & shells (genuine and aftermarket) available for the 2000 Mercury Sable.
Last updated: 12 November 2026
Key specifications for the Mercury Sable 2000–2005
- Key types
- smart keys, remote keys, transponder keys, key shells, emergency blades and key blanks
- Frequency
- 315 MHz
- Buttons
- 4-button
- Battery
- CR2032
- Compatible FCC IDs
To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Mercury parts catalogue, with the specifications on each listing. Every remote listed for the Mercury Sable 2000–2005 transmits on 315 MHz.
A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.
- $5.62In Stock
- $1.40In Stock
- $1.40In Stock
- $15.45Out of Stock
Programming the Mercury Sable 2000 key
Key with a blade (regular or flip)
Programming steps
Add key - on the car(US / Canada cars)
Needs: two working keys, new transponder key cut to the vehicle
- Cut the new SecuriLock key to the vehicle and keep it next to two keys that already start the engine.
- Put the first working key in the ignition, switch to ON for 1 to 10 seconds, then switch OFF and pull it out.
- Within 10 seconds put the second working key in, switch to ON for 1 to 10 seconds, then OFF and pull it out.
- Within 10 seconds put the new key in and switch to ON for 1 to 10 seconds, then switch OFF.
- Check: the theft light comes on for about 3 seconds and goes out, and the new key starts the engine. A flashing theft light means it was not learned.
- For each extra key start again from step 2.
Key type not stated by the list
One tool lists this key.
- Launch X-431 IMMO
- Add key
- All keys lost
- Remote
Without a tool
The remote is programmed on the car, without a tool.
Programming steps
Program the remote without a tool(US / Canada cars)
Needs: every remote to be programmed, in hand, a key that turns the ignition
- Turn the ignition from OFF to RUN 8 times within 10 seconds, ending in RUN. The door locks cycle to show programming mode.
- Within 20 seconds, press any button on the first remote. The locks cycle to confirm it.
- Within 20 seconds, press any button on the second remote. The locks cycle again to confirm it.
- Turn the ignition OFF. The locks cycle one more time to close programming mode.
When the key changed
Key with a blade (regular or flip)
- 1996 - 1999Chip: 4CBlade: H75(US / Canada cars)Transponder was optional on these years.
- 2000 - 2009This yearChip: 4D-63Blade: H75(US / Canada cars)40-bit version. No Sable was built for 2006-2007.
Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.
Frequently asked questions
Which keys fit the Mercury Sable 2000–2005?
4 listings fit the Mercury Sable 2000–2005: smart keys, remote keys, transponder keys, key shells, emergency blades and key blanks, in 4-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.
What frequency does the Mercury Sable 2000–2005 remote use?
Every remote listed for the Mercury Sable 2000–2005 transmits on 315 MHz.
Which FCC IDs do Mercury Sable 2000–2005 remotes carry?
The remotes listed for this car carry FCC ID CWTWB1U311, CWTWB1U322 and CWTWB1U345. Match it with the FCC ID printed on your original remote.
Which tools program a Mercury Sable 2000–2005 key?
The tool makers' coverage lists name Launch X-431 IMMO for this car; 1 of them lists all keys lost. Check your tool's latest coverage list before the job.
Can the Mercury Sable 2000–2005 remote be programmed without a tool?
The remote is programmed on the car, without a tool.



