Nissan Sunny 2012–2013 Key Fob & Car Keys
Keys that fit the 2012–2013 Nissan Sunny: flip keys and remote keys, 2, 3 or 4 buttons, FCC ID CWTWB1U761, ID46 (HITAG 2) chip, 433 MHz. 4 compatible keys, remotes & shells (genuine and aftermarket) available for the 2012 Nissan Sunny.
Last updated: 12 November 2026
Key specifications for the Nissan Sunny 2012–2013
- Key types
- flip keys, remote keys, key shells, emergency blades and key blanks
- Frequency
- 433 MHz
- Buttons
- 2-, 3- and 4-button
- Transponder chip
- ID46 (HITAG 2)
- Blade profile
- NSN14
- Part numbers
- H0561-1HB1A · H0561-3AA0E
- Compatible FCC IDs
To pick the right part, match the part number or FCC ID printed on your original remote, or listed in the Nissan parts catalogue, with the specifications on each listing. Every remote listed for the Nissan Sunny 2012–2013 transmits on 433 MHz.
A new smart key or remote has to be programmed to the car with a key programmer, and when every key is lost the programming is still done through the diagnostic port. We ship the key worldwide from the UAE by DHL and FedEx; any automotive locksmith or the dealer can cut and program it.
Programming the Nissan Sunny 2012 key
Smart key (push to start)
2 tools list this key. 1 of them list all keys lost.
- XTOOL X100 PAD3 / X100 MAX
- Add key
- All keys lost
reads the PIN by OBD - Universal key
Key with a blade (regular or flip)
3 tools list this key. 3 of them list all keys lost.
- OBDSTAR Key Master G3
- Add key
- All keys lost
- Remote
reads the PIN by OBD - XTOOL X100 PAD3 / X100 MAX
- Add key
- All keys lost
- Remote
PIN read function - Add key(non-US cars)
- All keys lost(non-US cars)
Programming steps
Add key - Lonsdor K518ISE / K518 Pro(GCC / Europe cars)
Needs: working key (any one, to switch ON), PIN read by OBD (BCM code converted to 4-digit PIN by the tool), every key the customer keeps
- Collect every key the customer wants to keep; the new key must be cut and be the remote-head Hitag2 (ID46) type the car uses.
- Connect the tool by OBD and select Nissan > Immobilizer > automatic retrieval (Lonsdor) or the Sunny / BCM blade-key menu on your tool.
- Switch the ignition ON with a key in the barrel; the tool reads the BCM code by OBD and converts it to the 4-digit PIN.
- Confirm key programming; the BCM clears its stored keys at this point.
- With the key in the barrel, switch ON for about 5-8 seconds, then OFF and remove it.
- Insert the next key (new or existing), switch ON for 5-8 seconds, then OFF; repeat for up to 4 keys.
- Close the session as the tool says (some tools ask you to switch ON again with the first key), then start the engine with every key.
- If the lock buttons do not work, run the tool's remote learning (or the on-board remote routine for the market) as a separate step.
All keys lost - Lonsdor K518ISE / K518 Pro(GCC / Europe cars)
Needs: new key cut to the lock (code or decode), PIN read by OBD (BCM code converted to 4-digit PIN by the tool)
- Cut the new key(s) mechanically first so they turn the ignition.
- Connect by OBD, select the Sunny / BCM blade-key immobiliser menu.
- Switch the ignition ON with a new key; the tool reads the BCM code and works out the 4-digit PIN (no working key needed).
- Run key programming; the BCM clears all stored keys.
- Key in, ignition ON for 5-8 seconds, OFF, remove; repeat with each new key (up to 4).
- Close the session as prompted, start the engine with each key.
- Program the remote buttons separately if they do not work after the immobiliser step.
Key type not stated by the list
One tool lists this key.
- Launch X-431 IMMO
- Add key
Without a tool
Programming steps
Program the remote without a tool(US / Canada cars)
Needs: working ignition key, every remote the customer keeps
- Sit inside, close all doors and lock them with the driver's power lock switch.
- Insert the key fully and pull it fully out at least 6 times within 10 seconds (about one per second) until the hazard lamps flash.
- Insert the key and turn it to ACC.
- Within 5 seconds press one button on the first remote once; the hazards flash.
- For each further remote (including the old ones): unlock then lock with the driver's switch, then within 5 seconds press a button on the next remote.
- Turn the key OFF, remove it, unlock with the driver's switch and open the driver's door to leave programming mode; test every remote.
When the key changed
Smart key (push to start)
- 2011 - 2019This yearChip: ID46433 MHzFCC: CWTWB1U787(GCC / Europe cars)Push-to-start trims of the N17 Sunny
- 2020 - 2024Chip: 4A433 MHzFCC: KR5TXN1Same key as the US Versa; SL grade push start
Key with a blade (regular or flip)
- 2012 - 2019This yearChip: ID46433 MHzBlade: NSN14FCC: CWTWB1U761(GCC / Europe cars)N17 Sunny remote head key
- 2021 - 2024Chip: 4A433 MHzFCC: CWTWB1G767N18 Sunny and Versa flip key
Check coverage first: support depends on the tool's software version and the exact model. A tool that is not shown here may still cover this car.
Frequently asked questions
Which keys fit the Nissan Sunny 2012–2013?
4 listings fit the Nissan Sunny 2012–2013: flip keys, remote keys, key shells, emergency blades and key blanks, in 2-, 3- and 4-button versions. Match the part number or FCC ID printed on your original key with the specifications on each listing.
What frequency does the Nissan Sunny 2012–2013 remote use?
Every remote listed for the Nissan Sunny 2012–2013 transmits on 433 MHz.
Which transponder chip does the Nissan Sunny 2012–2013 key use?
The listings for this car carry: ID46 (HITAG 2). Check the chip in each listing's specifications.
Which FCC IDs do Nissan Sunny 2012–2013 remotes carry?
The remotes listed for this car carry FCC ID CWTWB1U761. Match it with the FCC ID printed on your original remote.
Which blade profile does the Nissan Sunny 2012–2013 key use?
The blades listed for this car: NSN14.
Which tools program a Nissan Sunny 2012–2013 key?
The tool makers' coverage lists name XTOOL X100 PAD3 / X100 MAX, Autel KM100 (IKEY universal smart key), OBDSTAR Key Master G3, Lonsdor K518 and Launch X-431 IMMO for this car; 3 of them list all keys lost. Check your tool's latest coverage list before the job.



