Skip to content

Nissan Altima 2023 Key Fob & Car Keys

Keys that fit the 2023 Nissan Altima: smart keys, 3, 4 or 5 buttons, FCC ID KR5TXN4 or KR5TXN1, 4A (HITAG AES) chip, 433 MHz. 7 compatible keys, remotes & shells (genuine and aftermarket) available for the 2023 Nissan Altima.

Last updated: 12 November 2026

Key specifications for the Nissan Altima 2023

Key types
smart keys, key shells and emergency blades
Frequency
433 MHz
Buttons
3-, 4- and 5-button
Transponder chip
4A (HITAG AES)
Blade profile
NSN14
Battery
CR2032
Compatible FCC IDs

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Nissan parts catalogue, with the specifications on each listing. Every remote listed for the Nissan Altima 2023 transmits on 433 MHz.

A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.

Programming the Nissan Altima 2023 key

Smart key (push to start)

6 tools list this key. 5 of them list all keys lost.

All keys lost is listed by OBDSTAR Key Master G3, Xhorse VVDI Key Tool Max, Xhorse VVDI Key Tool Plus, XTOOL X100 PAD3 / X100 MAX and Autel IM608 II / IM608 Pro II. Lonsdor K518 lists add key only.

Programming steps

Add key - Lonsdor K518 Pro

Needs: every smart key the customer keeps, PIN read by OBD (28-digit code handled by the tool)

  1. Close all doors, ignition OFF, hazards ON; connect by OBD and select Altima 2019- smart key > program smart key (or Autel 'All smart key lost').
  2. Let the tool read the BCM code and confirm it is safe; stop if the BCM part number is on the tool's caution list.
  3. Open and close the driver's door once when asked; accept 'all keys will be deleted' and set the key count (max 4).
  4. Press start once, then within 5 seconds hold the logo end of the first key against the start button: the dash lights and the immobiliser lamp flashes 5 times. Switch OFF.
  5. Repeat for each key, existing and new.
  6. Close: press start and within 5 seconds hold the first programmed key to the button until rapid beeps sound, then switch OFF.
  7. Test remote and start with every key.
Watch out: All keys are erased; maximum 4. Do not run key programming on BCM part numbers 284B1-4CB0A, 284B1-4CB1A, 284B1-4BA0B, 284B1-4BY1A without the tool's specific instruction (flagged by Lonsdor / Autel). Used OEM keys are locked to their first car and must be renewed before reuse.
All keys lost - Autel IM608 Pro II / KM100

Needs: new smart key(s) (OEM or tool-generated), emergency blade cut to get in, PIN read by OBD (28-digit code handled by the tool)

  1. Close all doors, ignition OFF, hazards ON; connect by OBD and select Altima 2019- smart key > program smart key (or Autel 'All smart key lost').
  2. Let the tool read the BCM code and confirm it is safe; stop if the BCM part number is on the tool's caution list.
  3. Open and close the driver's door once when asked; accept 'all keys will be deleted' and set the key count (max 4).
  4. Press start once, then within 5 seconds hold the logo end of the first key against the start button: the dash lights and the immobiliser lamp flashes 5 times. Switch OFF.
  5. Repeat for each key, existing and new.
  6. Close: press start and within 5 seconds hold the first programmed key to the button until rapid beeps sound, then switch OFF.
  7. Test remote and start with every key.
Watch out: All keys are erased; maximum 4. Do not run key programming on BCM part numbers 284B1-4CB0A, 284B1-4CB1A, 284B1-4BA0B, 284B1-4BY1A without the tool's specific instruction (flagged by Lonsdor / Autel). Used OEM keys are locked to their first car and must be renewed before reuse.

Key type not stated by the list

One tool lists this key.

  • Launch X-431 IMMO
    • Add key

When the key changed

Smart key (push to start)

  • 2007 - 2012Chip: ID46315 MHzFCC: KR55WK48903(US / Canada cars)
  • 2013 - 2015Chip: ID47433 MHzFCC: KR5S180144014Same FCC ID as the later 4A key; check the part number
  • from 2016This yearChip: 4A433 MHzFCC: KR5S180144014, KR5TXN1, KR5TXN42016-2018 keys share FCC KR5S180144014 with the ID47 key

Key with a blade (regular or flip)

  • 2000 - 2004Chip: 4D-60
  • 2005 - 2006Chip: ID46

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the Nissan Altima 2023?

7 listings fit the Nissan Altima 2023: smart keys, key shells and emergency blades, in 3-, 4- and 5-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.

What frequency does the Nissan Altima 2023 remote use?

Every remote listed for the Nissan Altima 2023 transmits on 433 MHz.

Which transponder chip does the Nissan Altima 2023 key use?

The listings for this car carry: 4A (HITAG AES). Check the chip in each listing's specifications.

Which FCC IDs do Nissan Altima 2023 remotes carry?

The remotes listed for this car carry FCC ID KR5TXN1 and KR5TXN4. Match it with the FCC ID printed on your original remote.

Which blade profile does the Nissan Altima 2023 key use?

The blades listed for this car: NSN14.

Which tools program a Nissan Altima 2023 key?

The tool makers' coverage lists name OBDSTAR Key Master G3, Xhorse VVDI Key Tool Max, Xhorse VVDI Key Tool Plus, XTOOL X100 PAD3 / X100 MAX, Autel IM608 II / IM608 Pro II and Lonsdor K518 for this car; 5 of them list all keys lost. Check your tool's latest coverage list before the job.