Skip to content

Nissan Qashqai 2007–2013 Key Fob & Car Keys

Keys that fit the 2007–2013 Nissan Qashqai: smart keys and remote keys, 2 buttons, FCC ID 5WK4876, ID46 (HITAG 2) chip, 433 MHz. 9 compatible keys, remotes & shells (genuine and aftermarket) available for the 2007 Nissan Qashqai.

Last updated: 14 November 2026

Key specifications for the Nissan Qashqai 2007–2013

Key types
smart keys, remote keys, key shells, emergency blades and key blanks
Frequency
433 MHz
Buttons
2-button
Transponder chip
ID46 (HITAG 2)
Blade profile
NSN14
Part numbers
285E3-BC40A · 28268-AX61A / 28268-AX600
Battery
CR2032
Compatible FCC IDs

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Nissan parts catalogue, with the specifications on each listing. Every remote listed for the Nissan Qashqai 2007–2013 transmits on 433 MHz.

A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.

Programming the Nissan Qashqai 2007 key

Smart key (push to start)

2 tools list this key. 1 of them list all keys lost.

  • XTOOL X100 PAD3 / X100 MAX
    • Add key
    • All keys lost
    • Remote(non-US cars)
    PIN read function
    • Add key
    • Remote

All keys lost is listed by XTOOL X100 PAD3 / X100 MAX. Lonsdor K518 lists add key only.

Key with a blade (regular or flip)

4 tools list this key. 3 of them list all keys lost.

  • OBDSTAR Key Master G3
    • Add key
    • All keys lost
    • Remote
    reads the PIN by OBD
  • XTOOL X100 PAD3 / X100 MAX
    • Add key
    • All keys lost
    • Remote
    PIN read function
    • All keys lost(non-US cars)
    • Add key
    • Remote

All keys lost is listed by OBDSTAR Key Master G3, XTOOL X100 PAD3 / X100 MAX and Autel IM608 II / IM608 Pro II. Lonsdor K518 lists add key only.

Programming steps

Add key - Lonsdor K518ISE / K518 Pro(GCC / Europe cars)

Needs: working key (any one, to switch ON), PIN read by OBD (the tool reads it from the BCM), every key the customer keeps

  1. Gather every key the customer keeps; cut the new ID46 remote key (NSN14) so it turns the ignition.
  2. Connect by OBD, battery above 12 V, and select Nissan > Immobilizer > automatic retrieval > add key (Lonsdor) or Qashqai (J10) > immobiliser on your tool.
  3. Switch ON with a working key; the tool reads the PIN from the BCM by OBD.
  4. Insert the new key with the Nissan logo facing up and switch ON when the tool asks; switch fully OFF when told.
  5. Register every other key the same way in the same session if the tool asks for them.
  6. Start the engine with every key and test the remote buttons (on these keys the remote usually learns with the chip).
  7. Clear the NATS fault codes the session leaves.
Watch out: Some tools clear every stored key during registration: bring every key the customer keeps. A key inserted upside down (logo down) fails the read and looks like a chip fault.
All keys lost - Autel IM508 / IM608 (Nissan blade key learning)(GCC / Europe cars)

Needs: new keys cut to the lock (code or decode), PIN read by OBD (the tool reads it from the BCM), battery support (above 12 V)

  1. Cut two new keys (NSN14) to the lock by code or decode so they turn the ignition.
  2. Connect by OBD with the battery above 12 V and select Qashqai (J10) > immobiliser > blade key learning (all keys lost).
  3. Let the tool read the PIN from the BCM by OBD.
  4. When the tool asks: ignition fully OFF (LOCK), key out, then open and close the driver's door.
  5. Insert each new key with the Nissan logo facing up and switch ON / OFF as the tool prompts until every key is learned.
  6. On Intelligent Key cars, learn the remote / proximity part afterwards as a separate step.
  7. Start the engine with every key, test the remotes and clear the NATS fault codes.
Watch out: Every stored key is erased: program a second key in the same session. On Intelligent Key cars take the batteries out of the fobs during blade key learning, then refit them for the remote step.

When the key changed

Smart key (push to start)

  • 2007 - 2013This yearChip: ID46433 MHz(GCC / Europe cars)J10 Intelligent Key 285E3-4X00A (twist or push start)
  • 2014 - 2021Chip: 4A433 MHz(GCC / Europe cars)J11 Intelligent Key (285E3-4CB0C / 4CB5C)
  • from 2021Chip: 4A433 MHzFCC: KR5TXN1(GCC / Europe cars)J12 Intelligent Key; BCM bypass cable on most tools

Key with a blade (regular or flip)

  • 2007 - 2013This yearChip: ID46433 MHz(GCC / Europe cars)J10 remote key (28268 series) or plain NSN14 key
  • 2014 - 2021Chip: 4A(GCC / Europe cars)J11 flip key on keyed-ignition trims

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the Nissan Qashqai 2007–2013?

9 listings fit the Nissan Qashqai 2007–2013: smart keys, remote keys, key shells, emergency blades and key blanks, in 2-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.

What frequency does the Nissan Qashqai 2007–2013 remote use?

Every remote listed for the Nissan Qashqai 2007–2013 transmits on 433 MHz.

Which transponder chip does the Nissan Qashqai 2007–2013 key use?

The listings for this car carry: ID46 (HITAG 2). Check the chip in each listing's specifications.

Which FCC IDs do Nissan Qashqai 2007–2013 remotes carry?

The remotes listed for this car carry FCC ID 5WK4876. Match it with the FCC ID printed on your original remote.

Which blade profile does the Nissan Qashqai 2007–2013 key use?

The blades listed for this car: NSN14.

Which tools program a Nissan Qashqai 2007–2013 key?

The tool makers' coverage lists name XTOOL X100 PAD3 / X100 MAX, Lonsdor K518, OBDSTAR Key Master G3 and Autel IM608 II / IM608 Pro II for this car; 3 of them list all keys lost. Check your tool's latest coverage list before the job.