Skip to content

Nissan Juke 2014 Key Fob & Car Keys

Keys that fit the 2014 Nissan Juke: smart keys, flip keys and remote keys, 2, 3 or 4 buttons, FCC ID CWTWB1U825, CWTWB1G767 or CWTWB1U808, ID46 (HITAG 2) or CN3 cloning chip chip, 315 MHz or 433 MHz. 36 compatible keys, remotes & shells (genuine and aftermarket) available for the 2014 Nissan Juke.

Last updated: 15 November 2026

Key specifications for the Nissan Juke 2014

Key types
smart keys, flip keys, remote keys, transponder keys, key shells, emergency blades and key blanks
Frequency
315 MHz and 433 MHz
Buttons
2-, 3- and 4-button
Transponder chip
ID46 (HITAG 2) · CN3 cloning chip · 4A (HITAG AES)
Blade profile
NSN14 · DA34
Part numbers
H0561-3AA0B · H0561-C993A · 28268-4BA1A / H0561-4BA1A · H0561-1HA1A · H0561-1HB1A
Battery
CR2032 · CR2025 · CR1620

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Nissan parts catalogue, with the specifications on each listing. The frequency depends on the market the car was sold in, so check 315 MHz and 433 MHz against your original before ordering.

A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.

Programming the Nissan Juke 2014 key

Smart key (push to start)

7 tools list this key. 2 of them list all keys lost.

All keys lost is listed by OBDSTAR Key Master G3 and XTOOL X100 PAD3 / X100 MAX. Advanced Diagnostics Smart Pro and Lonsdor K518 list add key only.

Key with a blade (regular or flip)

3 tools list this key. 2 of them list all keys lost.

  • OBDSTAR Key Master G3
    • Add key
    • All keys lost
    • Remote
    reads the PIN by OBD
  • XTOOL X100 PAD3 / X100 MAX
    • Add key
    • All keys lost
    • Remote
    PIN read function
    • Add key
    • Remote

All keys lost is listed by OBDSTAR Key Master G3 and XTOOL X100 PAD3 / X100 MAX. Lonsdor K518 lists add key only.

Key type not stated by the list

One tool lists this key.

  • Launch X-431 IMMO
    • Add key

Without a tool

The remote is programmed on the car, without a tool.

Programming steps

Program the remote without a tool(US / Canada cars)

Needs: Remote head key, remote part only, every remote the customer keeps

  1. Close all doors and lock them with the driver's power lock switch.
  2. Insert the key and pull it fully out at least 6 times within 10 seconds. The hazard lamps flash when it worked.
  3. Insert the key and turn it to ACC.
  4. Within 5 seconds, press any button on the remote once. The hazard lamps flash.
  5. For each remaining remote, old ones included: unlock then lock with the driver's power lock switch, and within 5 seconds press any button on the next remote once. The hazard lamps flash.
  6. Turn the key OFF and remove it, unlock with the driver's power lock switch and open the driver's door.
Watch out: Programming erases every stored remote: have all remotes on hand and program them all. Press the remote button only once; a second press makes the programming fail. Pull the key fully out each time; going too fast will not enter programming mode.

When the key changed

Smart key (push to start)

  • 2010 - 2019This yearChip: ID46433 MHzFCC: CWTWB1U825, TWB1G662(GCC / Europe cars)
  • 2011 - 2017This yearChip: ID46315 MHzFCC: CWTWB1U808(US / Canada cars)
  • from 2020Chip: 4A433 MHz(GCC / Europe cars)F16 Juke, part 285E3-5MS0C

Key with a blade (regular or flip)

  • 2010 - 2014This yearChip: ID46433 MHz(GCC / Europe cars)F15 remote key before the 2014 facelift
  • 2011 - 2017This yearChip: ID46315 MHzFCC: CWTWB1U751(US / Canada cars)US Juke S remote head key

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the Nissan Juke 2014?

36 listings fit the Nissan Juke 2014: smart keys, flip keys, remote keys, transponder keys, key shells, emergency blades and key blanks, in 2-, 3- and 4-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.

What frequency does the Nissan Juke 2014 remote use?

Listings for the Nissan Juke 2014 come in 315 MHz and 433 MHz: the frequency depends on the market the car was sold in, so check it against your original remote before ordering.

Which transponder chip does the Nissan Juke 2014 key use?

The listings for this car carry: ID46 (HITAG 2) · CN3 cloning chip · 4A (HITAG AES). Check the chip in each listing's specifications.

Which FCC IDs do Nissan Juke 2014 remotes carry?

The remotes listed for this car carry FCC ID CWTWB1G767, CWTWB1U751, CWTWB1U761, CWTWB1U773, CWTWB1U808, CWTWB1U825 and TWB1G662. Match it with the FCC ID printed on your original remote.

Which blade profile does the Nissan Juke 2014 key use?

The blades listed for this car: NSN14 · DA34.

Which tools program a Nissan Juke 2014 key?

The tool makers' coverage lists name OBDSTAR Key Master G3, XTOOL X100 PAD3 / X100 MAX, Advanced Diagnostics Smart Pro, Lonsdor K518, Autel KM100 (IKEY universal smart key) and Xhorse VVDI Key Tool Max for this car; 2 of them list all keys lost. Check your tool's latest coverage list before the job.

Can the Nissan Juke 2014 remote be programmed without a tool?

The remote is programmed on the car, without a tool.