SKU: B02389
Mitsubishi Raider 2009 Key Fob & Car Keys
Keys that fit the 2006–2009 Mitsubishi Raider: remote keys and transponder keys, 2 buttons, FCC ID K0BDT04A, ID46 (HITAG 2) or CN3 cloning chip chip. 4 compatible keys, remotes & shells (genuine and aftermarket) available for the 2009 Mitsubishi Raider.
Last updated: 15 November 2026
Key specifications for the Mitsubishi Raider 2006–2009
- Key types
- remote keys, transponder keys, key shells and emergency blades
- Buttons
- 2-button
- Transponder chip
- ID46 (HITAG 2) · CN3 cloning chip
- Compatible FCC IDs
To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Mitsubishi parts catalogue, with the specifications on each listing.
A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.
- Chrysler / Dodge / Jeep 2004-2012 Remote Head Key Shell 2-button Big Type with Y159 Blade$1.40In Stock
- $3.37In Stock
- $1.40In Stock
Programming the Mitsubishi Raider 2009 key
Key with a blade (regular or flip)
Programming steps
Add key - on the car(US / Canada cars)
Needs: Transponder key cars, two working programmed keys, the new key, cut to the car
- Insert the first working key and turn ON. Wait about 3 seconds, then turn OFF and remove it.
- Within 15 seconds, insert the second working key and turn ON. After about 10 seconds the immobilizer lamp lights and a tone sounds. Turn OFF and remove it.
- Within 50 seconds, insert the new key and turn ON. After about 10 seconds a tone sounds and the immobilizer lamp stays on for 3 seconds: done.
- For each extra key, start again from step 1.
Add key - on the car(US / Canada cars)
Needs: two working keys, new blank transponder key cut to the vehicle
- Cut the new (never programmed) transponder key to the ignition; have two different keys that already start the vehicle.
- Insert the first working key and turn to ON for at least 3 but no more than 15 seconds, then turn OFF and remove it.
- Within 15 seconds insert the second working key and turn to ON; after about 10 seconds a chime sounds and the security light flashes. Turn OFF and remove it.
- Within 60 seconds (stay under 50 to be safe) insert the new blank key and turn to ON.
- After about 10 seconds a single chime sounds, the light stops flashing, stays on about 3 seconds and goes off: the key is learned.
- For each further key start again from step 2.
Without a tool
The remote is programmed on the car, without a tool. Up to 6 remotes.
Programming steps
Program the remote without a tool(US / Canada cars)
Needs: at least one working original remote with every button working, every key / remote the customer keeps
- Sit in the car with all doors closed and the driver's seat belt on. Nobody else in the car.
- Insert the key and turn the ignition ON without cranking.
- On a working remote, hold UNLOCK for at least 4 seconds, keep holding and press PANIC within 6 seconds. A tone confirms programming mode. Release both.
- Within 60 seconds, on the next remote press LOCK and UNLOCK together for 2 seconds and release; a tone sounds. Within 4 seconds press and release UNLOCK; a tone sounds.
- Repeat the previous step for every remaining remote, working ones included.
- Turn the ignition OFF or wait 60 seconds to exit, then test every remote.
When the key changed
Key with a blade (regular or flip)
- 2006 - 2009This yearChip: ID46Blade: Y164(US / Canada cars)Dakota twin (SKREEM), optional: some trucks have no chip
Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.
Frequently asked questions
Which keys fit the Mitsubishi Raider 2006–2009?
4 listings fit the Mitsubishi Raider 2006–2009: remote keys, transponder keys, key shells and emergency blades, in 2-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.
Which transponder chip does the Mitsubishi Raider 2006–2009 key use?
The listings for this car carry: ID46 (HITAG 2) · CN3 cloning chip. Check the chip in each listing's specifications.
Which FCC IDs do Mitsubishi Raider 2006–2009 remotes carry?
The remotes listed for this car carry FCC ID K0BDT04A. Match it with the FCC ID printed on your original remote.
Can the Mitsubishi Raider 2006–2009 remote be programmed without a tool?
The remote is programmed on the car, without a tool. Up to 6 remotes.



