Skip to content

Mitsubishi Diamante 2001 Key Fob & Car Keys

3 compatible keys, remotes & shells (genuine and aftermarket) available for the 2001 Mitsubishi Diamante.

Last updated: 12 November 2026

Key specifications for the Mitsubishi Diamante 2001

Key types
key blanks
Transponder chip
4D-60

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Mitsubishi parts catalogue, with the specifications on each listing.

Shells and blades reuse the original electronics, and a blade needs cutting by a locksmith. We ship worldwide from the UAE by DHL and FedEx.

Programming the Mitsubishi Diamante 2001 key

Without a tool

The remote is programmed on the car, without a tool.

Programming steps

Program the remote without a tool(US / Canada cars)

Needs: every remote to be programmed, a jumper wire for the data port

  1. Find the data port.
  2. Insert the key and leave the ignition at OFF.
  3. Check that terminals 1 and 4 have metal pins, then bridge terminals 1 and 4 with a jumper wire. Leave it connected until the end.
  4. Within 10 seconds of connecting the wire, turn the ignition to ACC and back to OFF. The locks lock and unlock once: programming mode is on.
  5. Press LOCK on the remote 3 times within 10 seconds. The locks lock and unlock once to confirm.
  6. For a second remote, repeat the LOCK presses within 1 minute. The locks lock and unlock once to confirm.
  7. Disconnect the jumper wire and remove the key.
Watch out: Be sure which terminals are 1 and 4 before bridging them.

When the key changed

Key with a blade (regular or flip)

  • 2000 - 2001This yearChip: 4D-60(US / Canada cars)MIT8 key; 2001 is a split year, read the key
  • 2002 - 2004Chip: 4D-61(US / Canada cars)MIT12 key (Strattec 5907793)

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the Mitsubishi Diamante 2001?

3 listings fit the Mitsubishi Diamante 2001: key blanks. Match the part number or FCC ID printed on your original key with the specifications on each listing.

Which transponder chip does the Mitsubishi Diamante 2001 key use?

The listings for this car carry: 4D-60. Check the chip in each listing's specifications.

Can the Mitsubishi Diamante 2001 remote be programmed without a tool?

The remote is programmed on the car, without a tool.