Skip to content

Mitsubishi Galant 2002 Key Fob & Car Keys

3 compatible keys, remotes & shells (genuine and aftermarket) available for the 2002 Mitsubishi Galant.

Last updated: 12 November 2026

Key specifications for the Mitsubishi Galant 2000–2003

Key types
key blanks
Transponder chip
4D-60

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Mitsubishi parts catalogue, with the specifications on each listing.

Shells and blades reuse the original electronics, and a blade needs cutting by a locksmith. We ship worldwide from the UAE by DHL and FedEx.

Programming the Mitsubishi Galant 2002 key

Key with a blade (regular or flip)

One tool lists this key.

  • OBDSTAR Key Master G3
    • Add key
    • All keys lost
    • Remote

Programming steps

Add key - on the car(US / Canada cars)

Needs: two working keys, new key cut to the lock (4D-61 to 2003, ID46 from 2004)

  1. Cut the new key first; you need two keys that already start the car.
  2. Insert the first working key, switch ON for at least 5 seconds, then OFF and remove it.
  3. Within 7 seconds insert the second working key and switch ON: the immobiliser lamp blinks twice (registration mode).
  4. Switch OFF, remove it, and within 7 seconds insert the new key and switch ON.
  5. The lamp stays on for about 3 seconds when the key is registered; 3 blinks means it failed.
  6. For more keys repeat the last two steps within 30 seconds (up to 8 keys in total).
  7. Leave the ignition ON for over 30 seconds to leave the mode, then start the engine with every key.
Watch out: Needs two keys that already start the car; with one key or none a tool and the PIN are required. A cloned key does not count as a working key here. If a key was lost or stolen, use a tool to clear and re-register every key instead (the lost key stays valid otherwise).

Without a tool

The remote is programmed on the car, without a tool. Up to 4 remotes.

Programming steps

Program the remote without a tool(US / Canada cars)

Needs: working ignition key, a jumper wire for the diagnostic socket, every remote the customer keeps

  1. Close the doors, put the key in the ignition and leave it OFF.
  2. Bridge pin 1 of the diagnostic socket to ground (pin 4) with a jumper wire and leave it connected.
  3. Within 10 seconds press the hazard switch 6 times; the locks cycle to show programming mode.
  4. Press LOCK on the remote once, then twice more within 10 seconds; the locks cycle to confirm.
  5. Within 1 minute repeat the previous step for each other remote, old ones included (max 4).
  6. Remove the jumper to leave programming mode and test every remote.
Watch out: Entering the mode erases all remotes. Remote only: the immobiliser key is programmed separately with a tool.

When the key changed

Key with a blade (regular or flip)

  • 2000 - 2003This yearChip: 4D-61(US / Canada cars)Plain MIT13 key; separate keyless remote
  • 2004 - 2012Chip: ID46FCC: OUCG8D-620M-A(US / Canada cars)MIT16A key to 2007, MIT17 after; remote head key from 2006
  • 2008 - 2012Chip: ID46(GCC / Europe cars)GCC remote head key board G8D-621M-A, 433 MHz

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the Mitsubishi Galant 2000–2003?

3 listings fit the Mitsubishi Galant 2000–2003: key blanks. Match the part number or FCC ID printed on your original key with the specifications on each listing.

Which transponder chip does the Mitsubishi Galant 2000–2003 key use?

The listings for this car carry: 4D-60. Check the chip in each listing's specifications.

Which tools program a Mitsubishi Galant 2000–2003 key?

The tool makers' coverage lists name OBDSTAR Key Master G3 for this car; 1 of them lists all keys lost. Check your tool's latest coverage list before the job.

Can the Mitsubishi Galant 2000–2003 remote be programmed without a tool?

The remote is programmed on the car, without a tool. Up to 4 remotes.