Skip to content

Mitsubishi Lancer 2005 Key Fob & Car Keys

Keys that fit the 2005 Mitsubishi Lancer: flip keys and remote keys, 2 or 3 buttons, 4D-60 chip. 4 compatible keys, remotes & shells (genuine and aftermarket) available for the 2005 Mitsubishi Lancer.

Last updated: 12 November 2026

Key specifications for the Mitsubishi Lancer 2005

Key types
flip keys, remote keys, key shells and key blanks
Buttons
2- and 3-button
Transponder chip
4D-60
Blade profile
MIT11R
Part numbers
6370A480 · 6370A619

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Mitsubishi parts catalogue, with the specifications on each listing.

A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.

Programming the Mitsubishi Lancer 2005 key

Key with a blade (regular or flip)

2 tools list this key. 1 of them list all keys lost.

  • OBDSTAR Key Master G3
    • Add key
    • All keys lost
    • Remote
    • Add key

All keys lost is listed by OBDSTAR Key Master G3. Lonsdor K518 lists add key only.

Without a tool

The remote is programmed on the car, without a tool. Up to 4 remotes.

Programming steps

Program the remote without a tool(US / Canada cars)

Needs: working ignition key, a jumper wire for the diagnostic socket, every remote the customer keeps

  1. Close the doors, put the key in the ignition and leave it OFF.
  2. Bridge pin 1 of the diagnostic socket to ground (pin 4) with a jumper wire and leave it connected.
  3. Within 10 seconds press the hazard switch 6 times; the locks cycle to show programming mode.
  4. Press LOCK on the remote once, then twice more within 10 seconds; the locks cycle to confirm.
  5. Within 1 minute repeat the previous step for each other remote, old ones included (max 4).
  6. Remove the jumper to leave programming mode and test every remote.
Watch out: Entering the mode erases all remotes. Remote only: the immobiliser key is programmed separately with a tool.

When the key changed

Smart key (push to start)

  • 2008 - 2017Chip: ID46433 MHzFCC: G8D-644M-KEY-E(GCC / Europe cars)GCC / Europe Lancer EX F.A.S.T.-key (8637A663)
  • 2008 - 2017Chip: ID46315 MHzFCC: OUC644M-KEY-N(US / Canada cars)F.A.S.T.-key 8637A228 / 8637B885

Key with a blade (regular or flip)

  • 2008 - 2017Chip: ID46315 MHzFCC: OUCG8D-625M-A, OUCJ166N(US / Canada cars)CY Lancer key ignition: MIT17 key or remote head key
  • 2019 - 2023Chip: ID46433 MHzFCC: J166E(GCC / Europe cars)GCC remote head key 6370B943

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the Mitsubishi Lancer 2005?

4 listings fit the Mitsubishi Lancer 2005: flip keys, remote keys, key shells and key blanks, in 2- and 3-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.

Which transponder chip does the Mitsubishi Lancer 2005 key use?

The listings for this car carry: 4D-60. Check the chip in each listing's specifications.

Which blade profile does the Mitsubishi Lancer 2005 key use?

The blades listed for this car: MIT11R.

Which tools program a Mitsubishi Lancer 2005 key?

The tool makers' coverage lists name OBDSTAR Key Master G3 and Lonsdor K518 for this car; 1 of them lists all keys lost. Check your tool's latest coverage list before the job.

Can the Mitsubishi Lancer 2005 remote be programmed without a tool?

The remote is programmed on the car, without a tool. Up to 4 remotes.