Skip to content

Mitsubishi Mirage 2014–2015 Key Fob & Car Keys

Keys that fit the 2014–2015 Mitsubishi Mirage: smart keys and remote keys, 2, 3 or 4 buttons, FCC ID 0UC003M or 0UCG8D625MA, ID46 (HITAG 2) or ID47 (HITAG 3) chip, 315 MHz or 433 MHz. 14 compatible keys, remotes & shells (genuine and aftermarket) available for the 2014 Mitsubishi Mirage.

Last updated: 16 November 2026

Key specifications for the Mitsubishi Mirage 2014–2015

Key types
smart keys, remote keys, key shells, emergency blades and key blanks
Frequency
315 MHz and 433 MHz
Buttons
2-, 3- and 4-button
Transponder chip
ID46 (HITAG 2) · ID47 (HITAG 3) · CN3 cloning chip
Blade profile
MIT3 · MIT11R
Part numbers
8637C286 · 6370A770 · 8637B424
Battery
CR2032
Compatible FCC IDs

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Mitsubishi parts catalogue, with the specifications on each listing. The frequency depends on the market the car was sold in, so check 315 MHz and 433 MHz against your original before ordering.

A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.

Programming the Mitsubishi Mirage 2014 key

Smart key (push to start)

3 tools list this key. 2 of them list all keys lost.

Key with a blade (regular or flip)

2 tools list this key. 1 of them list all keys lost.

  • OBDSTAR Key Master G3
    • Add key
    • All keys lost
    • Remote
    • Add key
    • Remote

All keys lost is listed by OBDSTAR Key Master G3. Lonsdor K518 lists add key only.

Programming steps

Add key - on the car(US / Canada cars)

Needs: two working keys, new key cut to the lock (ID46 remote head key)

  1. Insert the first working key, turn it ON for 5 seconds, then turn to LOCK and remove it.
  2. Within 30 seconds insert the second working key and turn it ON; about 10 seconds later the immobiliser lamp starts to blink.
  3. Turn that key to LOCK and remove it.
  4. Within 30 seconds (and within 20 seconds of the lamp starting to blink) insert the new key and turn it ON: the immobiliser lamp comes on for about 3 seconds and goes off when it is registered.
  5. For another key, repeat the whole sequence from the first step.
  6. Start the engine with every key; program the remote buttons with the on-board remote routine (separate case).
Watch out: Needs two registered keys; with one key or none a tool and the PIN are required. Not for vehicles sold in Canada (the manual says the customer routine is disabled there). Each wait is 30 seconds at most; if the lamp goes off early, start again.

Key type not stated by the list

One tool lists this key.

  • Launch X-431 IMMO
    • Add key
    PIN read function

When the key changed

Smart key (push to start)

  • 2014 - 2024This yearChip: ID47315 MHzFCC: OUC003M, OUCGHR-M013(US / Canada cars)Early 2014 cars may carry the ID46 OUC644M-KEY-N key
  • 2018 - 2021Chip: ID47433 MHzFCC: OUCGHR-M014(GCC / Europe cars)Keyless-go trims in Europe and the Middle East

Key with a blade (regular or flip)

  • 2014 - 2024This yearChip: ID46315 MHzBlade: MIT3FCC: OUCG8D-625M-A, OUCJ166N(US / Canada cars)Remote head key; OUCJ166N from 2015
  • 2016 - 2024Chip: ID46433 MHzBlade: MIT11R(GCC / Europe cars)Export remote head key (Mirage / Attrage / Space Star)

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the Mitsubishi Mirage 2014–2015?

14 listings fit the Mitsubishi Mirage 2014–2015: smart keys, remote keys, key shells, emergency blades and key blanks, in 2-, 3- and 4-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.

What frequency does the Mitsubishi Mirage 2014–2015 remote use?

Listings for the Mitsubishi Mirage 2014–2015 come in 315 MHz and 433 MHz: the frequency depends on the market the car was sold in, so check it against your original remote before ordering.

Which transponder chip does the Mitsubishi Mirage 2014–2015 key use?

The listings for this car carry: ID46 (HITAG 2) · ID47 (HITAG 3) · CN3 cloning chip. Check the chip in each listing's specifications.

Which FCC IDs do Mitsubishi Mirage 2014–2015 remotes carry?

The remotes listed for this car carry FCC ID 0UC003M and 0UCG8D625MA. Match it with the FCC ID printed on your original remote.

Which blade profile does the Mitsubishi Mirage 2014–2015 key use?

The blades listed for this car: MIT3 · MIT11R.

Which tools program a Mitsubishi Mirage 2014–2015 key?

The tool makers' coverage lists name OBDSTAR Key Master G3, Lonsdor K518, Autel KM100 (IKEY universal smart key) and Launch X-431 IMMO for this car; 2 of them list all keys lost. Check your tool's latest coverage list before the job.