Nissan NV1500 2016 Key Fob & Car Keys
Keys that fit the 2012–2019 Nissan NV1500: transponder keys, CN3 cloning chip chip. 3 compatible keys, remotes & shells (genuine and aftermarket) available for the 2016 Nissan NV1500.
Last updated: 12 November 2026
Key specifications for the Nissan NV1500 2012–2019
- Key types
- transponder keys, key shells and emergency blades
- Transponder chip
- CN3 cloning chip
- Blade profile
- NSN14
To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Nissan parts catalogue, with the specifications on each listing.
A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.
Programming the Nissan NV1500 2016 key
Key with a blade (regular or flip)
2 tools list this key. 2 of them list all keys lost.
- Advanced Diagnostics AD100 Pro / MVP Pro
- Add key(US / Canada cars)
- All keys lost(US / Canada cars)
- Advanced Diagnostics Smart Pro
- Add key(US / Canada cars)
- All keys lost(US / Canada cars)
Programming steps
Add key - Advanced Diagnostics Smart Pro / MVP Pro (Nissan CAN keyed ignition)(US / Canada cars)
Needs: working key (any one, to switch ON), PIN read by OBD (BCM code converted to 4-digit PIN by the tool), every key the customer keeps
- Gather every key the customer keeps; cut the new ID46 key so it turns the ignition.
- Connect by OBD and select Nissan > NV1500 (keyed ignition, CAN / NATS 5) > program keys.
- Switch ON with a key in the barrel; the tool reads the BCM code by OBD and converts it to the 4-digit PIN (newer conversion on about 2009-on cars).
- Confirm programming; the BCM clears its stored keys at this point.
- With the key in the barrel, switch ON for about 8 seconds, then OFF and remove it.
- Insert the next key (new or existing), ON for about 8 seconds, OFF, remove; repeat for up to 4 keys.
- Close the session: switch ON again with the first key for about 8 seconds, then OFF.
- Start the engine with every key; program the remote buttons on board (separate case) if they do not work.
All keys lost - Advanced Diagnostics Smart Pro / MVP Pro (Nissan CAN keyed ignition)(US / Canada cars)
Needs: new keys cut to the lock (code or decode), PIN read by OBD (BCM code converted to 4-digit PIN by the tool)
- Cut two or more new ID46 keys to the lock (code or decode) so they turn the ignition.
- Connect by OBD and select Nissan > NV1500 (keyed ignition, CAN / NATS 5) > program keys.
- Switch ON with a new key; the tool reads the BCM code and works out the 4-digit PIN (no working key needed).
- Confirm programming; the BCM clears all stored keys, the lost ones included.
- Key in, ON for about 8 seconds, OFF, remove; repeat with each new key (up to 4).
- Close the session: switch ON again with the first key for about 8 seconds, then OFF.
- Start the engine with every key, then program the remote buttons if they do not work.
Without a tool
Programming steps
Program the remote without a tool(US / Canada cars)
Needs: working ignition key, every remote the customer keeps
- Sit inside, close all doors and lock them with the driver's power lock switch.
- Insert the key fully and pull it fully out at least 6 times within 10 seconds (about one per second) until the hazard lamps flash.
- Insert the key and turn it to ACC.
- Within 5 seconds press one button (LOCK) on the first remote once; the hazards flash.
- For each further remote, old ones too: unlock then lock with the driver's switch, then within 5 seconds press the next remote once.
- Turn the key OFF, remove it, unlock with the driver's switch and open the driver's door to leave the mode; test every remote.
When the key changed
Key with a blade (regular or flip)
- 2012 - 2021This yearChip: ID46315 MHzFCC: CWTWB1U751(US / Canada cars)Plain ID46 key or remote head key; early vans had a separate fob
Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.
Frequently asked questions
Which keys fit the Nissan NV1500 2012–2019?
3 listings fit the Nissan NV1500 2012–2019: transponder keys, key shells and emergency blades. Match the part number or FCC ID printed on your original key with the specifications on each listing.
Which transponder chip does the Nissan NV1500 2012–2019 key use?
The listings for this car carry: CN3 cloning chip. Check the chip in each listing's specifications.
Which blade profile does the Nissan NV1500 2012–2019 key use?
The blades listed for this car: NSN14.
Which tools program a Nissan NV1500 2012–2019 key?
The tool makers' coverage lists name Advanced Diagnostics AD100 Pro / MVP Pro and Advanced Diagnostics Smart Pro for this car; 2 of them list all keys lost. Check your tool's latest coverage list before the job.


