Skip to content

Mitsubishi Outlander 2008–2009 Key Fob & Car Keys

Keys that fit the 2008–2009 Mitsubishi Outlander: smart keys and remote keys, 2, 3 or 4 buttons, FCC ID G8D644MKEYE, 0UC003M or 0UCG8D625MA, ID46 (HITAG 2) chip, 315 MHz or 433 MHz. 10 compatible keys, remotes & shells (genuine and aftermarket) available for the 2008 Mitsubishi Outlander.

Last updated: 14 November 2026

Key specifications for the Mitsubishi Outlander 2008–2009

Key types
smart keys, remote keys, key shells, emergency blades and key blanks
Frequency
315 MHz and 433 MHz
Buttons
2-, 3- and 4-button
Transponder chip
ID46 (HITAG 2)
Blade profile
MIT11R · MIT3
Part numbers
8637A662 · 8637A228 · 6370A770 · 8637A316
Battery
CR2032

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Mitsubishi parts catalogue, with the specifications on each listing. The frequency depends on the market the car was sold in, so check 315 MHz and 433 MHz against your original before ordering.

A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.

Programming the Mitsubishi Outlander 2008 key

Smart key (push to start)

5 tools list this key. 1 of them list all keys lost.

All keys lost is listed by OBDSTAR Key Master G3. Lonsdor K518 lists add key only.

Key with a blade (regular or flip)

2 tools list this key. 2 of them list all keys lost.

    • Add key
    • All keys lost
    • Remote
  • OBDSTAR Key Master G3
    • Add key
    • All keys lost
    • Remote

Programming steps

Add key - on the car(US / Canada cars)

Needs: Regular key or remote head key (transponder only), two working programmed keys, the new key, cut to match the working keys

  1. Cut the new key to match the working keys.
  2. Insert the first working key, turn ON without starting for 5 seconds, then turn OFF and remove it.
  3. Insert the second working key and turn ON without starting until the immobilizer light flashes (within 10 seconds). Turn OFF and remove it. If the light goes out, there was an error.
  4. Within 30 seconds of the light flashing, insert the new key and turn ON without starting. The light stays on about 3 seconds when done; turn OFF and remove it.
  5. If the light flashes 3 times instead, start over from the beginning.
  6. Check the car starts with the new key. Repeat all steps for each extra key.
Watch out: On a remote head key this programs the transponder only; the remote part needs a tool. With fewer than two working keys, the key needs a tool.

Key type not stated by the list

One tool lists this key.

  • Launch X-431 IMMO
    • Add key
    • Remote
    PIN read function

Without a tool

The remote is not programmed on the car by hand: it needs a tool or a dealer.

When the key changed

Smart key (push to start)

  • 2007 - 2020This yearChip: ID46315 MHzFCC: OUC644M-KEY-N(US / Canada cars)F.A.S.T.-key; 2007 fob is OUCG8D-640M-KEY-N
  • 2008 - 2015This yearChip: ID46433 MHzFCC: G8D-644M-KEY-E(GCC / Europe cars)GCC / Europe F.A.S.T.-key 8637A662
  • from 2022Chip: 4A433 MHzFCC: KR5MTXN1GM Outlander (Rogue T33 platform); BCM route like the Rogue

Key with a blade (regular or flip)

  • 2004 - 2006Chip: ID46(US / Canada cars)First-generation CU; 2003 trucks used a plain key
  • 2007 - 2020This yearChip: ID46315 MHzFCC: OUCG8D-625M-A, OUCJ166N(US / Canada cars)CW and GF Outlander keyed ignition (MIT17 key or remote head key)
  • 2016 - 2020Chip: ID46433 MHzFCC: J166E(GCC / Europe cars)GCC remote head key 6370B941

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the Mitsubishi Outlander 2008–2009?

10 listings fit the Mitsubishi Outlander 2008–2009: smart keys, remote keys, key shells, emergency blades and key blanks, in 2-, 3- and 4-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.

What frequency does the Mitsubishi Outlander 2008–2009 remote use?

Listings for the Mitsubishi Outlander 2008–2009 come in 315 MHz and 433 MHz: the frequency depends on the market the car was sold in, so check it against your original remote before ordering.

Which transponder chip does the Mitsubishi Outlander 2008–2009 key use?

The listings for this car carry: ID46 (HITAG 2). Check the chip in each listing's specifications.

Which FCC IDs do Mitsubishi Outlander 2008–2009 remotes carry?

The remotes listed for this car carry FCC ID 0UC003M, 0UCG8D625MA and G8D644MKEYE. Match it with the FCC ID printed on your original remote.

Which blade profile does the Mitsubishi Outlander 2008–2009 key use?

The blades listed for this car: MIT11R · MIT3.

Which tools program a Mitsubishi Outlander 2008–2009 key?

The tool makers' coverage lists name OBDSTAR Key Master G3, Lonsdor K518, Autel KM100 (IKEY universal smart key), Xhorse VVDI Key Tool Max, Xhorse VVDI Key Tool Plus and Launch X-431 IMMO for this car; 2 of them list all keys lost. Check your tool's latest coverage list before the job.

Can the Mitsubishi Outlander 2008–2009 remote be programmed without a tool?

The remote is not programmed on the car by hand: it needs a tool or a dealer.