Skip to content

Mitsubishi Outlander 2020 Key Fob & Car Keys

Keys that fit the 2020 Mitsubishi Outlander: smart keys and remote keys, 2, 3 or 4 buttons, FCC ID GHRM003, 0UC003M or GHRM004, ID46 (HITAG 2) or ID47 (HITAG 3) chip, 315 MHz or 433 MHz. 16 compatible keys, remotes & shells (genuine and aftermarket) available for the 2020 Mitsubishi Outlander.

Last updated: 16 November 2026

Key specifications for the Mitsubishi Outlander 2020

Key types
smart keys, remote keys, key shells, emergency blades and key blanks
Frequency
315 MHz and 433 MHz
Buttons
2-, 3-, 4- and 5-button
Transponder chip
ID46 (HITAG 2) · ID47 (HITAG 3)
Blade profile
MIT11R · MIT3
Part numbers
8637A817 · 8637C817 · 6370B941 · 6370A770 · 8637B107 · 8637B665 · 8637A316
Battery
CR2032
Compatible FCC IDs

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Mitsubishi parts catalogue, with the specifications on each listing. The frequency depends on the market the car was sold in, so check 315 MHz and 433 MHz against your original before ordering.

A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.

Programming the Mitsubishi Outlander 2020 key

Smart key (push to start)

5 tools list this key. 2 of them list all keys lost.

Key with a blade (regular or flip)

4 tools list this key. 1 of them list all keys lost.

All keys lost is listed by OBDSTAR Key Master G3. Lonsdor K518 lists add key only.

Programming steps

Add key - on the car(US / Canada cars)

Needs: two working keys, new key cut to the lock (ID46 transponder or remote head key)

  1. Insert the first working key, turn it ON for 5 seconds, then turn to LOCK and remove it.
  2. Within 30 seconds insert the second working key and turn it ON; about 10 seconds later the immobiliser lamp starts to blink.
  3. Turn that key to LOCK and remove it.
  4. Within 30 seconds insert the new key and turn it ON: the immobiliser lamp stays on (about 3 seconds in some write-ups, 30 in the manual) and goes off when it is registered.
  5. For another key, repeat the whole sequence from the first step.
  6. Start the engine with every key; program the remote buttons with the on-board remote routine (separate case).
Watch out: Needs two registered keys; with one key or none a tool and the PIN are required. Not for vehicles sold in Canada (the manual says the customer routine is disabled there). Each wait is 30 seconds at most; if the lamp goes off early, start again.

Key type not stated by the list

One tool lists this key.

  • Launch X-431 IMMO
    • Add key
    • Remote
    PIN read function

Without a tool

Programming steps

Program the remote without a tool(US / Canada cars)

Needs: one working remote, every remote the customer keeps

  1. Have every remote (old and new) at hand; key out of the ignition.
  2. On a working remote hold UNLOCK for 4 to 10 seconds, then press and hold LOCK as well.
  3. Within 10 seconds release LOCK, then UNLOCK: the locks cycle once to show programming mode.
  4. Within 60 seconds, on the next remote: hold LOCK and UNLOCK together for 2 seconds, release both for 1 second, then press UNLOCK; the locks cycle to confirm.
  5. Repeat the previous step for each further remote within 60 seconds of the last one.
  6. Wait 60 seconds for the mode to end by itself and test every remote.
Watch out: Entering the mode erases every remote except the one used to open it: re-register the others. Up to 8 remotes. Remote buttons only: the key's chip is registered separately.

When the key changed

Smart key (push to start)

  • 2007 - 2020This yearChip: ID46315 MHzFCC: OUC644M-KEY-N(US / Canada cars)F.A.S.T.-key; 2007 fob is OUCG8D-640M-KEY-N
  • 2008 - 2015Chip: ID46433 MHzFCC: G8D-644M-KEY-E(GCC / Europe cars)GCC / Europe F.A.S.T.-key 8637A662
  • from 2022Chip: 4A433 MHzFCC: KR5MTXN1GM Outlander (Rogue T33 platform); BCM route like the Rogue

Key with a blade (regular or flip)

  • 2004 - 2006Chip: ID46(US / Canada cars)First-generation CU; 2003 trucks used a plain key
  • 2007 - 2020This yearChip: ID46315 MHzFCC: OUCG8D-625M-A, OUCJ166N(US / Canada cars)CW and GF Outlander keyed ignition (MIT17 key or remote head key)
  • 2016 - 2020This yearChip: ID46433 MHzFCC: J166E(GCC / Europe cars)GCC remote head key 6370B941

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the Mitsubishi Outlander 2020?

16 listings fit the Mitsubishi Outlander 2020: smart keys, remote keys, key shells, emergency blades and key blanks, in 2-, 3-, 4- and 5-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.

What frequency does the Mitsubishi Outlander 2020 remote use?

Listings for the Mitsubishi Outlander 2020 come in 315 MHz and 433 MHz: the frequency depends on the market the car was sold in, so check it against your original remote before ordering.

Which transponder chip does the Mitsubishi Outlander 2020 key use?

The listings for this car carry: ID46 (HITAG 2) · ID47 (HITAG 3). Check the chip in each listing's specifications.

Which FCC IDs do Mitsubishi Outlander 2020 remotes carry?

The remotes listed for this car carry FCC ID 0UC003M, GHRM003, GHRM004 and J166E. Match it with the FCC ID printed on your original remote.

Which blade profile does the Mitsubishi Outlander 2020 key use?

The blades listed for this car: MIT11R · MIT3.

Which tools program a Mitsubishi Outlander 2020 key?

The tool makers' coverage lists name OBDSTAR Key Master G3, Lonsdor K518, Autel KM100 (IKEY universal smart key), Xhorse VVDI Key Tool Max, Xhorse VVDI Key Tool Plus and Launch X-431 IMMO for this car; 2 of them list all keys lost. Check your tool's latest coverage list before the job.