Skip to content

Nissan Rogue 2023 Key Fob & Car Keys

Keys that fit the 2023 Nissan Rogue: smart keys, 2, 3 or 4 buttons, FCC ID KR5TXPZ3 or KR5TXPZ1, 4A (HITAG AES) chip, 315 MHz or 433 MHz. 17 compatible keys, remotes & shells (genuine and aftermarket) available for the 2023 Nissan Rogue.

Last updated: 12 November 2026

Key specifications for the Nissan Rogue 2023

Key types
smart keys, key shells, emergency blades and key blanks
Frequency
315 MHz and 433 MHz
Buttons
2-, 3-, 4- and 5-button
Transponder chip
4A (HITAG AES)
Blade profile
NSN14
Part numbers
H0564-5MP0A
Battery
CR2032
Compatible FCC IDs

To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Nissan parts catalogue, with the specifications on each listing. The frequency depends on the market the car was sold in, so check 315 MHz and 433 MHz against your original before ordering.

A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.

Programming the Nissan Rogue 2023 key

Smart key (push to start)

4 tools list this key. 2 of them list all keys lost.

  • OBDSTAR Key Master G3
    • Add key
    • All keys lost
    • Remote
    reads the PIN by OBD · all keys lost on the bench
  • XTOOL X100 PAD3 / X100 MAX
    • Add key
    • All keys lost
    • Add key(US / Canada cars)
    • Add key(US / Canada cars)

All keys lost is listed by OBDSTAR Key Master G3 and XTOOL X100 PAD3 / X100 MAX. Autel IM508S and Autel IM608 II / IM608 Pro II list add key only.

Programming steps

Add key - Autel IM508S / IM608 II + Nissan 40-pin BCM adapter(US / Canada cars)

Needs: working smart key, Nissan 40-pin BCM adapter, trim tools to reach the BCM, no PIN entry: the tool works through the BCM adapter

  1. Remove the lower dash trim under the steering column to reach the BCM.
  2. Unplug the BCM connector and fit the 40-pin adapter between the harness and the BCM; plug its OBD lead into the car and the tool.
  3. Select Rogue (T33) > add smart key; hazards ON, ignition ON, confirm the VIN, then hold start to switch OFF.
  4. Hazards ON, gear in P, wait for the steering lock to release, then continue.
  5. Lay the working key flat on the start button without pressing its buttons to read its ID; then read the new key the same way.
  6. Program: put each key on the start button when asked until the tool shows every key learned.
  7. Test lock, unlock and start with every key.
  8. Remove the adapter, reconnect the BCM, refit the trim and clear any fault codes.
Watch out: Some tools erase every stored key in this job: keep all the customer's keys at hand. If a warning lamp stays on after programming, disconnect the battery for 2-3 minutes. Never swap in a used BCM to make keys: a new BCM must be configured before it is paired (Nissan bulletin NTB20-074).

When the key changed

Smart key (push to start)

  • 2008 - 2013Chip: ID46315 MHzFCC: CWTWBU729(US / Canada cars)Intelligent Key trims (S35)
  • from 2014This yearChip: 4A433 MHzFCC: KR5S180144106, KR5TXN3, KR5TXN4, KR5TXPZ32021 on (T33): BCM reached through a 40-pin adapter

Key with a blade (regular or flip)

  • 2008 - 2015Chip: ID46315 MHzFCC: CWTWB1U751(US / Canada cars)Keyed-ignition trims; Rogue Select 2014-2015 keeps this key
  • 2014 - 2020Chip: 4A433 MHzFCC: CWTWB1G767(US / Canada cars)Flip key on keyed-ignition trims (T32)

Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.

Frequently asked questions

Which keys fit the Nissan Rogue 2023?

17 listings fit the Nissan Rogue 2023: smart keys, key shells, emergency blades and key blanks, in 2-, 3-, 4- and 5-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.

What frequency does the Nissan Rogue 2023 remote use?

Listings for the Nissan Rogue 2023 come in 315 MHz and 433 MHz: the frequency depends on the market the car was sold in, so check it against your original remote before ordering.

Which transponder chip does the Nissan Rogue 2023 key use?

The listings for this car carry: 4A (HITAG AES). Check the chip in each listing's specifications.

Which FCC IDs do Nissan Rogue 2023 remotes carry?

The remotes listed for this car carry FCC ID KR5TXPZ1 and KR5TXPZ3. Match it with the FCC ID printed on your original remote.

Which blade profile does the Nissan Rogue 2023 key use?

The blades listed for this car: NSN14.

Which tools program a Nissan Rogue 2023 key?

The tool makers' coverage lists name OBDSTAR Key Master G3, XTOOL X100 PAD3 / X100 MAX, Autel IM508S and Autel IM608 II / IM608 Pro II for this car; 2 of them list all keys lost. Check your tool's latest coverage list before the job.