Skip to content

Nissan Qashqai 2016–2017 Key Fob & Car Keys

Keys that fit the 2016–2017 Nissan Qashqai: smart keys, flip keys and remote keys, 2 or 3 buttons, FCC ID CWTWB1G767, 5WK4876 or S180144102, PCF7939MA type, aftermarket or ID46 (HITAG 2) chip, 433 MHz. 16 compatible keys, remotes & shells (genuine and aftermarket) available for the 2016 Nissan Qashqai.

Last updated: 17 November 2026

Key specifications for the Nissan Qashqai 2016–2017

Key types
smart keys, flip keys, remote keys, key shells and emergency blades
Frequency
433 MHz
Buttons
2- and 3-button
Transponder chip
PCF7939MA type, aftermarket · ID46 (HITAG 2) · 4A (HITAG AES)
Blade profile
NSN14 · DA34
Part numbers
28268-AX61A / 28268-AX600 · H0561-4CA0B · 28268-4BA1A / H0561-4BA1A
Battery
CR2032

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Nissan parts catalogue, with the specifications on each listing. Every remote listed for the Nissan Qashqai 2016–2017 transmits on 433 MHz.

A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.

Programming the Nissan Qashqai 2016 key

Smart key (push to start)

4 tools list this key. 2 of them list all keys lost.

All keys lost is listed by OBDSTAR Key Master G3 and XTOOL X100 PAD3 / X100 MAX. Lonsdor K518 lists add key only.

Programming steps

Add key - Lonsdor K518ISE / K518 Pro(GCC / Europe cars)

Needs: working smart key, PIN calculated by the tool by OBD, every smart key the customer keeps, new smart key of the same type (4A, 433 MHz)

  1. Read the BCM part number first (behind the dash) and write it down; then connect by OBD.
  2. Select Immobilizer > Nissan > Select from vehicle > New X-Trail > 2017 > With smart (the Qashqai J11 menu on Lonsdor) > program smart key; ignition ON, let the tool work out the PIN.
  3. Close all doors, press start, then switch OFF and turn the hazard lamps on; accept that all smart keys will be deleted (max 4).
  4. Press start and within 5 seconds hold the logo end of the first key to the start button: the dash comes on and the security lamp flashes 5 times.
  5. Switch OFF, wait about 5 seconds, take that key out of the car and repeat with each key, old and new.
  6. Close: press start and hold the first programmed key to the button until the buzzer sounds, then switch OFF.
  7. Test start, lock and unlock with every key.
Watch out: All smart keys are deleted: register every key the customer keeps in the same session. With a working key present the job is add key; do not run all keys lost on a BCM 284B1 whose part number ends 0A to 4A (the module can be bricked). Keep every other smart key out of the cabin while each key is registered.

Key with a blade (regular or flip)

3 tools list this key. 2 of them list all keys lost.

  • XTOOL X100 PAD3 / X100 MAX
    • Add key
    • All keys lost
    • Remote
    PIN read function
  • OBDSTAR Key Master G3
    • All keys lost
    • Remote
    reads the PIN by OBD
    • Add key

All keys lost is listed by XTOOL X100 PAD3 / X100 MAX and OBDSTAR Key Master G3. Lonsdor K518 lists add key only.

When the key changed

Smart key (push to start)

  • 2007 - 2013Chip: ID46433 MHz(GCC / Europe cars)J10 Intelligent Key 285E3-4X00A (twist or push start)
  • 2014 - 2021This yearChip: 4A433 MHz(GCC / Europe cars)J11 Intelligent Key (285E3-4CB0C / 4CB5C)
  • from 2021Chip: 4A433 MHzFCC: KR5TXN1(GCC / Europe cars)J12 Intelligent Key; BCM bypass cable on most tools

Key with a blade (regular or flip)

  • 2007 - 2013Chip: ID46433 MHz(GCC / Europe cars)J10 remote key (28268 series) or plain NSN14 key
  • 2014 - 2021This yearChip: 4A(GCC / Europe cars)J11 flip key on keyed-ignition trims

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the Nissan Qashqai 2016–2017?

16 listings fit the Nissan Qashqai 2016–2017: smart keys, flip keys, remote keys, key shells and emergency blades, in 2- and 3-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.

What frequency does the Nissan Qashqai 2016–2017 remote use?

Every remote listed for the Nissan Qashqai 2016–2017 transmits on 433 MHz.

Which transponder chip does the Nissan Qashqai 2016–2017 key use?

The listings for this car carry: PCF7939MA type, aftermarket · ID46 (HITAG 2) · 4A (HITAG AES). Check the chip in each listing's specifications.

Which FCC IDs do Nissan Qashqai 2016–2017 remotes carry?

The remotes listed for this car carry FCC ID 5WK4876, CWTWB1G767, S180144102 and S180144104. Match it with the FCC ID printed on your original remote.

Which blade profile does the Nissan Qashqai 2016–2017 key use?

The blades listed for this car: NSN14 · DA34.

Which tools program a Nissan Qashqai 2016–2017 key?

The tool makers' coverage lists name OBDSTAR Key Master G3, XTOOL X100 PAD3 / X100 MAX, Lonsdor K518 and Autel KM100 (IKEY universal smart key) for this car; 2 of them list all keys lost. Check your tool's latest coverage list before the job.