Skip to content

Nissan 370Z 2010 Key Fob & Car Keys

Keys that fit the 2010 Nissan 370Z: smart keys, 2 or 3 buttons, FCC ID KR55WK49622, ID46 (HITAG 2) chip, 315 MHz. 6 compatible keys, remotes & shells (genuine and aftermarket) available for the 2010 Nissan 370Z.

Last updated: 13 November 2026

Key specifications for the Nissan 370Z 2010

Key types
smart keys, key shells, emergency blades and key blanks
Frequency
315 MHz
Buttons
2- and 3-button
Transponder chip
ID46 (HITAG 2)
Blade profile
NSN14
Battery
CR2032
Compatible FCC IDs

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Nissan parts catalogue, with the specifications on each listing. Every remote listed for the Nissan 370Z 2010 transmits on 315 MHz.

A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.

Programming the Nissan 370Z 2010 key

Smart key (push to start)

7 tools list this key. 3 of them list all keys lost.

All keys lost is listed by OBDSTAR Key Master G3, XTOOL X100 PAD3 / X100 MAX and OBDSTAR X300 DP Plus. Lonsdor K518 lists add key only.

Programming steps

Add key - OBDSTAR X300 DP Plus

Needs: every smart key the customer keeps, PIN read by OBD (BCM code converted to 4-digit PIN by the tool), new smart key (OEM or tool-generated universal key)

  1. Select Nissan > 370Z (Z34, proximity / smart key) > program smart keys; accept the warning that all keys are erased.
  2. Take every smart key out of the car, press the start button once (ignition ON) and turn the hazard lamps on.
  3. Open and close the driver's door when the tool asks.
  4. Let the tool read the 5-character BCM code by OBD and convert it to the 4-digit PIN; on these years choose the 'new' PIN type if asked.
  5. Hold the back (logo side) of the first key against the start button and press start; wait until the security lamp goes out, then switch OFF.
  6. Repeat with each key, existing and new, up to 4.
  7. Close the session: touch the start button with the first programmed key (or brake and press start twice with it), switch OFF, open/close the driver's door, press unlock on a key.
  8. Test unlock, lock and start with every key.
Watch out: The procedure erases every registered key; keys not re-registered stop working. Maximum 4 smart keys. Keep all other smart keys out of the cabin while each key is registered.
All keys lost - OBDSTAR X300 DP Plus

Needs: PIN read by OBD (BCM code converted to 4-digit PIN by the tool), at least two new smart keys (OEM or tool-generated universal keys), emergency blade cut to the door lock

  1. Select Nissan > 370Z (Z34, proximity / smart key) > program smart keys; accept the warning that all keys are erased.
  2. Take every smart key out of the car, press the start button once (ignition ON) and turn the hazard lamps on.
  3. Open and close the driver's door when the tool asks.
  4. Let the tool read the 5-character BCM code by OBD and convert it to the 4-digit PIN; on these years choose the 'new' PIN type if asked.
  5. Hold the back (logo side) of the first key against the start button and press start; wait until the security lamp goes out, then switch OFF.
  6. Repeat with each key, existing and new, up to 4.
  7. Close the session: touch the start button with the first programmed key (or brake and press start twice with it), switch OFF, open/close the driver's door, press unlock on a key.
  8. Test unlock, lock and start with every key.
Watch out: The procedure erases every registered key; keys not re-registered stop working. Maximum 4 smart keys. Keep all other smart keys out of the cabin while each key is registered.

Without a tool

The remote is not programmed on the car by hand: it needs a tool or a dealer.

When the key changed

Smart key (push to start)

  • 2009 - 2017This yearChip: ID46315 MHzFCC: KR55WK49622(US / Canada cars)Z34 push-start Intelligent Key 285E3-1ET5A
  • 2009 - 2019This yearChip: ID46433 MHzFCC: 5WK50196(GCC / Europe cars)GCC / Europe key 285E3-1ET8A

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the Nissan 370Z 2010?

6 listings fit the Nissan 370Z 2010: smart keys, key shells, emergency blades and key blanks, in 2- and 3-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.

What frequency does the Nissan 370Z 2010 remote use?

Every remote listed for the Nissan 370Z 2010 transmits on 315 MHz.

Which transponder chip does the Nissan 370Z 2010 key use?

The listings for this car carry: ID46 (HITAG 2). Check the chip in each listing's specifications.

Which FCC IDs do Nissan 370Z 2010 remotes carry?

The remotes listed for this car carry FCC ID KR55WK49622. Match it with the FCC ID printed on your original remote.

Which blade profile does the Nissan 370Z 2010 key use?

The blades listed for this car: NSN14.

Which tools program a Nissan 370Z 2010 key?

The tool makers' coverage lists name OBDSTAR Key Master G3, XTOOL X100 PAD3 / X100 MAX, OBDSTAR X300 DP Plus, Lonsdor K518, Autel KM100 (IKEY universal smart key) and Xhorse VVDI Key Tool Max for this car; 3 of them list all keys lost. Check your tool's latest coverage list before the job.

Can the Nissan 370Z 2010 remote be programmed without a tool?

The remote is not programmed on the car by hand: it needs a tool or a dealer.